Frame Skinz, Clear is specifically designed to discreetly provide bomb-proof frame protection for your bike's exposed areas against impact and wear, commonly picked up on the trails and in transit. The seventeen patches can be used independently or in harmony, letting you decide what areas to protect.FeaturesHigh performance and eco savvy clip, clout, clobber, chip, chafe, crash protection for your precious bike bits,Universal fitting: suitable for alloy and carbon frames,Super clean and easy installation and removal,Exceptional clarity and stylish designs,Proudly designed and manufactured in the UK; the land of muck.MaterialWe spent forever (and a bit longer), sourcing the right materials but we are happy as pigs in (muck) with the end product and hope you will be too. Using materials normally used on Motocross, Karts, ATVs, Snowmobiles and Jet Skis with a strong, clear pressure-sensitive adhesive that is super clean to apply and remove, the end result is a 300 micron composite vinyl (that's metric by the way), that offers outstanding performance and crystal clear graphics while also being pliable enough to conform to the endless contours of each and every bike frame. EcoDid we say the vinyl is Cadmium-free? WTF is that, you may ask. Straight from https://www.greenfacts.org/en/cadmium/ Normally found in PVC materials, Cadmium is toxic to plants, animals and micro-organisms. Being a simple chemical element, Cadmium is persistent – it cannot be broken down into less toxic substances in the environment. Basically, it's not very nice so we got rid of it. If that's not enough, with graphics printed using eco-friendly ink and sandwiched in-between the vinyl layers for added protection, the end product is bundled inside its dedicated recycled cardboard packaging, keeping it safe while it heads to you. Contents1 x top tube/down tube protector,2 x top tube/down tube protector joints,8 x top tube/down tube/seat tube patches,2 x stay protectors,4 x cable rub patches.FitThe 17 patches, ranging from 32 x 28mm to 330 x 65mm, are compatible with most bikes... not just mountain bikes.
Stay Skinz, Clear is specifically designed to discreetly provide bomb-proof protection for your seat and chain stays against impact and wear, commonly picked up on the trails and in transit. FeaturesHigh performance and eco savvy clip, clout, clobber, chip, chafe, crash protection for your precious bike bits,Universal fitting: suitable for alloy and carbon frames,Super clean and easy installation and removal,Exceptional clarity and stylish designs,Proudly designed and manufactured in the UK; the land of muck.MaterialWe spent forever (and a bit longer), sourcing the right materials but we are happy as pigs in (muck) with the end product and hope you will be too. Using materials normally used on Motocross, Karts, ATVs, Snowmobiles and Jet Skis with a strong, clear pressure-sensitive adhesive that is super clean to apply and remove, the end result is a 300 micron composite vinyl (that's metric by the way), that offers outstanding performance and crystal clear graphics while also being pliable enough to conform to the endless contours of each and every bike frame. EcoDid we say the vinyl is Cadmium-free? WTF is that, you may ask. Straight from https://www.greenfacts.org/en/cadmium/ Normally found in PVC materials, Cadmium is toxic to plants, animals and micro-organisms. Being a simple chemical element, Cadmium is persistent – it cannot be broken down into less toxic substances in the environment. Basically, it's not very nice so we got rid of it. If that's not enough, with graphics printed using eco-friendly ink and sandwiched in-between the vinyl layers for added protection, the end product is bundled inside its dedicated recycled cardboard packaging, keeping it safe while it heads to you. Contents,2 x seat stay protectors,2 x chain stay protectors.FitThe patches are compatible with most seat and chain stays.
A lightweight, open sole cycle overshoe, designed for use with a variety of footwear.Key Features:Durable - Kevlar heel and toe for wear resistance,Easy fitting - Rear pull loop,Visibility - Reflective detailing for added visibility in low light conditions.
A rugged and durable cycle overshoe, featuring bright LED light in the heel and stealth reflectivity for increased visibility in low light.Key Features:Integrated LED - 4 Lumen LED visible for over 500m,Durable - Kevlar heel and toe for wear resistance,Visibility - Reflective detailing for added visibility in low light conditions.
A lightweight, open sole cycle overshoe, featuring a bright LED light in the heel for increased visibility in low light.Key Features:Integrated LED - 4 Lumen LED visible for over 500m,Durable - Kevlar heel and toe for wear resistance,Open Underfoot - Suitable for various types of footwear.
