A dependable workstand for the home mechanic with a deluxe clampWorking height of clamp adjusts from 53 to 67 inches (34 to 170 cm)Infinite 360 degree rotation of clamp head for perfect positioningTapered rotational locking systemFolds flat for easy storageConstructed of powder coated steel tubing for durabilityRubber feet are adjustable for uneven floors
Features:Base for Park Tool PRS-33 power lift stand.The height and heft of the PRS-33 requires a whole different level of base support and this forged slab will keep you stable during even the most vigorous wrenching.Drilled specifically for the PRS-33 the 135-33 features threaded height adjusters at each corner for perfect stability on uneven surfaces.Made in a the USA with Park's usual lifetime warranty, if you break this we'll want to know how! .
The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adaptor to ensure correct alignment1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facerBores a machined surface to a depth of approximately 25mm and then faces the end of the headtubeSHIS terminology: The 758.2 is for EC49 upper and lower headtubesUse with generous quantities of Park CF2 cutting fluid for best results and prolonged tool life
We started from the ground up to create what we believe is the finest folding stand available. Lightweight stable and packed with features100-25D Professional Micro Adjust Clamp quickly clamps and releases nearly any tube from 7/8 inches to 3 inches (23-76 mm) including aero tubesFully adjustable clamping pressureNarrow clamping jaws (2.7 inches / 7 cm) fit into tight areas or on short seat posts360 degree clamp rotationSoft durable composite rubberclamping padsSaddle cradle provides a perfect spot to temporarily rest a bike by its saddleThree-point leg system creates a stable base on smooth or rough surfacesQuickly and easily folds to 47 inchesClamping height adjusts up to 60 inchesProprietary Hexatude hex-shaped aluminium tubing ensures low flex and no rotationAluminium leg straps ensure all parts slide fold and unfold togetherWeighs just 13 pounds (6 kg)
The Rim Nakamura signature Wings complete is a bike that can go straight from the box to shredding the park and is stacked with high quality parts from Subrosa, Shadow and Rant. And with Rim’s stamp of approval you know it can handle the abuse. ###section### Product Specs FRAME MATERIAL: 1021 Hi Ten Steel WHEEL SIZE: 20" TOP TUBE LENGTH: 20.2" CHAIN STAY LENGTH: 12.7" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: Chromoly steer tube - 30mm offset BARS: 1020 Hi Ten 2pc - 9" STEM: Rant Trill Front Load 48mm HEADSET: Rant Bang Ur Intergrated BRAKE MOUNTS: Welded BRAKES: Rant Spring Brakes V2 with Rant Gravitron Detangler FRONT HUB: 3/8" Loose Alloy FRONT RIM: Rant Squad 36H Alloy Single Wall REAR HUB: 14 mm Sealed Cassette REAR RIM: Rant Squad 36H Alloy Single Wall TYRES: Shadow Serpent 2.30" LP SPROCKET: Subrosa Petal Steel CRANKS: Chromoly 8 Spline 3pc 170mm BB: Sealed Mid PEDALS: Rant Trill Plastic SEAT: Subrosa Slim 1pc Combo GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Full Size Bike with a Shorter Top Tube and geometry to Suit riders who are 4ft - 5ft 4" / 120cm -160cm Best suited to skatepark use but can be used on for all types of Riding Strong Hi-Ten steel construction Fitted with high-quality aftermarket parts Sealed rear hub ###shogun-image-section###
The Primer is a serious starter bike at a seriously great price. With a park specific geometry and an Odyssey Gyro that is connected to a pro-level Odyssey M2 Trigger lever and pre-cut dual lower cables for better braking and easier maintenance. Built around a pro-level geometry in a range of top tube sizes, the Primer is spec’d with quality parts like Odyssey Springfield brakes and Path Pro tyres. The 2021 Primer also includes a fully sealed rear cassette hub and proven parts like the Sunday Freeze Stem and an FSA Headset. ###section### Product Specs FRAME MATERIAL: Hi-Ten WHEEL SIZE: 20" TOP TUBE LENGTH: 20.5" CHAIN STAY LENGTH: 12.7-13” HEADTUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° FORKS: Sunday Primer, 20" fork w/ 2-piece steerer tube and welded pre-load BARS: Sunday, 2-piece 9" STEM: Sunday Freeze top load, 48mm HEADSET: FSA integrated, 1-1/8" BRAKE MOUNTS: Welded BRAKES: Odyssey Springfield U-brake FRONT HUB: Sunday, 36H, low-flange, loose-ball, 3/8" axle FRONT RIM: P-7X aluminum, 20", 36H REAR HUB: Sunday, 36H, sealed, 14mm axle w/ 9T Driver REAR RIM: P-7X aluminum, 20", 36H TYRES: Odyssey Path Pro OEM, 20 x 2.4" SPROCKET: Sunday Sabertooth v2, 25T, steel CRANKS: 160mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Wellgo platform, plastic SEAT: Sunday Badge, seat and post combo GEARING: 25/9 WEIGHT: 25.8lbs (with brakes) ###section### Product Highlights Great for riders who are between 5ft and 6ft tall (150cm - 180cm) Best suited to skatepark use but can be used on for all types of Riding Gyro brakes allow the handlebars to turn a complete 360 Sealed rear hub Strong and durable crankset ###shogun-image-section###
