Fox Suspension Float DPX2 Factory 3Pos-Adjust LV ShockBringing together the ride quality and tunability of Fox Suspension’s Float X2 and the lightweight simplicity of its dual piston system (DPS), the DPX2 Factory 3 Position Adjustable LV Rear Shock is one of its most advanced trail models. It features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade to add smoother and more reliable performance to your trail-ready mountain bike (MTB).Features: Finish: Genuine Kashima Coat with updated graphics Mount Type: Eyelets Compatibility: Frames with standard eyelet mounts Use: All-Mountain (AM), Trail Damper: Float DPX2 with 3-position lever with adjustable open mode offers 10 clicks to fine-tune compression, recirculating oil damper design for more control Air Sleeve: One-piece extra volume (EVOL) air sleeve Volume: Large volume Sizes: Imperial and metric sizes Shock Adjustment: Lever on shock or remote (optional remote sold separately) Full Lockout: No Shock Pump Included: No Mounting Kit Included: No (mounting hardware is bike frame specific)Manufacturer's Part Number: 190mm, 45mm Stroke: 973-01-314; 210mm, 50mm Stroke: 973-01-315; 210mm, 52.5mm Stroke: 973-01-316; 210mm, 55mm Stroke: 973-01-317; 230mm, 65mm Stroke: 973-01-312; 230mm, 60mm Stroke: 973-01-313; 185mm, 44mm Stroke: 973-01-318; 190mm, 50mm Stroke: 973-01-304; 200mm, 50mm Stroke: 973-01-305; 200mm, 57mm Stroke: 973-01-306; 215mm, 65mm Stroke: 973-01-307Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. A three-position lever with adjustable open mode offers 10 clicks to fine-tune compression. There's also a recirculating oil damper design for more control EVOL Air Sleeve: This lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPX2 Factory 3Pos-Adjust LV ShockBringing together the ride quality and tunability of Fox Suspension’s Float X2 and the lightweight simplicity of its dual piston system (DPS), the DPX2 Factory 3 Position Adjustable LV Rear Shock is one of its most advanced trail models. It features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade to add smoother and more reliable performance to your trail-ready mountain bike (MTB).Features: Finish: Genuine Kashima Coat with updated graphics Mount Type: Eyelets Compatibility: Frames with standard eyelet mounts Use: All-Mountain (AM), Trail Damper: Float DPX2 with 3-position lever with adjustable open mode offers 10 clicks to fine-tune compression, recirculating oil damper design for more control Air Sleeve: One-piece extra volume (EVOL) air sleeve Volume: Large volume Sizes: Imperial and metric sizes Shock Adjustment: Lever on shock or remote (optional remote sold separately) Full Lockout: No Shock Pump Included: No Mounting Kit Included: No (mounting hardware is bike frame specific)Manufacturer's Part Number: 190mm, 45mm Stroke: 973-01-314; 210mm, 50mm Stroke: 973-01-315; 210mm, 52.5mm Stroke: 973-01-316; 210mm, 55mm Stroke: 973-01-317; 230mm, 65mm Stroke: 973-01-312; 230mm, 60mm Stroke: 973-01-313; 185mm, 44mm Stroke: 973-01-318; 190mm, 50mm Stroke: 973-01-304; 200mm, 50mm Stroke: 973-01-305; 200mm, 57mm Stroke: 973-01-306; 215mm, 65mm Stroke: 973-01-307Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. A three-position lever with adjustable open mode offers 10 clicks to fine-tune compression. There's also a recirculating oil damper design for more control EVOL Air Sleeve: This lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this Factory Series mountain bike (MTB) rear shock boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements your ride. DPS Damper, EVOL Air Spring and Adjustments Engineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-467 Black 190x40mm Metric 972-01-468 Black 190x42.5mm Metric 972-01-469 Black 190x45mm Metric 972-01-470 Black 210x50mm Metric 972-01-471 Black 210x55mm Metric
This remote lever mounts on the left underneath your handlebars instead of a shift lever and delivers fast and accurate operation when you need to adjust your height.
