This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
LifeLine Pro Bottom Bracket 30 Removal ToolLifeLine offer a comprehesive range of bicycle tools with quality built-in and at great value prices. Whatever job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.LifeLine Pro BB 30 Removal ToolThe perfect tool for those who want to remove a BB30 bottom bracket from a frame.Features: Collet system ensures ease of use and snug engagement with Bearing Made from Hardened Steel for DurabilityBuy LifeLine Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
The inner ring nut removal tool allows you to service your ratchet-style hubs like the DT Swiss 240s, 350 and Prime SR1 hubs. Usually, ratchet hub tools require you to put the tool into a vice and then spin the wheel to loosen but not everyone has a vice, so LifeLine has also added a 24mm Hex which allows you to use a 24mm socket to remove. Not compatible with DT Swiss EXP Ratchet hubs or Pawl drive hubs.
Tool for removing axle on older and current Look road pedals.
Side Visibility Moon’s Orion comes with an ultra-bright red LED with a specially adapted lens and integrated reflectors that spread the light and create excellent levels of side visibility. The light helps you stay seen from behind and to your sides which is important when traversing multiple lanes of traffic. Light Modes The light comes with five different light modes which can easily be toggled between by holding down on the power button. The light modes allow you to find the best lighting for your current environment and depleting battery life. Mode One: 10 lumens – 5.30 hours Mode Two: 20 lumens – 2.30 hours Flash One: 10 lumens – 53 hours Flash Two: 20 lumens – 26 hours Day Flash: 50 lumens – 30 hours USB Rechargeable The integrated 300mAh lithium-polymer battery is USB rechargeable using the integrated Micro-USB charging cable which lets you charge the light via any standard USB port. The light fully recharges in just 2 hours and holds up to 53 hours of battery life. A battery light indicator also lets you know when your battery is low, charging, and fully charged. Durable Design The housing unit has been ruggedly designed to withstand all that your commute has to throw at it. The construction protects against impacts and abrasions with an IPX5 water and dust resistant rating. Mounting Included in the pack is a magnetic mount and 2 o-rings that provide a secure attachment to your various seat post types aero and standard bars. The magnetic mount also lets you connect the light to clothing, helmets, panniers and more. In the Box Orion rear light Magnetic mounting 2 o-rings for mounting USB-Micro charging cable
MRP Wave Boost Oval Chainring SRAMThis high-quality mountain bike (MTB) chainring features standard teeth with an Oval chainring shape, which allows you to benefit from increased power with less effort. This makes it ideal for all-day epics on your favourite mountain routes and beyond. Another highlight is its Boost 52mm chainline and SRAM direct mount design, which makes it simple to integrate into your existing setup. Made in the USA, this is an excellent choice of upgrade for dependable chain retention and performance as you hit the trails.The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP's Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles' Heels” of narrow/wide designs.Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium.Wave Chainring Technology AdvancementsThe MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability.- Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth.- Alternating lateral force to each chain link to actively retain links to the ring.- Less surface contact between chainring and chain creating minimal friction and maximum retention.- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.- Tooth design allows for reduced weight chainrings over competitor technology.Features: Material: CNC-machined 7075 Aluminium Use: Mountain Bike (MTB) Mount Type: SRAM Direct Mount Teeth Type: Standard teeth Chainring Shape: Oval Chainline: 52mm (Boost) with GXP and DUB cranksets Compatibility: Shimano 9/10/11 speed and SRAM 9/10/11/12 speed compatible (not compatible with 12 speed) Number of Chainrings: Single Designed for x1 drivetrains Not reversibleManufacturer's Part Number: MR-23-1-231 Black 30T SRAM MR-23-1-232 Black 32T SRAMBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Wave Boost Oval Chainring SRAMThis high-quality mountain bike (MTB) chainring features standard teeth with an Oval chainring shape, which allows you to benefit from increased power with less effort. This makes it ideal for all-day epics on your favourite mountain routes and beyond. Another highlight is its Boost 52mm chainline and SRAM direct mount design, which makes it simple to integrate into your existing setup. Made in the USA, this is an excellent choice of upgrade for dependable chain retention and performance as you hit the trails.The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP's Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles' Heels” of narrow/wide designs.Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium.Wave Chainring Technology AdvancementsThe MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability.- Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth.- Alternating lateral force to each chain link to actively retain links to the ring.- Less surface contact between chainring and chain creating minimal friction and maximum retention.- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.