Our plus tire master, the 35 mm HX 581 is super strong, yet light and reliable and loves to smash through the rough like no other. The ideal rim for tires over 2.4" and designed from the ground up to deliver a long service life under the harshest conditions.Key Features:E-MTB's are a whole ton of fun but there's no denying that they are extremely hard on components, especially wheels,It's not just the extra mass; the huge, sustained torque an E-bike and rider can produce means standard wheels simply don't last,This is where DT's Mission Hybrid comes in, a whole line of wheels and components specifically designed to go the distance under regular E-MTB usage,For the Hybrid rims the key difference is a thicker, reinforced spoke bed, increasing Pull-through force by 20% at a key failure point for E-MTBs and greatly extending fatigue life for minimal weight gain,The tubeless ready optimized rim bed provides fast tire installation, a great tire fit, and quick trouble-free tubeless setup,The DT Swiss welding process leaves an extremely consistent and strong weld joint,The included PHR washers and convex Squorx nipples naturally align perfectly with your chosen spokes, increasing stiffness and durability with no weight penalty over traditional eyeleted rims,Unique process for the black coating produces a tough and durable finish,Weight limit: 150 KG,ERD 563 mm (27.5 inch) or 601 mm (29 inch), Weight 610 grams (27.5 inch),Outer width 40 mm Inner width 35 mm.
The most refined, lightweight trail wheels on the market, featuring DT's highly evolved Ratchet EXP system, the XMC's are our most versatile carbon MTB wheel, as happy on a back country epic as they are between the tapes. Added shoulder material gives the XMC's enhanced impact protection and a higher weight limit over the XRC's but weights still stand at a super low 1,435 grams a pair in 27.5 inch and 1,529 grams in 29 inch.Key Features:100% bespoke hookless rim design with continuous strand lay-up, designed by DT, made by DT and tested to destruction by DT at their test lab in Biel, Switzerland, no open moulds here,The 180 hubs feature SiNC ceramic bearings and DT's cutting edge, Ratchet EXP system, an evolution of the original twin HÜgi ratchet, the ratchet EXP integrates the inner ratchet into the hub, allowing wider bearing spacing, fewer moving parts and more precise alignment,The resulting hubs are even more durable and reliable than our classic ratchet 240's but stiffer and significantly lighter with the fast rolling benefits of Ceramic bearings,A blend of DT's premium straight pull Aero Comp and Aerolite spokes offers an optimum blend of stiffness, comfort and low weight,Rear wheels include both Shimano MICRO SPLINE and SRAM XD freewheels for easy conversion,When bought as a pair they will include wheels bags, 6-bolt rotor adaptors, spoke tools, tubeless rim tape and tubeless valves,Maximum recommended system weight: 120 KG.
The most refined, lightweight trail wheels on the market, featuring DT's highly evolved Ratchet EXP system, the XMC's are our most versatile carbon MTB wheel, as happy on a back country epic as they are between the tapes. Added shoulder material gives the XMC's enhanced impact protection and a higher weight limit over the XRC's but weights still stand at a super low 1,435 grams a pair in 27.5 inch and 1,529 grams in 29 inch.Key Features:100% bespoke hookless rim design with continuous strand lay-up, designed by DT, made by DT and tested to destruction by DT at their test lab in Biel, Switzerland, no open moulds here,The 180 hubs feature SiNC ceramic bearings and DT's cutting edge, Ratchet EXP system, an evolution of the original twin HÜgi ratchet, the ratchet EXP integrates the inner ratchet into the hub, allowing wider bearing spacing, fewer moving parts and more precise alignment,The resulting hubs are even more durable and reliable than our classic ratchet 240's but stiffer and significantly lighter with the fast rolling benefits of Ceramic bearings,A blend of DT's premium straight pull Aero Comp and Aerolite spokes offers an optimum blend of stiffness, comfort and low weight,Rear wheels include both Shimano MICRO SPLINE and SRAM XD freewheels for easy conversion,When bought as a pair they will include wheels bags, 6-bolt rotor adaptors, spoke tools, tubeless rim tape and tubeless valves,Maximum recommended system weight: 120 KG.
Key Features: Lightweight alloy tubeless valve, for 18-25 mm deep asymmetric road or MTB rims,Conical seal works with almost all rims, but is of course optimised for DT Swiss,Offset adaptor allows a clean install with asymmetrical rims that other valves can struggle with.,Wide bore for easy insertion of sealant and high air flow for initial inflation,Aerodynamic and easy to turn dust cap with integrated valve core extractor, please install valve with dust cap in place to ensure correct alignment.
The Ratchet LN upgrade kit enables the conversion of DT Swiss 3-pawl hubs to the renowned DT Ratchet freehub systemPawl freehub systems create relatively small engagement surfaces, which result in higher stress on the contact area. The Ratchet System is extremely reliable due to the simultaneous engagement of the ratchet faces, distributing the force evenly over a large area,In addition, the Ratchet System is modular, so the engagement angle can be increased by replacing the included 18 tooth ratchets with 36 or 54 tooth units (sold separately),DT are the original ratchet hub innovators, with over 25 years of development and refinement behind it no other manufacturer has matched DT's system for ease of service, reliability and durability,Tool-free servicing concept make maintenance quick and simple, even mid-ride in a pinch,LN system is specific to 370 hubs such as those found on 1900 series DT complete wheels, the freehubs are not compatible with standard Ratchet or Ratchet EXP hubs,Requires both a HBDT835 Ratchet ring nut tool and an HBDT5266 Pawl ringnut tool to install, DT recommends that this work is carried out by a qualified mechanic.
When you head into the unknown, whether on a 29er or a 27.5er, the HX 531 with its 30 mm internal width is the perfect choice. With an ideal position in the middle of the strength, to weight, to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain.Key Features:E-MTB's are a whole ton of fun but there's no denying that they are extremely hard on components, especially wheels,It's not just the extra mass; the huge, sustained torque an E-bike and rider can produce means standard wheels simply don't last,This is where DT's Mission Hybrid comes in, a whole line of wheels and components specifically designed to go the distance under regular E-MTB usage,For the Hybrid rims the key difference is a thicker, reinforced spoke bed, increasing Pull-through force by 20% at a key failure point for E-MTBs and greatly extending fatigue life for minimal weight gain,The tubeless ready optimized rim bed provides fast tire installation, a great tire fit, and quick trouble-free tubeless setup,The DT Swiss welding process leaves an extremely consistent and strong weld joint,The included PHR washers and convex Squorx nipples naturally align perfectly with your chosen spokes, increasing stiffness and durability with no weight penalty over traditional eyeleted rims,Unique process for the black coating produces a tough and durable finish,Weight limit: 150 KG,ERD 563 mm (27.5 inch) or 601 mm (29 inch), Weight 555 grams (27.5 inch) or 590 grams (29 inch),Outer width 35 mm Inner width 30 mm.
Genuine DT Swiss replacement Freehub bodyOnly fits classic twin-sprung DT ratchets, will not fit the Ratchet EXP hubsDoes not include end cap; if you require an end cap please order the equivalent conversion kit
Key Features: WTB i25 KOM Light rims, TCS 2.0 creates a more robust, easily installed and dependable tubeless system. A recessed channel along the centre of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim, 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area., Industry Nine 101 front hub 32h, Long lasting Enduro bearings throughout, Made in Ashville USA from 70705 T6 Aluminium, Wheel weight 814g.
Key Features:XLC Pro fix axle QR-H01,aluminum 7075,incl. Carbon lever,approx. 71g (150mm).