An Overshoe Ready for Long, Hard RidesWet and cold feet while riding can be the worst, use our All Weather Open Sole Cycle Overshoes to keep your shoes and feet dry and protected during wind, rain, and puddles. They're an ideal choice when you might encounter wet weather whilst commuting or road cycling.Designed with the Cyclist in MindThis lightweight, All Weather Open Sole Overshoe is designed for use with road cycle shoes to keep your feet dry and protected. Featuring a Kevlar® heel and toe for durability, reflective detailing for added visibility in low light, and a rear zipper with pull loop for quick on and off.
Close fitting inner gloves in fine Merino wool for increased comfort. Ideally worn under our range of waterproof gloves to give added insulation.Key Features:Extra comfort and moisture control – High Merino Wool content,Added warmth and protection from full finger design,Breathability – Fabric wicks sweat away,Base layer thermal insulation – Close-fitting design allows them to be worn under another glove.
A lightweight, single layer, fleece glove offering permanent water repellency, insulation and comfort. Ideal for everyday use in a variety of weather conditions.Key Features:Water Repellent - nano technology provides lightweight permanent water repellent performance,Grip and control - Silicone printed palm and fingers for firm handling and added grip,Touchscreen Friendly - Feature on index finger and thumb,Quick-drying - nano fabric dries extremely fast,Pull on tab - making it easier to get on.
The original, 100% waterproof, windproof & breathable ankle length sock featuring Hydrostop. Perfect for use in a wide variety of weather conditions.Key Features:Waterproof - three layer construction for warmth, durability and waterproofing,Comfort - Merino wool lining for moisture control, insulation and comfort,Hydrostop - Reduces water ingress.
A rugged, lightweight and technical waterproof cycling glove. Offering a balance of warmth and breathability. Perfect for a variety of cycling disciplines and weather conditions.Key Features:Waterproof - three layer construction for warmth, durability and waterproofing,Enhanced control - Zero liner movement provides excellent control,Visibility - reflective material for visibility in low light conditions,Comfort - foam pressure point padding,Thumb Wiper - PU suede wiper for a variety of uses.
Revolutionary Waterproof Protection in Any WeatherA rugged and dependable all-around glove, the Waterproof All Weather Glove with Fusion Control™ is designed to keep you dry and warm during any kind of wet weather. Wet and cold hands can lead to all sorts of issues in the outdoors. Blisters, numbness, and worse can make for an unpleasant experience. Sealskinz Waterproof All Weather Gloves with Fusion Control™ will keep you warm, dry, and protected in the worst wet weather.Ideal for a Wide Range of ActivitiesIdeal for activities where you need the utmost dexterity and protection. It’s the perfect choice for spring skiing, outdoor photography, rainy commutes, and wet weather cyclingRevolutionary Fusion Control™ TechnologyEquipped with our patented, 'first-of-it's-kind' Sealskinz-Fusion-Control Fusion Control™ technology, these gloves are a workhorse combination of unique breathability and unmatched dexterity in a 100% water-and-windproof glove. Discover precise control and zero risk of liner slippage or pull out.Extremely BreathableParticularly noteworthy is the unmatched breathability of the hydrophilic waterproof membrane to release perspiration steam and warm air from inside the glove. This creates a high level of comfort for the wearer, improved with an innovative 'open mesh' bonding process that allows for maximum moisture transfer out of the glove while still keeping the three layers secured as one.Unmatched Dexterity in a Waterproof GloveThe unique bonding process sandwiches a 100% waterproof hydrophilic membrane securely between a Merino wool inner and a softshell outer shell, allowing for a closer-to-skin fit that provides you with high dexterity and range of movement as well as a significant improvement in grip.Thoughtfully DesignedThe smooth softshell outer shell is soft and durable, while the AX Suede™ palm provides an extra layer of control. Combined with a merino wool inner liner and a velcro closure, this glove provides the right amount of stretch while keeping you dry and comfortable.
A rugged, lightweight and technical waterproof glove. Offering a balance of warmth and breathability. Perfect for a variety of activities and weather conditions.Key Features:Waterproof - three layer construction for warmth, durability and waterproofing,Enhanced control - Zero liner movement provides excellent control,Dexterity - pre curved fingers for greater control.