This superb brake pad set is specially designed for use with Formula Mega, The One, C1, R1, RX, RO, T1, CR3 disc brakes. Additionally, this stunning model features an air-cooled aluminium heat sink for massive temperature reduction. Its copper plated backing plate and sintered front handles even the most extreme conditions efficiently. Finally, its aluminium back plate is reusable, making it the perfect choice of replacement for your old or worn pads.
Available in both internally and externally routed options, this replacement cartridge is perfect for helping you repair and maintain your Brand-X Ascend dropper seat post. Each cartridge is unique to each travel option and cartridges are not cross-compatible, so it is important to ensure that you marry up the correct cartridge to the routing and the travel of your Brand-X Ascend post. Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide. Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.
These replacement pads are perfect for breathing new life into your Look Activ Trail Grip mountain bike pedals. They feature a grippy Vibram Rubber compound and each pack includes replacement pads, body plates and grip tape for quick and easy installation. Available in a variety of colour options, these are a great way to customise your existing pedals or to replace old or worn-out existing pads. Genuine Look spare parts. Manufacturer's Part Numbers: PEPL24656 Multi Camo One Size Pair PEPL24655 Red Red One Size Pair PEPL24653 Black Black One Size Pair PEPL24654 Green Lime One Size Pair
These replacement pads are perfect for breathing new life into your Look City Grip urban bike pedals. They feature a grippy Vibram Rubber compound and each pack includes replacement pads, body plates and grip tape for quick and easy installation. Available in a variety of colour options, these are a great way to customise your existing pedals or to replace old or worn-out existing pads. Genuine Look spare parts. Manufacturer's Part Number: PEPL24659 Red Red One Size Pair PEPL24660 Multi Camo One Size Pair PEPL24657 Black Black One Size Pair PEPL24658 Green Lime One Size Pair
This axle kit contains high-quality replacement Nukeproof parts. Compatible with Nukeproof Urchin pedals only. A guide for rebuilding your Nukeproof flat pedal can be found here.
Easy to install, this model features a durable alloy construction which makes it immensely tough at handling all the abuse that comes with off-road riding. Perfect for replacing your old or worn-out existing cartridge, this version is an ideal choice of upgrade for breathing new life back into your dropper.
Fits 7iDP Youth M1 helmet only.
Whether your original derailleur hanger has broken, or you simply want an extra one to keep as a spare, this model is designed for reliable performance. It features a completely re-engineered design that boasts a 100% alloy construction without any plastic, allowing you to benefit from maximum durability. Pilo Engineering has also equipped this version with an anodised coating for additional protection against corrosion during wet riding conditions. Compatible with a wide range of bike manufacturer's listed below, this is an easy to install replacement and it comes complete with mounting hardware. Compatibility This replacement derailleur hanger is compatible with the following bike models: Canyon: 2021 Exceed CF SLX M075-01 Exceed CF SLX 8 Exceed CF SLX 9 2021 Exceed CF M076-01 Exceed CF 5 Exceed CF 5 WMN Exceed CF 6 Exceed CF 7 Exceed CF 7 WMN 2021 Exceed CFR M112-01 Exceed CFR LTD Exceed CFR Team 2021 Lux CF SLX M063-01 Lux CF SLX Frameset MVDP 2021 Spectral CF M121-01 Spectral 29 CF 7 Spectral 29 CF 8 Spectral 29 CF 9 Spectral 29 LTD Orbea: 2021 Oiz OMX 2021 Alma OMR 2021 Alma OMX Santa Cruz: 2021 5010 V4 Specialized: 2021 Stumpjumper Evo Transition: 2021 Patrol Trek: 2020 2021 Procaliber 9.7 2020 2021 Fuel EX 9.9 ABP 2020 2021 Rail 9.8 2021 Powerfly FS 4 2021 Rail 9.7 2021 Rail 7 2021 Rail 9.9 XTR 2021 Powerfly FS 9 Equipped 2021 Rail 9.9 X01 AXS 2022 Session 8 GX, Session 9 X01, Session 9.9 29 er Whyte: 2021 E-150 S 29ER, E-150 RS 29ER, G-180 S, G-180 RS, G-180 RS 29ER, G-180 WORKS 29ER, T-160 S, T-160 RS Yeti: 2021 ACR YT: 2021 Capra MK3 Manufacturer's Part Number: D798
