Whether you're riding for the joy of it or pushing for the top spot on the podium, you get the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.
The inner cables also run through slick-lube liners to ensure this kit provides you with fine brake modulation and consistent braking power. Features: Pro level polished cables combined with slick-lube inner liners Kevlar reinforced housing Kit includes long housing and cables to ensure compatibility with large frames or mechanical disc brakes All parts needed for a complete brake cable and housing install Technologies: KEB-SL Outer Cable: This high-quality outer cable consists of linear strands that are Kevlar-reinforced, and that wrap around a slick-lube liner. A major performance upgrade to coiled steel, this compressionless housing starts with a similar construction to Jagwire's LEX shift housing that reduces weight by 30%. The woven Kevlar® layer gives the housing the strength and flexibility that is necessary for braking applications. STS-PS Cables: These pre-stretched, slick stainless steel spiral-bound cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes by riders looking for ultimate performance.
Steerers and handlebars made of composite materials can easily be compromised by poor clamp design. To assure the integrity of the ARX clamp interface, we perform our own tests that go way beyond the demands of CEN standards. We even tested this new stem’s compatibility with other brands of handlebars and it passed with flying colours. ARX PRO is made of Al 2010 and has stainless-steel bolts. PRO offers an ideal balance to riders who insist on top-class performance at the keenest price. This group typically includes many amateurs who purchase their own equipment. PRO components often employ traditional materials such as Al 7075 and Al 6061 alloys to contain fabrication costs. But like all 3T products, they benefit from the 3T Intelligent Production Lifecycle, assuring right-first-time design and quality, at prices that meet the needs of today’s discriminating bike riders. Count on PRO components to perform to the highest levels.
Natural Pedalling Position with Secure Engagement With six degrees of float allowing a more natural pedalling position, LifeLine Road Cleats provide a precise and secure engagement for confidence in the sprints. Simple to disengage from the pedal and made from a highly durable plastic to keep wear to a minimum, these cleats include all necessary bolts and inserts needed to fit them to your shoes.
Whether you're riding for the fun of it or pushing for the top spot on the podium, the Look Keo 2 Max Carbon pedals give you the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max Carbon pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max Carbon pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max Carbon pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Alternative Cleat Float Options: Black Cleats: 0 degrees; Red Cleats: 9 degrees (both alternative versions sold separately)
The middle-weight tubes in the Maxxis line are targeted to all disciplines of riding.
The top section of the bar features an ovalized profile for increased comfort. Manufactured from 6061 double butted aluminium with a shot peened finish for enhanced fatigue resistance and durability. An anodized black finish with subtle graphics provides an understated stealthy appearance. Please Note: These bars have a measurement of 42cm (centre to centre at the end) and at the hoods it`s 41cm.
With the Racing Classic Bars 100mm reach and 138mm drop, you’ll be able to get into the optimum aero race position to maximise your effort. Plus, when you’re climbing, there are recessed channels for the cables, meaning increased comfort when your hands are on the tops. Brand-X has also given the Racing Classic Bars a black anodised finish for an understated, stealthy look which will enhance any road bike. Also, Centre markings help you to set up the bar position in the stem easily.
Utilising years of experience in the motorcycling industry, HJC have taken their first steps into the world of cycling helmets and have certainly set the benchmark with the Furion, an aero road lid ready to keep you safe as you get up to speed. The aerodynamic design optimises both speed and airflow, the Venturi Dynamics technology balances air resistant forces and ventilation to deliver performance at both slow and fast speeds. If that isn’t enough to keep you cool when you decide to pick up the pace and break away from the peloton, the Furion is able to call upon an exhaust ventilation function and 15 ventilations to maximise air intake to the head. Helping you avoid sweat, there really are no excuses for not setting the pace and attacking off the front of the peloton. Offering a 3D fit system and an extremely lightweight feel, the Furion certainly oozes class. Wind tunnel tested to ensure nothing but perfection when pulling it on, HJC have also bound the EPS liner together with the outer polycarbonate shell for an in-mould construction. Inhaling air through the frontal intake vent and circulating it to exit via the exhaust vent, staying cool when the competition starts to wilt certainly gives you the upper hand. With optimal ventilation and technology tested to the very finest detail, the HJC Furion certainly provides a leading light on the road.
All Round Performance and Comfort The Brand-X Road Bike is our entry level road bike designed to get you out eating up the miles and enjoying the scenery wherever you are. The Brand-X Road frame is designed for all-around performance and comfort. A good selection of spacers allows for plenty of adjustment between an upright position, for endurance riding and a lower more performance position, for shorter faster rides. Shimano Tourney 2x7 Speed Drivetrain Efficient and Reliable The Shimano 2x7 speed tourney drivetrain is the perfect combination of performance and durability, ensuring reliable shifting whatever the conditions. Pedalling you through these gears is a set of forged alloy double cranks, with their forged alloy arms they are not only strong but light. Modern 25c Tyre Width for Grip and Fast Rolling The large 700x25c wheels offer great strength and are more than capable of withstanding the city roads with their potholes as well as gripping all year round with the added width of 25c. Built, Tested and Tuned Each bike is fully built, tested and tuned by Wiggle's team of qualified bike mechanics to ensure you're bike arrives in perfect condition. To find out which size fits you click on the size guide tab above. Note: Manufacturer may reserve the right to change the specification of that listed or shown on this page.
Simple to use Auto Zero: every time you stop pedalling for 3 seconds or more your power2max "re-zeros", no need to re-zero manually. No cadence magnet needed: you dont need to install a cadence magnet on your bike. Your power2max calculates cadence precisely using its internal accelerometer. Battery change: when the time come to change your battery - after 300 to 400 hours of use (6,000 to 12,000km) - you can do it yourself. ±2% Precision Power2max power meters deliver state of the art data: they achieve an accuracy of ±2% or better including all environmental influences. Power2max power meters achieves this accuracy through a refined design and high quality manufacturing processes. Power2max manufactures the power meters in Germany with the highest quality production standards. ANT+ Power2max power meters use the ANT+ standard to transmit data wirelessly to your bike computer. The ANT+ standard guarantees reliable transmission and offers a large number of bike computers to choose from. Bluetooth ready Power2max FSA power meters are Bluetooth ready and can be upgraded to transmit the data wirelessly not only with ANT+, but also via Bluetooth communication (with purchase of firmware upgrade). Upgradeable Power2max FSA power meters can be upgraded to have the software feature of left-right balance
A great way to upgrade the performance and looks of your mountain bike (MTB), the Hope road skewers are made from high quality materials and will securely hold your wheels in place. These stainless steel rods and CNC machined end nuts are designed to stay stiff and durable under high-intensity riding.