It's a dirty job but Fendor Bendor Big gets the job done! Maximum protection for gravel or MTB. Key Features: Easy to mount, no tools required ,Perfect for Gravel or MTB,Super lightweight, only 61 grams,Longlasting, durable materials,Suitable for tire widths between 32-55 mm,.FENDOR BENDOR Big is ideal for bikepacking. Strong enough to handle really muddy conditions but flexible enough to not break while being bashed around. The width is optimized for tire sizes commonly used by gravel cyclists. Mounted close to the rear tire it will protect your saddle bag as well as the rider from road muck and water. It attaches to virtually any bike in seconds, without the use of tools.Most bikepacking gear is not 100% waterproof and a good set of fenders can save you from the misery of having a wet sleeping bag or clothes at the end of the day. Even if your gear is fully waterproof, you will appreciate the lack of mud on your bags when you stop to get a jacket out or when you bring them into the tent after a rough day in the saddle. The full kit adds less than 85 grams to your total weight, making it ideal for ultralight bikepacking. Specification: Measures: 555x80 mm (effective), Weight: 61 g , Material: 1 mm PP (Polypropylene),. Fit: The Fendor Bendor fits all frames with standard seat stays. It's self supportive and doesn't require support from the brake bridge or the seat stays. It can also be mounted directly on a seat post (as low as possible for best effect). The Fendor Bendor will not fit if you have monostay frame or center pull brake. Prefold: The scoring lines along the fender need to be folded hard in order to give the it the necessary rigidity and strength. Take extra care to fold down the outer edges to make sure your Fendor Bendor is functioning properly. Frame Protection: Each Fendor Bendor is delivered with a small set of transparent 3M polyurethane protection stickers. Use these to prootect your seat stays from scratches from the fender. Storage: The Fendor Bendor Big can be folded in half for easy storage in a backpack or strapped on your bikepacking gear.
The Mudder Mini offers minimal interference while protecting what is important. The Detour edition of Mudder Mini has also been given an upgraded material thickness for sturdiness. Key Features: Protecting face and headset bearings, Mounts easy and securely with antislip straps , Fits all stiff cross/gravel forks, Super lightweight, only 21 grams, Keeps spray from you handlebar bags,.The Mudder Mini offers minimal interference while protecting what is important. Not only is your headset and face protected but it will also do a very good job of keeping your handlebar bag clean and dry. The Detour edition of Mudder Mini has also been given an upgraded material thickness for sturdiness.Most bikepacking gear is not 100% waterproof and a good set of fenders can save you from the misery of having a wet sleeping bag or clothes at the end of the day. Even if your gear is fully waterproof, you will appreciate the lack of mud on your bags when you stop to get a jacket out or when you bring them into the tent after a rough day in the saddle. The full kit adds less than 85 grams to your total weight, making it ideal for ultralight bikepacking. Specification: Measures: 90 x170 mm (effective), Weight: 21 g , Material: 0.8 mm PP (Polypropylene),. Fit: The MUDDER Mini will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar. Purpose: This mudguard is specifically designed to block dirt from being thrown forward and potentially impair your vision during high speed riding and the wellness of your lower headset bearings. It will not protect you from general spray coming from your front tire or your feett and lower legs. Adjustable anti-slip 2-in-1 hook and loop straps: The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance. Pre-folding: The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
The all new FENDOR BENDOR Regular is a great option for those truly wet moments when you wish you had a fully protecting mudguard. It attaches with no tools, to virtually every bike in just a few seconds. Still foldable, it can easily be stored in a bag or jersey pocket for wet weather deployment.Universal fitWith the newly developed attachment construction, FENDOR BENDOR Regular is now completely self supported and therefore possible to mount on bikes without the sideway support of the seat stays or the support of a brake bridge. You could also mount it above your caliper brake to avoid interference with the brake.For streets and roadsThe FENDOR BENDOR Regular has been adapted to fit the smaller and more delicate tubing of road and urban bikes. It has a slightly slimmer profile than its predecessor that will look at home on everything from your vintage track bike to your hyper modern carbon road bike. It remains folded in two places to keep the compact folded state of the previous generation that easily slips into a jersey pocket or backpack.Easy to mount, no tools required ,Fits almost all bikes,Super lightweight, only 50 grams,Longlasting, durable materials,Made in Sweden,.Key Features:Technical data,Measures: 540x65 mm (effective),Weight: 50 g ,Material: 1 mm PP (Polypropylene),.Fit The Fendor Bendor fits all frames with standard seat stays. It's self supportive and doesn't require support from the brake bridge or the seat stays. It can also be mounted directly on a seat post (as low as possible for best effect). The Fendor Bendor will not fit if you have monostay frame or center pull brake.Prefold The scoring lines along the fender need to be folded hard in order to give the it the necessary rigidity and strength. Take extra care to fold down the outer edges to make sure your Fendor Bendor is functioning properly.Frame protection Each Fendor Bendor is delivered with a small set of transparent 3M polyurethane protection stickers. Use these to protect your seat stays from scratches from the fender.Storage The Fendor Bendor can always be folded back into a small package for storage in a bag or jersey pocket.