Park Tool Team Issue Repair Workstand PRS-22.2The PRS 22.2 Team Issue Repair Stand from Park Tool has been updated with a super-smooth and solid rotation system! It was designed originally for professional Pro Tour mechanics, to mount bikes for maintenance without clamping the frame, the bike is held in place by supporting the bottom bracket then locking either the front or rear dropouts. This stand functions perfectly with any modern axle standard, including Quick Release and every size of Thru-Axle without the need for adaptors. It is perfect for general cleaning and repair work, and it features a sturdy and solid tripod base, which folds compactly for storage; this stand is the mechanics ultimate partner.Features:Material: 6063 T6 lightweight Aluminium Adjustable BB Height: 76cm to 114cm Horizontal Rotation: 360° Main Beam Adjustment: Fore & Aft for optimised balance points Easily transported in the BAG-20 (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Oversized Pulley Wheel System for Shimano Dura-Ace 9200 and Ultegra 8100 with integrated stop tower for simple installation and durability. This OSPW System has handbuilt CeramicSpeed Bearings installed in each pulley and comes with a 4-year warranty as standard and a lifetime warranty when choosing coated bearings. Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimisation of the rear derailleur. The upper and lower oversized aluminium pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. For 8100 derailleurs, the cage uses the factory derailleur body washer. 9200 derailleurs will require the new included derailleur body washer. The CeramicSpeed Oversized Pulley Wheels System has been proven to be the fastest pulley system in the world. With an industry-leading design, the CeramicSpeed OSPW System is the choice of World Champions and top athletes around the world. Since its introduction in 2015, the CeramicSpeed Oversized Pulley Wheel System has been through 13 unique derailleur compatibility developments. No other pulley system has the depth of use and trust as the CeramicSpeed OSPW, which counts both Men’s and Women’s Triathlon World Champions, World Tour professional road teams, XCO professional MTB Teams, and elite athletes worldwide as its users. This OSPW System has handbuilt CeramicSpeed Bearings installed in each pulley and it comes with a four-year manufacturer's warranty as standard. Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimisation of the rear derailleur. The upper and lower oversized aluminium pulley wheels come fitted with standard CeramicSpeed Bearings. Also included in the box is a 15ml dropper bottle of CeramicSpeed Bearing Oil. Technical Data The overall power savings of the OSPW System for Shimano 9200 reach 30%-60%, or more in some cases, over a stock setup. The oversized pulley wheels have 3-5 times longer lifetime than the commonly used standard pulleys on the market. Maintenance of CeramicSpeed OSPW Systems Regarding the maintenance of your OSPW System, it is important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil by using the lubrication points on the back cage plate, so that oil can penetrate the bearing. Do this when you lubricate your chain, if you have washed your bike or after riding in wet or muddy conditions. Please note: While there are visual similarities in the 9100 Series OSPW and 9200 Series OSPW, the spring tension settings, rotation stop tower placement, and mounting pin depth are slightly repositioned and as such the systems are not cross-compatible. Technologies: - Integrated stop tower for simple installation and durability. - Lifetime warranty on system cage. - Trusted design by World Champions and top athletes around the world. - 13/19 pulley wheel sizes. - Standard or CeramicSpeed bearings (multiple options in the selection menu). - Handbuilt CeramicSpeed bearings are installed in each pulley.
Originally perfected for Pro Tour mechanics, the PRS 22.2 Team Issue Repair Stand helps to mount bikes that are in need of essential maintenance. The solid rotation system allows you to approach your pride and joy from all angles and the fact it can function with any modern axle standard (including quick release and every size of thru-angle) ensures there is no need for adaptors. Extremely sturdy and sporting a solid tripod base, this Team Issue Repair Stand is the mechanics ultimate tool for applying that all-important fix to the bike. Should space be an issue, it also folds compactly.
The Flair park bike's low geometry has been specifically designed to help its rider learn the big impressive BMX tricks such as the flair or tailwhip. It's equipped with a high-tech gyro to enable barspins and tailwhips all day long without having to detangle your brake cable.Being lightweight it makes learning tricks that much easier. It's equipped with a fully sealed rear cassette hub and able to find the extra grip needed via the wallride 2.30" tyres its sits on. These are a hugely popular tyre favoured by professionals around the world. Look good, feel good, ride good.
A dependable workstand for the home mechanic with a deluxe clampUses the 100-5D Professional Micro-Adjust ClampHeavy duty micro-adjustable linkage clamp fits frame tubes up to 3 inches (76 mm)Working height of clamp adjusts from 53 to 67 inches (34 to 170 cm)Infinite 360 degree rotation of clamp head for perfect positioningTapered rotational locking systemFolds flat for easy storageConstructed of powder coated steel tubing for durabilityRubber feet are adjustable for uneven floors
This hand built limited edition OSPW System features a moulded carbon fibre cage for the best balance of low weight and durability. It is developed specifically for SRAM Red AXS and SRAM Force AXS systems and has two spring tension settings, that allow for a customised setup based on riding conditions. Limited Edition SRAM Red/Force AXS OSPW System The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. This OSPW System is also compatible with the 2020 11 speed SRAM Red eTap derailleur featuring a clutch. Please Note: While there are visual similarities with the SRAM RED/Force AXS derailleurs, this OSPW system is not compatible with the SRAM Rival AXS, or SRAM RED, Force, or Rival XPLR eTap AXS rear derailleurs. Please see our pulley wheels for SRAM AXS Road. In the Box: - Complete OSPW System for SRAM Red/Force AXS. - CeramicSpeed Pulley Oil, 15ml dropper bottle. - Custom tool for removal of stock cage and securing of OSPW System. Special notes: Custom tool included for removal of the stock cage and securing of OSPW. The factory clutch mechanism will remain intact and in stock form. There is no damage or modification to the clutch for the installation of the OSPW System. Manufacturer's Part Numbers: 110201 Gold Option 1 Coated 110200 Gold Option 2 Non Coated