Easy to install, this remote clamps around your handlebar to allow you to effortlessly control your Fox Suspension Transfer dropper seatpost. Offering improved ergonomics, this model makes operating your seatpost easier as you weave your way from trail to trail. Another benefit is its 34% lighter than the previous version, so you won't have to worry about weighing down your handlebar with unnecessary excess grams. Ideal for riders who already own the Fox Suspension Transfer dropper seatpost and want straightforward actuation on every trail adventure. The Gold Standard The Transfer seatpost is lighter and tighter than ever before. Less weight, reduced length and decreased insertion depth means a better fit on more frames. Improved durability and easier serviceability means more riding and less downtime. Available with up to 200mm of drop, Transfer is ready to tackle the nastiest terrain. Manufacturer's Part Number: 925-06-005 Black 2x/3x
Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride. DPS Damper, EVOL Air Spring and Adjustments Engineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj LV Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions. Technologies: - Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. - Updated graphics. - Dual Piston valve design improves both rebound and compression flow. - Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.
Ready for everything from backroad adventures to XC racing, this versatile dropper seat post is engineered for performance. It's part of Fox Suspension's prestigious Factory Series that's World Cup proven and includes the best-of-the-best technology, so you can stay in full control wherever your next ride takes you. Coming equipped with a genuine Kashima upper coating, it provides buttery smooth, ultra-durable operation, while its anodised lower coating delivers extra protection against wear and corrosion. Another highlight is its coil spring, internal cable routing and travel configuration options that are specifically developed for the rigours of gravel riding and cross country. Keeping its weight as low as possible, this Factory Series version also comes complete with titanium hardware for a further 10g of weight savings. Super Lightweight Dropper Seat Post Meet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has classed it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it finally brings the word “shred” into the super-lightweight XC and Gravel conversation. Technologies: Factory Series: “Factory” says it all. The best-of-the-best technology Fox Suspension have to offer is available in Factory Series models with a buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. - Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. - Longer travel configurations offer exposed length of 290mm for taller riders. - Shorter travel configurations offer shorter total length for smaller riders. - Coil spring for consistent return performance. - 70-85 degree seat angles are supported. - 7mm and 7x9mm saddle rails supported. - Compatible with 1x lever, which is Matchmaker, Shimano GRX, and I-SPEC EV compatible. (Sold separately). - Factory post includes Ti hardware for additional 10g weight savings. - Internal routing only. - Lightweight design. Manufacturer's Part Numbers: 925-01-201 Black 350mm 27.2 x 50mm 925-01-200 Black 370mm 27.2 x 70mm 925-01-206 Black 355mm 30.9 x 75mm 925-01-204 Black 380mm 30.9 x 100mm 925-01-207 Black 355mm 31.6 x 75mm 925-01-205 Black 380mm 31.6 x 100mm
This trail-ready rear shock is well-equipped for the most demanding of terrain conditions. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders. Adjustable Coil Spring Rear Shock Benefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a high-quality coil spring ready design and an updated damper. The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate. Please note: A coil spring is not included with this model but is available to purchase separately. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off. Manufacturer's Part Numbers: 978-01-054 Black 8.5 x 2.5" 978-01-053 Black 7.875 x 2.0"
