RapidRacerProducts Bike Bearing KitThe RapidRacerProducts Bike Bearing Kit is perfect for the home mechanic who needs to extract and insert bike bearings. This kit ensures that you can accurately insert and remove frame bearings with ease, without causing any damage to the bearing or frame. Kit Number: Bearing Name/Inner Bore (mm)/Outer Diameter (mm):Kit 1: 688 2RS/8/16Kit 2: 698 2RS/8/19Kit 3: 608 2RS/608-E 2RS/8/22Kit 4: 6800 2RS/61800 2RS/10/19Kit 5: 6900 2RS/61900 2RS /10/22Kit 6: 6000 2RS/10/26Kit 7: 6901 2RS/61901 2RS/12/24Kit 8: 6001 2RS/12/28Kit 9: 63802/6802 2RS/61802 2RS/15 /24Kit 10: 1526 2RS/15/26Kit 11: 6902 2RS/6902-E 2RS/61902 2/15/28Kit 12: 6002 2RS/15/32Kit 13: 6803 2RS/61803 2RS/17/26Kit 14: 6903 2RS-E2RS/61903-E 2RS/17 /30Kit 15: 6003 2RS/17/35Kit 16: 6804 2RS/61803 2RS/20/32*Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing boreholeBuy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts Bike Bearing KitThe RapidRacerProducts Bike Bearing Kit is perfect for the home mechanic who needs to extract and insert bike bearings. This kit ensures that you can accurately insert and remove frame bearings with ease, without causing any damage to the bearing or frame. Kit Number: Bearing Name/Inner Bore (mm)/Outer Diameter (mm):Kit 1: 688 2RS/8/16Kit 2: 698 2RS/8/19Kit 3: 608 2RS/608-E 2RS/8/22Kit 4: 6800 2RS/61800 2RS/10/19Kit 5: 6900 2RS/61900 2RS /10/22Kit 6: 6000 2RS/10/26Kit 7: 6901 2RS/61901 2RS/12/24Kit 8: 6001 2RS/12/28Kit 9: 63802/6802 2RS/61802 2RS/15 /24Kit 10: 1526 2RS/15/26Kit 11: 6902 2RS/6902-E 2RS/61902 2/15/28Kit 12: 6002 2RS/15/32Kit 13: 6803 2RS/61803 2RS/17/26Kit 14: 6903 2RS-E2RS/61903-E 2RS/17 /30Kit 15: 6003 2RS/17/35Kit 16: 6804 2RS/61803 2RS/20/32*Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing boreholeBuy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts Bike Bearing KitThe RapidRacerProducts Bike Bearing Kit is perfect for the home mechanic who needs to extract and insert bike bearings. This kit ensures that you can accurately insert and remove frame bearings with ease, without causing any damage to the bearing or frame. Kit Number: Bearing Name/Inner Bore (mm)/Outer Diameter (mm):Kit 1: 688 2RS/8/16Kit 2: 698 2RS/8/19Kit 3: 608 2RS/608-E 2RS/8/22Kit 4: 6800 2RS/61800 2RS/10/19Kit 5: 6900 2RS/61900 2RS /10/22Kit 6: 6000 2RS/10/26Kit 7: 6901 2RS/61901 2RS/12/24Kit 8: 6001 2RS/12/28Kit 9: 63802/6802 2RS/61802 2RS/15 /24Kit 10: 1526 2RS/15/26Kit 11: 6902 2RS/6902-E 2RS/61902 2/15/28Kit 12: 6002 2RS/15/32Kit 13: 6803 2RS/61803 2RS/17/26Kit 14: 6903 2RS-E2RS/61903-E 2RS/17 /30Kit 15: 6003 2RS/17/35Kit 16: 6804 2RS/61803 2RS/20/32*Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing boreholeBuy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts Bike Bearing KitThe RapidRacerProducts Bike Bearing Kit is perfect for the home mechanic who needs to extract and insert bike bearings. This kit ensures that you can accurately insert and remove frame bearings with ease, without causing any damage to the bearing or frame. Kit Number: Bearing Name/Inner Bore (mm)/Outer Diameter (mm):Kit 1: 688 2RS/8/16Kit 2: 698 2RS/8/19Kit 3: 608 2RS/608-E 2RS/8/22Kit 4: 6800 2RS/61800 2RS/10/19Kit 5: 6900 2RS/61900 2RS /10/22Kit 6: 6000 2RS/10/26Kit 7: 6901 2RS/61901 2RS/12/24Kit 8: 6001 2RS/12/28Kit 9: 63802/6802 2RS/61802 2RS/15 /24Kit 10: 1526 2RS/15/26Kit 11: 6902 2RS/6902-E 2RS/61902 2/15/28Kit 12: 6002 2RS/15/32Kit 13: 6803 2RS/61803 2RS/17/26Kit 14: 6903 2RS-E2RS/61903-E 2RS/17 /30Kit 15: 6003 2RS/17/35Kit 16: 6804 2RS/61803 2RS/20/32*Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing boreholeBuy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts Bike Bearing KitThe RapidRacerProducts Bike Bearing Kit is perfect for the home mechanic who needs to extract and insert bike bearings. This kit ensures that you can accurately insert and remove frame bearings with ease, without causing any damage to the bearing or frame. Kit Number: Bearing Name/Inner Bore (mm)/Outer Diameter (mm):Kit 1: 688 2RS/8/16Kit 2: 698 2RS/8/19Kit 3: 608 2RS/608-E 