Key Features:FACT carbon construction blends high durability, stiffness, and comfortCylindrical aluminium head assembly adjusts fore-aft and tilt with an easy-access single boltSetback: 0 / 20mmDiameter: 27.2mmAvailable in the following sizes:27.2 x 350 x 2027.2 x 400 x 2027.2 x 400 x Zero
The Thomson Masterpiece Seatpost is not for everyone. Thomson wanted to create the best seatpost possible without regard to cost. The serious cyclist will want to own the Thomson Masterpiece Seatpost. Masterpiece posts weigh approximately 40 grams less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson Seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over; including the oval inner diameter. We are able to hold closer tolerances by machining than by extrusion alone. Machining all over an already beautiful design makes the Masterpiece Seatpost a work of art.The tube and head of the Thomson Masterpiece seatpost is integral-machined from one single piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight allowing higher strength at low weights. Natural ellipse bore inside tube for optimum strength to weight ratio.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components and sometimes pieces of the tube and head flying off in all directions. Every component of the Masterpiece seatpost is 100 percent American made. This includes all fasteners and forgings.
Avid Post Bracket - 40 P (Front 200/Rear 180), Inc. StainlessBracket Mounting BoltsAn Avid Post Bracket set including Stainless Caliper Mounting Bolts (CPS and Standard)
Avid Post Spacer Set - 20 S (Front 180/Rear 160), Inc. Stainless Caliper Mounting Bolts (CPS & Standard)The Avid Post Spacer set includes Caliper Mounting Bolts (CPS & Standard)
Avid Post Bracket - 30 P (Rear 170), Inc. Stainless Caliper Mounting Bolts (CPS & Standard)An Avid Post Bracket set including Stainless Caliper Mounting Bolts (CPS and Standard)
Key Features:High spec entry level seatpost,2 bolt easy adjustment, low profile clamps,Lightweight aluminium hardware,Butted tube is strong yet lightweight,Forged 6061 heat treated aluminium tube.Specification:Built for XC/Trail,Length 375mm/350mm.Weight 295g (27.2mm).
The Turbine seatpost sets a new standard for a performance aluminum post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness. The aluminum tube is manufactured from 2014 alloy, offering outstanding fatigue & strength for a lightweight XC and trail post.Key Features:Race Face exclusive new Hunter head design,Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head,Thumbscrew tightening system allows quick dial in of the saddle angle by hand,Angled clamp bolts allow easy tool access for hassle free adjustment and tightening,The rubber seatpost grommet fully seals the post to prevent water entering your seat tube,Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon,Wide lower cradle gives extra rail support for lightweight saddle rails,Narrow upper cradle increases the amount of forward/back saddle adjustment,Tilt Adjustment 6° up 12° down with Zero offset,The seatpost tube is 3D forged from 2014 heat-treated aluminium for optimal strength to weight ratio.,Race Face's triple butting design maintains strength in critical areas while reducing overall weight.,The tube is anodized & shot peened for increased fatigue life..Specifications:Built For: XC/Trail/AM,Size: 27.2, 30.9, 31.6mm,Length: 400mm,Weight: 260g(30.9).
The new Chester seat post is a durable, no nonsense post that can take on rock gardens and plenty of rough landings while still leaving bills in your pocket for aprés ride festivities.Key Features:Seat tube drawn from 6061 Alloy,Proven dual bolt, multi-adjustable head design.,Shot peened for high impact strength & fatigue resistance.,Length: 325mm,Weight: 231g (31.6),Material: 6061 .
The Next seatpost sets a new standard for a performance carbon post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness. The carbon tube is engineered & manufactured using Race Face's optimized carbon technology process, offering outstanding strength for a lightweight XC and trail post.Key Features:Features Race Face exclusive new Hunter head design,Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head,Thumbscrew tightening system allows quick dial in of the saddle angle by hand,Angled clamp bolts allow easy tool access for hassle free adjustment and tightening,The rubber seatpost grommet fully seals the post to prevent water entering your seat tube,Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon,Wide lower cradle gives extra rail support for lightweight saddle rails,Narrow upper cradle increases the amount of forward/back saddle adjustment,Tilt Adjustment 6° up 12° down with Zero offset,The seatpost tube is manufactured using our proven Next optimized carbon technology,The highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post..Specifications:Built For: XC/Trail,Size: 27.2, 30.9 & 31.6mm,Length: 400mm,Weight: 250g (30.9mm).
Key Features:Ice Technologies heat managementHigh power 4-ceramic piston caliperEasy and clean bleeding thanks to one way bleeding caliper and new funnel bleeding tool.
Interchangeable, precision engineered disc calliper mount adapterFor post type disc callipers to be mounted to road flat mount type front forks with 160 mm disc rotors
Key Features:Ice Technologies heat management including brake pads with aluminium fins, Ice-Tech rotor with radiator fins and extra-long banjo hose,High-performance calliper with 4-ceramic pistons in two different diameters,Ergonomic anti-slip 1.5 finger brake lever,Servo Wave Mechanism with short lever stroke,Adjustable free stroke and toolless reach adjustment,One-way bleed system: quick, easy and clean with funnel tool,2nd generation I-spec-B-B compatible,Weight: 302 g (front brake incl. brake lever, hose, brake) .