Wether you commute to work or race in the UCI World tour, the Ass Saver Regular will keep your butt dry and dramatically increase the comfort on cold and wet rides. The latest Ass Saver sports the new FLIP-TIP™ attachment system. Once fitted, simply fold up the tip of the Ass Saver and it will securely lock to the saddle rails.Have no doubt, The fourth generation of Ass Savers is your new best friend. Easy to hook up with, never being a burden and always there to cover your back, no matter what.Keeps your butt dry on wet roads,New patented FLIP-TIP™ attachment system,Easy to mount, requires no tools,Fits every standard rail saddle, also with carbon rails.,Suitable for tire widths between 23-35 mm,.Key Features:Technical data,Measures: 380x102 mm ,Weight: 19 g,Material: 0.8 mm PP (Polypropylene),.Front rail attachment Since 2014 all Ass Savers attach to the front saddle rails only, ahead of the seat post attachment. The advantage with this solution is that saddles are more uniform in this area and we can therefore provide a proper fit to a much wider range of saddles. Attaching only to the front rails makes the Ass Saver self centering. If you accidentally kick it without noticing, it will strive to regain it's centered position. This is one of the key innovations in saddle mudguard technology and is therefore protected under a pending patent No. SE PRV 1750201-4FLIP-TIP™ Using origami principles, the patent pending FLIP-TIP™ technology allows you to securely fasten the Ass Saver to the saddle with a simple flip of the tip, just like a cycling cap. To unlock, just flip the tip back down and pull backwards. Carbon rails The FLIP-TIP® technology is fully compatible with all types of carbon saddle rails.Saddle bag compability The new Ass Saver is a lot easier to install with a saddle bag than previous models. While we can't guarantee a perfect fit with all saddle bags, great improvements hav been made with considerably less interference as a result.Pre-folding The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.
Designed especially for wide tires, the Ass Savers Big is here to protect you from mud and dirt all day long. Use it with your MTB, gravel bike or your daily commuter, it doesn't care!The new FLIP-TIP™ lock mechanism will ensure that your Ass Saver Big will stay put no matter how rough roads you ride. Totally redesigned, it's stronger, longer and more colourful than ever before. Have no doubt, the fourth generation of Ass Savers is your new best friend. Easy to hook up with, never being a burden and always there to cover your back, no matter what.Easy to mount, requires no tools,New patented FLIP-TIP™ attachment system,Fits every standard rail saddle, also with carbon rails,Suitable for tire widths between 30-50 mm,Great for gravel,.Key Features:Measures: 383x115.5 mm,Weight: 25.5 g,Material: 0.8 mm PP (Polypropylene) ,.Front rail attachment Since 2014 all Ass Savers attach to the front saddle rails only, ahead of the seat post attachment. The advantage with this solution is that saddles are more uniform in this area and we can therefore provide a proper fit to a much wider range of saddles. Attaching only to the front rails makes the Ass Saver self centering. If you accidentally kick it without noticing, it will strive to regain it's centered position. This is one of the key innovations in saddle mudguard technology and is therefore protected under a pending patent No. SE PRV 1750201-4FLIP-TIP™ Using origami principles, the patent pending FLIP-TIP™ technology allows you to securely fasten the Ass Saver to the saddle with a simple flip of the tip, just like a cycling cap. To unlock, just flip the tip back down and pull backwards. Carbon rails The FLIP-TIP® technology is fully compatible with all types of carbon saddle rails.Saddle bag compability The new Ass Saver is a lot easier to install with a saddle bag than previous models. While we can't guarantee a perfect fit with all saddle bags, great improvements hav been made with considerably less interference as a result.Pre-folding The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions/see the instruction video to ensure the best performance.