2RS/8/22Kit 4: 6800 2RS/61800 2RS/10/19Kit 5: 6900 2RS/61900 2RS /10/22Kit 6: 6000 2RS/10/26Kit 7: 6901 2RS/61901 2RS/12/24Kit 8: 6001 2RS/12/28Kit 9: 63802/6802 2RS/61802 2RS/15 /24Kit 10: 1526 2RS/15/26Kit 11: 6902 2RS/6902-E 2RS/61902 2/15/28Kit 12: 6002 2RS/15/32Kit 13: 6803 2RS/61803 2RS/17/26Kit 14: 6903 2RS-E2RS/61903-E 2RS/17 /30Kit 15: 6003 2RS/17/35Kit 16: 6804 2RS/61803 2RS/20/32*Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing boreholeBuy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts Bike Bearing KitThe RapidRacerProducts Bike Bearing Kit is perfect for the home mechanic who needs to extract and insert bike bearings. This kit ensures that you can accurately insert and remove frame bearings with ease, without causing any damage to the bearing or frame. Kit Number: Bearing Name/Inner Bore (mm)/Outer Diameter (mm):Kit 1: 688 2RS/8/16Kit 2: 698 2RS/8/19Kit 3: 608 2RS/608-E 2RS/8/22Kit 4: 6800 2RS/61800 2RS/10/19Kit 5: 6900 2RS/61900 2RS /10/22Kit 6: 6000 2RS/10/26Kit 7: 6901 2RS/61901 2RS/12/24Kit 8: 6001 2RS/12/28Kit 9: 63802/6802 2RS/61802 2RS/15 /24Kit 10: 1526 2RS/15/26Kit 11: 6902 2RS/6902-E 2RS/61902 2/15/28Kit 12: 6002 2RS/15/32Kit 13: 6803 2RS/61803 2RS/17/26Kit 14: 6903 2RS-E2RS/61903-E 2RS/17 /30Kit 15: 6003 2RS/17/35Kit 16: 6804 2RS/61803 2RS/20/32*Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing boreholeBuy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts Bike Bearing KitThe RapidRacerProducts Bike Bearing Kit is perfect for the home mechanic who needs to extract and insert bike bearings. This kit ensures that you can accurately insert and remove frame bearings with ease, without causing any damage to the bearing or frame. Kit Number: Bearing Name/Inner Bore (mm)/Outer Diameter (mm):Kit 1: 688 2RS/8/16Kit 2: 698 2RS/8/19Kit 3: 608 2RS/608-E 2RS/8/22Kit 4: 6800 2RS/61800 2RS/10/19Kit 5: 6900 2RS/61900 2RS /10/22Kit 6: 6000 2RS/10/26Kit 7: 6901 2RS/61901 2RS/12/24Kit 8: 6001 2RS/12/28Kit 9: 63802/6802 2RS/61802 2RS/15 /24Kit 10: 1526 2RS/15/26Kit 11: 6902 2RS/6902-E 2RS/61902 2/15/28Kit 12: 6002 2RS/15/32Kit 13: 6803 2RS/61803 2RS/17/26Kit 14: 6903 2RS-E2RS/61903-E 2RS/17 /30Kit 15: 6003 2RS/17/35Kit 16: 6804 2RS/61803 2RS/20/32*Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing boreholeBuy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Rear MudguardSuper-protective against the mud, muck and spray of the enduro run, this rear mudguard does all it can to keep you clean on every ride. Dotted with 43 snap-off top holes to fit straight braces between the seat stays and an optimised indent which increases tyre clearance by 4mm, it is the ideal mudguard for a variety of wheels. Made from a durable polypropylene, it protects your rear suspension as well as the rest of your back end, making it a perfect choice for the daring downhill rider.Features:Material: Polypropylene with gloss finishProtection: Seal ShieldWheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3"Length: 352mmWeight: 64gBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Max Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Maximum Protection RapidRacerProducts offers the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer - 21mm longer - than some available offerings as this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the Proguard Max Mudguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
RapidRacerProducts ProGuard Max Front MudguardShield yourself from unwanted dirt and spray when tackling tough terrain thanks to the ProGuard Max Mudguard from RapidRacer. The Max model features a longer coverage length of 21mm at the front and 68mm at the back to help you stay mud-free. Features:Indent at fork brace for additional clearance24 crown holes for a massive range of mounting optionsCan be used with any fork travel6x Zip Ties included with each guardWheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3" widthFork Compatibility: All forks including Boost (reverse arch forks not compatible)Weight: 133g (guard only)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard V2 Mini Front MudguardThe ProGuard V2 Mini Front Mudguard from RapidRacerProducts is a durable, stylish and low-profile front mudguard that's optimised for use with suspension forks. Plus, it's compatible with multiple wheel sizes with tyre sizes up to 3" tyres and feature integrated fork seal protectors. The ProGuard is an amazing new front mudguard from RapidRacerProducts that's designed for use with disc brake mountain bikes. Offering unmatched protection from mud and spray, it's perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. This guard is engineered specifically to increase tyre clearance, improve fit, and reduce mud clogging issues seen with this type of mudguard. Plus, this mini option offers a very compact design for all year-round protection and unmatched levels of protection for a guard of this size.The ProGuard range of mudguards have a soft high gloss finish which is a characteristic of the highly polished mould and the special polypropylene mix, this unique mix has been specifically blended for: Cold Weather Strength High Impacts High Flexibility High DurabilityAs a result of achieving the above properties it means that the surface layer is soft and will scratch easily, you must also be careful about putting any chemicals onto the surface as it may tarnish the finish. That said RapidRacerProducts have tested and can recommend the following chemicals to use: Silicone: Spray high quality silicone onto surface and very gently remove with a clean cloth to maintain a high gloss finish and to stop dirt and water from sticking. Bike Cleaner: Non caustic bike cleaners can be used on the ProGuard mudguard GT85/WD40/Solvents: Only rub these on the surface if you want to remove the gloss and display a matte finish to match your bike.Optimal Front Cover Protection The front has been made longer than some of the offerings out there as RapidRacerProducts see this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Convenient and Durable Snap-Off Hole CoversRapidRacerProducts have added hole covers that reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the cable tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including boost forks (except reverse arch), this allows you to customise your fit.Rear Flick Mud and Spray ProtectionThe rear flick is designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned.Stylish and Easy to Use Sticker Recess The recess down the centre is a nice easy reference to apply coloured stickers to, but it has a more important job, this recess prevents the sticker having to sit proud on the surface of the guard making it vulnerable to durability and jet wash issues. The supertack glue used on the stickers is strong, although it's fair to say that no sticker is able to withstand a sustained attack from a powerful jet wash, although the recess does prevent a direct hit. Suspension Fork Seal Shield RapidRacerProduct's widely acclaimed seal shield has made it to the proguard as a means of offering greater protection for your seals from high velocity mud and spray, the seal shield section also provides additional strength and rigidity to the rear reducing flex. Zip Ties Included for Simple and Secure Mounting Six cable ties are provided with each mudguard, the holes on the side arms are mandatory requiring four leaving the other two for the fork brace (although more could be added if desired). Features: Dimensions: 386mm long Compatibility: Wheels: 26”, 27.5”, 29” Tyre Clearance: Up to a 3” Forks: All forks including Boost forks (except reverse arch) Fork Travel: Any travel Weight: 85g (without cable ties)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Standard Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer to improve the protection of the face and eyes when riding at high speed. The turndown at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the RapidRacerProducts Proguard Standard Mudguard as a means of offering greater protection for your seals from high-velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.