- Tooth design allows for reduced weight chainrings over competitor technology.Features: Material: CNC-machined 7075 Aluminium Use: Mountain Bike (MTB) Mount Type: SRAM Direct Mount Teeth Type: Standard teeth Chainring Shape: Oval Chainline: 52mm (Boost) with GXP and DUB cranksets Compatibility: Shimano 9/10/11 speed and SRAM 9/10/11/12 speed compatible (not compatible with 12 speed) Number of Chainrings: Single Designed for x1 drivetrains Not reversibleManufacturer's Part Number: MR-23-1-231 Black 30T SRAM MR-23-1-232 Black 32T SRAMBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Wave Cinch Oval Boost Chainring Race FaceThis high-quality mountain bike (MTB) chainring features standard teeth with an Oval chainring shape, which allows you to benefit from increased power with less effort. This makes it ideal for all-day epics on your favourite mountain routes and beyond. Another highlight is its Boost chainline and Race Face CINCH Direct Mount design, which makes it simple to integrate into your existing setup. Made in the USA, this is an excellent choice of upgrade for dependable chain retention and performance as you hit the trails.The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP's Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles' Heels” of narrow/wide designs.Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium.Wave Chainring Technology AdvancementsThe MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability.- Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth.- Alternating lateral force to each chain link to actively retain links to the ring.- Less surface contact between chainring and chain creating minimal friction and maximum retention.- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.- Tooth design allows for reduced weight chainrings over competitor technology.Features: Material: CNC-machined 7075 Aluminium Use: Mountain Bike (MTB) Mount Type: Race Face CINCH Direct Mount Teeth Type: Standard teeth Chainring Shape: Oval Chainline (Boost): 52mm with RXC and RF134 spindles, 53mm with RF134 spindle Compatibility: SRAM 9/10/11/12 speed compatible (not compatible with 12 speed) Number of Chainrings: Single Designed for x1 drivetrains Not reversibleManufacturer's Part Number: MR-23-1-251 Black 30T RaceFaceBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Wave Cinch Oval Chainring Race FaceThis high-quality mountain bike (MTB) chainring features standard teeth with an Oval chainring shape, which allows you to benefit from increased power with less effort. This makes it ideal for all-day epics on your favourite mountain routes and beyond. Another highlight is its 49mm chainline and Race Face CINCH Direct Mount design, which makes it simple to integrate into your existing setup. Made in the USA, this is an excellent choice of upgrade for dependable chain retention and performance as you hit the trails.The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP's Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles' Heels” of narrow/wide designs.Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium.Wave Chainring Technology AdvancementsThe MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability.- Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth.- Alternating lateral force to each chain link to actively retain links to the ring.- Less surface contact between chainring and chain creating minimal friction and maximum retention.- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.- Tooth design allows for reduced weight chainrings over competitor technology.Features: Material: CNC-machined 7075 Aluminium Use: Mountain Bike (MTB) Mount Type: Race Face CINCH Direct Mount Teeth Type: Standard teeth Chainring Shape: Oval Chainline: 49mm with RXC and RF134 spindles, 50mm with RF134 spindle Compatibility: Shimano 9/10/11 speed and SRAM 9/10/11/12 speed compatible (not compatible with 12 speed) Number of Chainrings: Single Designed for x1 drivetrains Not reversibleManufacturer's Part Numbers: MR-23-1-241 Black 30T RaceFace MR-23-1-242 Black 32T RaceFaceBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Wave Cinch Oval Chainring Race FaceThis high-quality mountain bike (MTB) chainring features standard teeth with an Oval chainring shape, which allows you to benefit from increased power with less effort. This makes it ideal for all-day epics on your favourite mountain routes and beyond. Another highlight is its 49mm chainline and Race Face CINCH Direct Mount design, which makes it simple to integrate into your existing setup. Made in the USA, this is an excellent choice of upgrade for dependable chain retention and performance as you hit the trails.The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP's Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles' Heels” of narrow/wide designs.Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium.Wave Chainring Technology AdvancementsThe MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability.- Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth.- Alternating lateral force to each chain link to actively retain links to the ring.- Less surface contact between chainring and chain creating minimal friction and maximum retention.- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.- Tooth design allows for reduced weight chainrings over competitor technology.Features: Material: CNC-machined 7075 Aluminium Use: Mountain Bike (MTB) Mount Type: Race Face CINCH Direct Mount Teeth Type: Standard teeth Chainring Shape: Oval Chainline: 49mm with RXC and RF134 spindles, 50mm with RF134 spindle Compatibility: Shimano 9/10/11 speed and SRAM 9/10/11/12 speed compatible (not compatible with 12 speed) Number of Chainrings: Single Designed for x1 drivetrains Not reversibleManufacturer's Part Numbers: MR-23-1-241 Black 30T RaceFace MR-23-1-242 Black 32T RaceFaceBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.