Genuine replacement optics for your Gloworm Light. Choose from either: Spot, Flood or Wide for the X2/XS G1.0, Spot, Wide or Honeycomb for the X2/XS/XSV G2.0 or Spot/Spot, Spot/Wide or Wide/Wide for the CX/Alpha. SPOT (96% Efficient/FWHM 17 degrees): The spot optic provides the narrowest beam. It is also the most efficient, allowing the greatest light output. It can be used in conjunction with another spot optic to gain the greatest possible output and therefore beam distance. This configuration is best used on the helmet to see down the trail or to spot the exit of a turn. Alternatively, the spot could be paired with another optic type from an alternative light pattern. FLOOD (84% Efficient/FWHM 25 degrees): For a smooth diffused light pattern the Flood optic is the best option. It takes the light and smooths the light across the width of the beam, making it slightly easier on the eye and creating even light from left to right. A pair of Flood optics would provide a wall of smooth light, however in doing so a significant amount of light intensity would be lost compared to a pair of spot optics. The flood is best used in tandem with a spot or wide optic. WIDE (87% Efficient/FWHM 40 degrees): This optic provides a wide rectangular beam, it utilises the light output to provide more peripheral light and less light in the vertical axis. While not as optically efficient as the Spot Optic, it provides very good output for a wide-angle optic. Two wide optics can be paired as a great option for use on the road, however, when paired with either a flood or spot optic an effective hybrid beam can be created. HONEYCOMB (87% Efficient/FWHM 30 degrees): Designed for use with the XSV, the Honeycomb Optic is used to gain a smooth diffused light pattern when used with 2 spot optics or other honeycomb optics. It takes the light and smooths it across the width of the beam, making it slightly easier on the eye and creating a more even transition from the bright beam centre.
Genuine replacement optics for your Gloworm XSV Light. Choose from either: Spot, Flood or Wide for the X2/XS G1.0, Spot, Wide or Honeycomb for the X2/XS/XSV G2.0 or Spot/Spot, Spot/Wide or Wide/Wide for the CX/Alpha. SPOT (96% Efficient/FWHM 17 degrees): The spot optic provides the narrowest beam. It is also the most efficient, allowing the greatest light output. It can be used in conjunction with another spot optic to gain the greatest possible output and therefore beam distance. This configuration is best used on the helmet to see down the trail or to spot the exit of a turn. Alternatively, the spot could be paired with another optic type from an alternative light pattern. FLOOD (84% Efficient/FWHM 25 degrees): For a smooth diffused light pattern the Flood optic is the best option. It takes the light and smooths the light across the width of the beam, making it slightly easier on the eye and creating even light from left to right. A pair of Flood optics would provide a wall of smooth light, however in doing so a significant amount of light intensity would be lost compared to a pair of spot optics. The flood is best used in tandem with a spot or wide optic. WIDE (87% Efficient/FWHM 40 degrees): This optic provides a wide rectangular beam, it utilises the light output to provide more peripheral light and less light in the vertical axis. While not as optically efficient as the Spot Optic, it provides very good output for a wide-angle optic. Two wide optics can be paired as a great option for use on the road, however, when paired with either a flood or spot optic an effective hybrid beam can be created. HONEYCOMB (87% Efficient/FWHM 30 degrees): Designed for use with the XSV, the Honeycomb Optic is used to gain a smooth diffused light pattern when used with 2 spot optics or other honeycomb optics. It takes the light and smooths it across the width of the beam, making it slightly easier on the eye and creating a more even transition from the bright beam centre.
Genuine replacement Spot/Wide, Spot/Spot or Wide/Wide optics for your Gloworm CX/Alpha Light. SPOT (96% Efficient/FWHM 17 degrees): The spot optic provides the narrowest beam. It is also the most efficient, allowing the greatest light output. It can be used in conjunction with another spot optic to gain the greatest possible output and therefore beam distance. This configuration is best used on the helmet to see down the trail or to spot the exit of a turn. Alternatively, the spot could be paired with another optic type from an alternative light pattern. WIDE (87% Efficient/FWHM 40 degrees): This optic provides a wide rectangular beam, it utilises the light output to provide more peripheral light and less light in the vertical axis. While not as optically efficient as the Spot Optic, it provides very good output for a wide-angle optic. Two wide optics can be paired as a great option for use on the road, however, when paired with either a flood or spot optic an effective hybrid beam can be created.
This USB cable is a genuine Ravemen spare part.