The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
Five Ten Women's Trailcross CLI Clip-In Cycle ShoesGet your exploration fix with the comfort of the Five Ten Women's Trailcross CLI Clip-In Cycle Shoes. On the bike they provide an easy clip-in pedal sole design while hike-a-bike utility comes via a super grippy sole and flexible, lightweight upper. Lightweight, breathable and yet made tough, the Women's Trailcross CLI Clip-In Cycle Shoes are made for the joys of off-road exploration. While the textile upper lets your skin breathe, the impact-resistant toe box and abrasion-resistant overlays provide reliable protection. ideal for when you're tackling rough routes both on and off the bike. A cushioned midsole adds comfort and flexibility for hiking and the Stealth® Marathon rubber tread provides tenacious grip levels when scrambling over rocks and roots. When you're on your bike, the sole design makes it easy to clip in and out of clipless pedals. No fuss, simply click, pedal and you'll be flying along the trail. But if you do find yourself clipped out over rough terrain, the grippy Stealth® Marathon rubber tread holds firm on the pedal body until you clip back in. Sustainable PerformanceThe Women's Trailcross CLI also do their bit for the environment, reducing reliance on virgin plastics. They're made in part from production waste, recycled from cutting scraps and post-consumer household waste. In fact, 25% of the components used to make the uppers are made with a minimum of 50% recycled content. This reduces the environmental harm that comes with the production of new plastics. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Breathable sock-like constructionStealth® Phantom rubber outsoleLightweight EVA midsole for supportTough and reliable lace closure with hook-and-loop top strapTextile upper with abrasion-resistant overlays and reflective detailsImpact-resistant toe boxMade in part with recycled content generated from production wasteWeight: 435g (size UK 8.5)2-bolt cleat compatible (cleats not supplied)Buy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.