The purpose of the MUDDER is to keep your eyes muck-free as you go full speed down that dirtbag of a trail that you love so much. Chances are, that thanks to MUDDER, you're also not having flying mud for lunch. Key Features: Deflectors increase efficiency, Easy to mount with included zipties , Fits all suspension forks with a fork bridge, Super lightweight, only 18 grams, Suitable for all wheel sizes,.The purpose of the MUDDER Regular is to keep your eyes muck-free as you go full speed down that dirtbag of a trail that you love so much. Chances are, that thanks to MUDDER, you’re also not having flying mud for lunch.In true Ass Savers spirit, we’ve taken the minimalist approach with some added clever thinking. The result is a fork mounted front mudguard with an unobtrusive design and unsurpassed efficiency when it comes to keeping your face free from dirt. The design features innovative tire-hugging deflectors that can be adjusted so virtually no mud will pass. Specification: Measures: 237 x 154 mm, Weight: 18 g , Material: 0.8 mm PP (Polypropylene),. Fit: The MUDDER will fit all standard front suspension forks with wheel sizes between 26" to 29". If you have a fork with an inverted fork bridge, like DT Swiss or Magura, then it won't fit without modifications. Purpose: This mudguard is specifically designed to block dirt from being thrown forward and potentially impair your vision during high speed trail riding. It will not protect you from general spray coming from your front tire. No-Mud-Shall-Pass flaps : The flaps at the front of the MUDDER is designed to be folded down towards the tire for even better protection. Depending on your tire clearance they may be folded very little or very much. Pre-folding: The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, sprinng loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
The front mudguard that will keep your feet happy! Mounts in seconds on basically any bike, regardless of frame size or cables. The long downward reach make sure it's busy were it really counts. Universal fitThe attachment of the SPEED MULLET is done in seconds with a single 2-in-1 velcro strap. Big fat carbon frame or thin steel frame doesn't matter. The design of the folds makes sure that correct angle is achieved every time on every bike. Cable managementWhat puts the SPEED MULLET above the rest is the cable routing feature. Utilizing two shallow channels to let the cables pass between the frame and mudguard, it's compatible with the majority of existing cable combinations.Use it anywhereWether you are dodging traffic in a wet downtown rush hour or grinding the endless gravel in the rain, the SPEED MULLET is your new haircut.Keeps your feet dry on wet roads,Universal fit for all bike types,Cable routing friendly,Mounts in seconds, without tools,Suitable for 23-42 mm tires,.Key Features:Technical data,Measures: 390x113 mm ,Weight: 30 g ,Material: 0.8 mm PP (Polypropylene),.Stabilizer tabsThe attachment features two tabs that folds in underneath the velcro strap. They provide stability so that the SPEED MULLET holds it's position even under rough conditions. They also make sure that the right angle is achieved, regardless if you have a thin steel frame or a fat carbon frame.Cable ManagementThanks to three silicone bumpers and the specific routing of the strap, two channels are formed between the frame and the mudguard. This enable the SPEED MULLET to work flawlessly with downtube mounted cables. If your cables are without cable housing they will run freely in the channels without scratching your frame and with no impact on your shifting. EXCEPTION! For safety reasons the SPEED MULLET should not be used in connection with uncovered cables for the rear brake. This is not very common but if your bike has mechanical disc brakes, please make sure your downtube brake cable has housing before using SPEED MULLET.Mounting positionTo give your feet the best protection, make sure to fold the outer edges of the SPEED MULLET at almost 90 degrees so that they are facing forward and place the mudguard as close to the wheel as possible while still maintaining clearance for steering. If you are looking for maximum drivetrain protection, fold the outer edges just slightly and place the SPEED MULLET further down, closer to the chainring. Important checkJust for safety, please check for steering clearance and brake function before each ride.
Mudguard for further Brompton customisation. Use existing stays and attachments or purchase separately.
