Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Waterproof One Piece MTB Suit IILaugh in the face of wet weather and muddy mountain bike trails with the Endura MT500 Waterproof One Piece MTB Suit II. Waterproof and breathable, you'll never have been so comfortable when the weather turns nasty. While others take refuge inside when the rain clouds burst, the MT500 Waterproof One Piece MTB Suit II uses fully waterproof 3-layer ExoShell40DR fabric and seam-sealed construction to keep you outside and riding. While its high degree of waterproofness keeps rain out, ExoShell40DR is also extremely breathable, preventing that horrible sweaty and clammy feeling you might experience with poorer MTB garments. If you find yourself feeling a bit too warm though, underarm vents let you boost cool airflow to your core. And if the sun decides to make an appearance, zip off the lower legs and enjoy a shorts onesie. With wet and muddy trails comes more abrasion and rubbing from mud kicked up from your tyres. To combat this, Endura have used tough, abrasion resistant panels across the seat area. Silicone gripper prints to the shoulders hold backpacks in place too. And when it comes to pedalling, the ergonomically positioned stretch panels and relaxed MTB-specific fit makes it easy to spin the pedals and move across slippery terrain. Features:Materials: 80% Polyamide, 15% Polyester, 5% ElastaneExoShell40DR 3-Layer - Waterproof fabric in a fully seam-sealed constructionOne-piece, relaxed fit, split front design for maximum mud protection and comfort fitDurable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel3D adjustable helmet-compatible hoodVentilation by large underarm 2-way zipped vent extending onto the back, compatible with backpackFront pockets doubling as vents zipped lower hand pockets and a sleeve pocket for lift passZip-off lower legs for all-day riding comfortWater-repellent front zip with storm flapZipped fly with popper closureSoft-touch lycra inner cuff for added comfort and protectionWATERPROOF: 20000 mm - BREATHABLE: 40000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The next-gen ultimate foul weather mountain bike onesie that packs all of the tech needed to protect you from day long downpours that turn your favourite trails into a full blown rivers. Key Features: Exceptionally breathable and durable ExoShell40DR 3-Layer waterproof fabric in a fully seam-sealed construction , One piece, split front design for maximum mud protection and comfort fit , Durable shoulders with silicone grip and ergonomically positioned stretch upper and leg panels plus durable seat panel , 3D adjustable helmet hood , Ventilation by large underarm 2 way zipped vent extending onto back, compatible with back pack and zip off lower legs for all day riding comfort , Water-repellent front zip with storm flap, Front pockets doubling as vents, zipped lower hand pockets and sleeve pocket for lift pass , Zipped fly with popper closure , Soft touch lycra inner cuff for added comfort and protection • Reflective trims, 90 Day Satisfaction Guarantee.
OVERVIEW “AC-2” = Dual Angular Contact. This describes the use of both angular contact bearings&and&angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. The AC-2 Cassette Hub also offers changeable pawl/spring configurations for varying points of driver engagement to suit a rider’s personal preference. HERE ARE A FEW KEY POINTS OF THE AC-2 BMX DISC BRAKE CASSETTE HUB: -The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell&without&any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in&perfect&alignment with each other! This ensures superior bearing performance and less chance of premature wear. -Hub shell and driver literally “float” on the axle. The only force on the bearings is supplied by the wave spring(which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! -The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! -The AC-2 hub cassette driver is also unique. It allows for changeable P.O.E.(points of engagement). The hub driver comes standard with 6 pawls and springs. This option offers 96 P.O.E. -Maximum engagement. The other choice is to use just 3 pawls and springs. P.O.E. is reduced to 48 and minimal drag is achieved. This is a rider preference choice and both have a unique sound! -The proprietary Profile Racing 10 spline aluminum cassette body allows you to use Profile's standard steel, Elite, or aluminum cogs ranging from 12t to 18t. -ISO Standard 6 bolt disc brake mount.