Part of the Performance Elite series, this high-quality dropper seatpost is equipped with a black anodised upper coating that provides an additional level of protection against wear and corrosion wherever your adventure takes you. Fox Suspension has also kitted it out with a powdercoat lower coating that allows it to handle all of challenges associated with all-day epics on your favourite trails and day-long adventures on your gravel bike. Also benefitting from internal cable routing, this versatile model provides a sleek look on your ride while also minimising any risk of damage from dirt or debris. Super Light Done Right Meet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has branded it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the super-lightweight cross country (XC) and gravel conversation. Performance Elite Series Dropper Seatpost Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, patent-pending head design and proven internals as the Factory Series but they feature a black anodised upper instead of a genuine Kashima coating. This Performance Elite series model's anodised upper is ideal for riders who want increased strength and durability on their ride, while also benefitting from its lightweight and responsive actuation. Technologies: - Updated lightweight design. - Updated Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. - 2-position mechanical post that locks at the top and bottom only. - Longer travel configurations offer exposed length of 290mm for taller riders. - Shorter travel configurations offer shorter total length for smaller riders. - Coil spring for consistent return performance. - Internal routing only. - 27.2, 30.9 and 31.6mm diameter options to choose from. - 50, 70, 75, and 100mm drop options to choose from. - 70-85deg seat angles are supported. - 7mm and 7x9 saddle rails supported. - 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible (levers available separately). Manufacturer's Part Numbers: 925-01-203 350mm 27.2 x 50mm 925-01-202 370mm 27.2 x 70mm 925-01-210 355mm 30.9 x 75mm 925-01-208 380mm 30.9 x 100mm 925-01-211 355mm 31.6 x 75mm 925-01-209 380mm 31.6 x 100mm
Part of the brand's renowned Factory Series, this mountain bike (MTB) rear shock is engineered for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails. Heavyweight Features in a Lightweight Package Designed specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. - Updated chassis and damper. - High-flow main piston. - Air seal package. - Volume spacers with smaller increments. - MCU bottom out bumper. - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. - Independent firm mode circuit – Clockable 2 position adjuster. - Increased rebound adjuster range (over DPX2). - Optimized reservoir lengths per shock size. - Hydraulic top out feature. - Reduced damper noise. - Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. - Bearing hardware compatible both sides. - Air valve location offers improved frame fitment and pump access. Manufacturer's Part Numbers: 979-01-053 230 x 65mm Metric 979-01-054 185 x 52.5mm Trunnion 979-01-056 185 x 55mm Trunnion 979-01-058 205 x 60mm Trunnion 979-01-059 205 x 62.5mm Trunnion 979-01-041 190 x 45mm Metric 979-01-043 210 x 50mm Metric 979-01-045 210 x 52.5mm Metric 979-01-047 210 x 55mm Metric 979-01-049 230 x 57.5mm Metric 979-01-051 230 x 60mm Metric
This Factory Series mountain bike (MTB) rear shock is built for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures by providing coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders. Coil Spring and Adjustments Ready for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel. Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit – 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom-out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2). Manufacturer's Part Numbers: 978-01-029 Black 210x50mm Metric 978-01-031 Black 210x52.5mm Metric 978-01-033 Black 210x55mm Metric 978-01-035 Black 230x57.5mm Metric 978-01-037 Black 230x60mm Metric 978-01-039 Black 230x65mm Metric 978-01-041 Black 185x52.5mm Trunnion 978-01-043 Black 185x55mm Trunnion 978-01-045 Black 205x60mm Trunnion 978-01-047 Black 205x62.5mm Trunnion
Part of Fox Suspension's renowned Factory Series, this mountain bike (MTB) rear shock is equipped with a stunning genuine Kashima coating that offers slippery smooth performance, increased durability on the more demanding of terrains, and also complements your ride with its eye-catching finish. Adjustable Rear Shock with Variable Valve Control (VVC) Coming feature-packed with a design that's intended to exceed the demands of Fox Suspension's Factory-level riders, this rear shock is kitted out with a two-position lever. Developed for ease of use, its lever makes it simple to switch between open and firm modes to suit the terrain or course conditions on your ride. Another highlight is its range of adjustment features that include high and low-speed compression as well as high and low-speed rebound. This version is also equipped with Variable Valve Control (VVC) for improved high-speed rebound tunability. As a result, you'll be able to dial in your ideal settings to match your riding style and enjoy more rider-tuned rear suspension performance. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom-out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.