Brooks England Scape Frame Frame Bag Practical, functional and ensures a long-lasting performance, the Scape Frame Bag from Brooks England provides secure and convenient frame storage and is suited to any two-wheeled adventure. With a waterproof construction, adjustable attachments, a reliable and easy to pull zipper while being compatible with virtually any frame design, this bag is ideal for bikepacking, gravel riding, long day epics and adventure cycling. And, it has internal compartments, two full-length zips and Hypalon Velcro straps for easy attachment.Durable, Waterproof and VersatileAble to fit most standard-sized frames, the Scape Frame Bag is a 100% waterproof, cycling half frame bag suitable for bikepacking, gravel and other all-day adventure cycling pursuits. An entirely welded construction ensures the pack is completely waterproof and holds its streamlined shape while in position on the bike. Plus, it's great for storing longer items such as a pump or tent poles via its two full length zips with an ergonomic zipper puller for fast and easy access. The main compartment comes equipped with internal organisation and a cable hole, while the corresponding waterproof zip on the opposite side, utilising the innovative KCC zip, is designed for small items.Ideal for: Gravel Bikepacking Adventure Rides Touring CommutingFeatures: Capacity: 3 L Dimensions: W 460 x H 120 x D 60 mm Max Load: 3 kg Lateral reflective logo Two lateral pockets: One pocket with coated YKK zip with protection flap, big compartment with internal organiser and cable exit One KCC waterproof zip for small accessories Easy pull zipper Hypalon Velcro straps for easy attachment Frontal TPU cable hole Waterproof Weight: 200 gBuy Brooks England Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brooks England Scape Handlebar Pouch Ideal for straight and drop handlebars, the Scape Handlebar Pouch from Brooks England is a small and reliable handlebar storage solution that's useful for any ride. It provides fully weatherproofed storage for your journey essentials, while its adjustable attachments and easy-pull zipper ensure quick access to your cargo wherever your adventure takes you.Waterproof, Compact and Reliable Handlebar StorageThe Scape Handlebar Pouch is a welded, fully waterproof small handlebar bag for stowing much-needed items in safety. This handlebar bag is equally at home as a bag for long-distance touring or commuting, easily fitting to most bike handlebars and furthermore finished with easy pull zippers. Two straps with aluminium buckles make mounting easy and reliable with a head tube strap to prevent the bag from swaying. It may also be attached to other Scape Bags as an extra pocket, for example above the Scape Handlebar roll. Practical, reliable and compact, this bag is useful for any ride and fully waterproof thanks to its welded materials and all-round weatherproof details for securely stowing much-needed items. Ideal for: Gravel Bikepacking Adventure Rides Touring CommutingFeatures: Capacity: 3 L Dimensions: W 250 x H 120 x D 120 mm Max Load: 3 kg Front reflective logo Coated YKK zip with protection flap Aluminium buckles to attach bag to handlebar Central rear webbing to attach to head tube Rigid internal lateral foam to keep the shape Nylon webbing Lateral Hypalon hook for shoulder strap or extra bag attachment Frontal Daisy Chain for light Waterproof Weight: 140gBuy Brooks England Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brooks England Scape Handlebar Roll BagEngineered for epic adventures, where reliability and functionality are key, the Scape Handlebar Roll from Brooks England is versatile, dependable and fully weatherproof. It features a main holster to securely hold your journey cargo and a fully waterproof IPX4 drybag. This handlebar roll bag is the ultimate in secure and convenient storage for epic adventures, bikepacking journeys and long-distance trekking rides.Weatherproof, Lightweight and Dependable Handlebar StorageBuilt for adventure, the Scape Handlebar Roll is a bikepacking bag made from two separate elements: a holster and a 100% waterproof (IPX4 certified) removable drybag featuring two internal compartments made from lightweight, waterproof materials and all-round weatherproof details. Ideal for Touring, Bikepacking and All Mountain AdventuresSpecially designed for long-distance touring and bikepacking races and easily attaching to both drop (road and gravel type) and straight (MTB) handlebars, the holster attaches via two straps with aluminium buckles to make mounting quick and reliable, with EVA spacers to allow easy passage of cables and a fuller grip. A double daisy chain runs through the holster to hold bulkier items. Ideal for: Gravel Bikepacking Adventure Rides TouringFeatures: Capacity: 10-12 L Dimensions: W 350-400 mm x H 160 x D 160 mm Dry Bag Dimensions: 740 x 280 mm Max Load: 5 kg Holster: Front reflective logo 3 EVA Foam spacers (2x2cm, 1x1cm) each side Aluminium buckle and hook Hypalon Velcro strap Daisy Chain nylon webbing Dry Bag: 420D Nylon fully welded Waterproof IPX4 Two-sided roll closure Double opening with internal compartment Weight: 670 gBuy Brooks England Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.