Sold standard with a 14mm Hollow Male Axle (You can Upgrade to Titanium at Checkout) anx a 9t Driver! - Select your drive side and Colour and then select your Slack ring at checkout. Titanium axle and driver Upgrades also available at checkout . Hand Made in the USA! The Z-coaster has been designed from the ground up by Profile to be the most versatile and reliable Freecoaster hub. The hub can be used as either a Freecoaster or regular cassette hub bu simply switching the Slack-Cam ring inside the hub. The Shell is machined from 6061 aluminium and features a hollow 14mm Crmo Axle (Titanium upgrades available at Checkout). The Z coaster features a unique Driver which uses Z shape pawls which allows for adjustment from 1/8 of a crank to 1/3 of a crank by changing the Slack Cam ring. The driver is also supported from the outside by a huge bearing making this hub ultra reliable and maintenance free. Finished in super deep anodised colours. ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:14mm Male DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:583g / 20.55oz
Available with a huge choice of 14mm female bolts or 10mm bolts with a 9t driver - Select your drive side and Colour and then select your Slack ring and bolts at the Checkout!. Titanium driver Upgrades also available at checkout! Hand Made in the USA! The Z-coaster has been designed from the ground up by Profile to be the most versatile and reliable Freecoaster hub. The hub can be used as either a Freecoaster or regular cassette hub bu simply switching the Slack-Cam ring inside the hub. The Shell is machined from 6061 aluminium and features a Crmo centre female axle with choice of 10mm or 14mm bolts (Titanium upgrades available at Checkout). The Z coaster features a unique Driver which uses Z shape pawls which allows for adjustment from 1/8 of a crank to 1/3 of a crank by changing the Slack Cam ring. The driver is also supported from the outside by a huge bearing making this hub ultra reliable and maintenance free. Finished in super deep anodised colours. ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:Female Bolts DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:559g / 19.7oz
Sold standard with a 14mm Hollow Male Axle (You can Upgrade to Titanium at Checkout) anx a 9t Driver! - Select your drive side and Colour and then select your Slack ring at checkout. Titanium axle and driver Upgrades also available at checkout . Hand Made in the USA! The Z-coaster has been designed from the ground up by Profile to be the most versatile and reliable Freecoaster hub. The hub can be used as either a Freecoaster or regular cassette hub bu simply switching the Slack-Cam ring inside the hub. The Shell is machined from 6061 aluminium and features a hollow 14mm Crmo Axle (Titanium upgrades available at Checkout). The Z coaster features a unique Driver which uses Z shape pawls which allows for adjustment from 1/8 of a crank to 1/3 of a crank by changing the Slack Cam ring. The driver is also supported from the outside by a huge bearing making this hub ultra reliable and maintenance free. Finished in super deep anodised colours. ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:14mm Male DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:583g / 20.55oz
Available with a huge choice of 14mm female bolts or 10mm bolts with a 9t driver - Select your drive side and Colour and then select your Slack ring and bolts at the Checkout!. Titanium driver Upgrades also available at checkout! Hand Made in the USA! The Z-coaster has been designed from the ground up by Profile to be the most versatile and reliable Freecoaster hub. The hub can be used as either a Freecoaster or regular cassette hub bu simply switching the Slack-Cam ring inside the hub. The Shell is machined from 6061 aluminium and features a Crmo centre female axle with choice of 10mm or 14mm bolts (Titanium upgrades available at Checkout). The Z coaster features a unique Driver which uses Z shape pawls which allows for adjustment from 1/8 of a crank to 1/3 of a crank by changing the Slack Cam ring. The driver is also supported from the outside by a huge bearing making this hub ultra reliable and maintenance free. Finished in super deep anodised colours. ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:Female Bolts DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:559g / 19.7oz
The Time Xpro 15, the ultimate expression of pedal technology. The all new carbon body and new design creates a more powerful structure to transfer power from the cyclist to the road. Time's ultimate road performance pedalFast and easy cleat engagementThree tensions settings of carbon bladeLow stack height for good clearanceDesigned to be aero and light weightCleats included with all pedal purchasesPower transfer and stability are also improved with a larger pedal surface area of 725mm-squared compared with the already large surface area of the XPRESSO at 700mm-squared. The ICLIC system has been redesigned to allow for a more positive engagement and to be more comfortable. Finally, the XPRO 15 shares the same watt-saving CeramicSpeed bearings and super light hollow titanium spindle from the XPRESSO 15 resulting in an overall weight of 87.3 grams per pedal. The carbon blade is also adjustable in 3 positions to optimize engagement tension. Like the XPRESSO, the stack height is low, keeping the cyclist's sole as close to the centre of the pedal axle as possible. This, along with the large pedal surface area results in incomparable pedalling efficiency and comfort. We recommend a maximum weight of 90kg.Specifications:Axle component: Hollow Titanium axleBearings: CeramicBody component: Carbon-filledCleats: ICLICPedal stack height: 13.5mmAngular freedom: +5° to -5° with free foot cleats, 0° with fixed foot cleatsContact surface area: 725 mm2Distance pedal spindle / crank arm: 53mmLateral freedom: 2.5 mm with free foot cleats, 0 with the fixed foot cleatsRelease angle: 2.5 mm with free foot cleats, 0 with the fixed foot cleatsTension: 3 different settings of carbon bladeThreading: 9/16 - 20 inchWeight (per pedal): 87gColour (Pedal): Black/WhiteAccessories: ICLIC free foot cleatsIntended use: RoadPower Measurement: Not CompatiblePart Weight (g): 87