Token MTX BSA Threaded Bottom Bracket for Shimano 24mm
Our standard BSA English threaded Bottom Bracket is Shimano™ compatible.The 7075 T6 alloy cups feature CNC finishing and standard anodizing. Smooth and durable, the high-grade Enduro 2437 steel bearings are fully sealed and are a fantastic replacement BB for your Shimano™ drivetrain.Compatible with Shimano™ Hollowtech II cranks.
Key Features:Axle: 30mm,Shell: 68mm,Shell: 73mm,Type: 392Evo,Type: MTB,Type:Threaded.
Replacement External Bearing BB to fit FSA Gamma Drive MegaExo compatible cranks.Key Features:Oversized cartridge bearings,Forged steel and CNC machined external cups,Composite centre sleeve with double o-ring seals,Weight: 200g,Spindle: 19mm,Shell: 68, 73mm.
Feel The New X-PerienceLook constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun.The Best Power To Weight Ratio: All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial. Look’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product.Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh. The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market.Lateral Contact Support: Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.Mechanism Geometry: The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.Adjustable Tension: An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level.Key Features:Usage: XC Competition and Leisure,Tension: 6 to 14,Body: Composite,Spindle: Chromoly +,Float: 6°,Platform Material:: Chromoly,Platform Area: 515 mm²,Platform Width: 60 mm,Stack Height + Cleats: 16,8 mm (10,7 + 6,1 mm),Weight Pedal: 180 g,Weight Pair + Cleats: 464 g,Warranty: 2 years.
Chris King bottom brackets utilize Fit Kits to ensure that cranks mate perfectly with Chris King's precision bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.For DUB cranks we have two fit kits to choose from, Fit Kit #1 DUB A and Fit Kit #2 DUB B.Fit Kit #1 DUB A is going to cover all DUB mountain fitments, as well as DUB road fitments with ThreadFit T47 bottom brackets.Fit Kit #2 DUB B is for ThreadFit 30 with DUB road cranks.For use with ThreadFit 30, ThreadFit T47 30i, ThreadFit T47 30x68mm, 73mm, 73mm SB+, 86.5mm, 92mm, and 92mm SB+ BB shells.Common Cranks: DUB 28.99mm spindleFor DUB mountain cranks there are a few extra fitments notes to be aware of. If you have a 68mm BB shell you will need two 2.5mm Cup Spacers.For DUB Super Boost cranks you will need one additional spindle spacer kit.
A good looking freestanding bike rack that will carry two bikes as standard, and which can be upgraded to carry four bikesConstructed from beautiful furniture grade American red Oak from sustainable sources, with a hand-rubbed oil stain finish to show off the grain of the woodStands 80 inches / 203.2 cm high, with a compact footprint of 28 inches / 71 cm for width and depthVinyl coated arms hold and protect your bike, and can be adjusted independently to accommodate many shapes and sizes of frameThe front wheel of your bike can be stabilised with the Velcro straps givedExtra bike kits are availableA robust basket can be added, complete with a pair of shoe hooks, to keep your equipmentneat and tidyMaximum recommended weight is 200 lbs / 90 kgAll assembly hardware is included, and some simple DIY is required
One piece light weight alloy track cranks,165/170/172/175mm,Includes ring,
We don’t want to start a fight but we think it’s fair to claim that there are some problems with press fit bottom brackets. They creak, don’t last all that long and are installed and removed with tools that cavemen would recognise. TOKEN’s Thread Fit bottom bracket solves the creaking issues, improves bearing life and adds stiffness to the bottom bracket.We start with our Fusion technology; it is a combination of plastic and fibre that cover an alloy bottom bracket shell. The composite material allows it to be precisely machined and fit snugly in the frame so it doesn’t move in the frame and sound like grandma’s clicking and creaking arthritic knees. But plastic and fibre don’t do a good job of supporting bearings; poorly supported bearings can wear prematurely.We house the bearings in an alloy shell and wrap it with plastic and fibre. Fits BB86, BB89.5, BB92, BB30 and PF30 on Shimano 24mm Axles.
The Chris King ThreadFit 24 Bottom Bracket elevates your ride experience to a whole new realm. It’s not only phenomenally durable but fully-serviceable and crucially, silent. If you value longevity and a smooth ride day in, day out, then this is an indispensable upgrade to your bike.Bred from over 30 years of bearing development, the ThreadFit Bottom Bracket has been explicitly constructed as the best possible housing for your cranks. In line with Chris King’s guiding ethos, the ThreadFit is built to outlast your material use of it. Rest assured that with a 5-year warranty and tolerances usually only employed in aerospace components, this is a truly unrivalled bottom bracket.The meticulous care and attention invested into the production of each and every ThreadFit engineered, manufactured and assembled in-house at Chris King’s HQ in Portland, Oregon reflects Chris King’s lasting commitment to quality and environmentally conscious manufacturing. Bike disciplines, trends and fashions change but you’ll never go amiss with a ThreadFit Bottom Bracket.Chris King’s legendary steel bearings and heat-treated, surgical-grade steel races not only form a perfectly integrated system but actually become smoother as they burnish with use – wearing in, rather than wearing out. In contrast to many other manufacturers, Chris King has complete control over every aspect of production, meaning that they can make bearings in-house to a specification that simply wouldn’t be achieved otherwise.What all of this means for you is less time servicing your bike and more time enjoying riding it, with the added bonus of silky-smooth, soundless movement. Creaky cranks are a thing of the past with the ThreadFit.Stock size is for a standard 24mm axle ( Shimano Standard) and a 68 - 73mm shell width. We stock a range of conversion kits that allow our ThreadFit 24 to be used with a wider selection of road and mountain bike cranksets and shell widths.Key FeaturesEngineered, manufactured and assembled in Portland, Oregon USA,5-year built-to-last warranty,Legendary made-in-house steel bearings,Easily serviceable with an integrated grease injection system,Find your fit with a wide range of conversion kits.
Bearing and spacer kit for use with American type MID BMX BB systems, (Bearings fit directly into frame)19mm (193g)22mm (180g).