NS Bikes Define AL 160 Suspension BikeThe Define AL 160 Suspension Bike from NS Bikes is a superb all-mountain enduro warrior that's ideal for riding anywhere on the mountainside. It features an alloy frame with 160mm-travel front and rear, RockShox 35 Gold forks, a Marzocchi Bomber rear shock and a Shimano Deore M6100 12-Speed groupset with a wide-ranging 11-51-Tooth cassette and hydraulic disc brakes. Plus, it rolls upon 27.5" Octane One Solar rims wrapped in Schwalbe BikePark tyres, giving you performance and control for riding any trail with confidence.RockShox 35 Gold Forks and Marzocchi Bomber Rear ShockEquipped with RockShox 35 Gold forks and a Marzocchi Bomber CR rear shock, this all-mountain warrior makes sure you stay stable and upright anywhere on the mountain. Ensuring you blast up and down the mountain with the greatest control, this suspension setup has 160mm of travel at the front and 160mm at the rear, providing you with an ultra-smooth performance that's ideal for riding rough terrain in wet and slippy or dry and dusty conditions. Shimano Deore M6100 12-Speed Groupset and Hydraulic Disc BrakesPowering you with the greatest efficiency and pace is a 12-Speed Shimano Deore M6100 drivetrain. This bike's gearset provides a super-smooth, precise and satisfying shift as you click through the gear range. Plus, it's equipped with Shimano MT410 hydraulic disc brakes, giving you a powerful and dependable all-weather braking performance. Octane One Solar Rims and Schwalbe BikePark TyresThis exceptional off-roader rolls with Octane One Solar 27.5” rims to give you superb rolling speeds and agility suited to modern enduro racing. Plus, it has Schwalbe Dirt Reynolds BikePark tyres that are Tubeless Ready and feature 2.4" wide casing for the greatest rolling speed, grip and reliability. The NS Bikes Define AL 160 Suspension Bike provides you with power, agility and control and gives you the confidence to push yourself towards the pinnacle of the podium. Features: Frame: NS Bikes Define AL w/ 160mm travel, AL6061-T6 + AL6066-T6, custom hydroformed tubes Rear shock: Marzocchi Bomber CR Trunnion 205x65, S-400, M-450, L-500 lbs/in Forks: Rock Shox 35 Gold RL 160mm travel, 15x110mm Boost, 1.5 tapered steerer tube, 37mm offset Headset: GW integrated tapered IS42/IS52, sealed bearings Stem: NS Bikes Tone 45mm, 35 Handlebar: NS Bikes Bar 35, 780mm, 20mm rise Grips: NS Bikes Hold Fast supersoft Seatpost: Kind Shox Rage i internal S-125, M-150, L-170mm, 31,6mm Saddle: WTB Volt Medium Steel SL Front brake: Shimano MT410, 200mm Rear brake: Shimano MT410, 180mm Rims: Octane One Solar 27.5”, 32h, tubeless ready Spokes: Spokes w/14mm nipples Front hub: NS Bikes 110x15mm Boost (sealed bearings) Rear hub: NS Bikes 148x12mm Boost (sealed bearings) Tyres: front / rearSchwalbe Dirt Reynolds BikePark 27.5x2.4 / Schwalbe Dirt Reynolds BikePark 27.5x2.4 Crankset: Shimano Deore FC-MT5101 170mm 34t Bottom bracket: Shimano BSA 73mm Chain: Shimano Deore M6100, 12-Speed Derailleur: Shimano Deore M6100, 12-Speed Shifters: Shimano Deore M6100, 12-Speed Cassette: Sunrace CSMZ800, 11-51T 12-Speed Weight: 15.1kgEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Buy NS Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
NS Bikes Define AL 160 Suspension BikeThe Define AL 160 Suspension Bike from NS Bikes is a superb all-mountain enduro warrior that's ideal for riding anywhere on the mountainside. It features an alloy frame with 160mm-travel front and rear, RockShox 35 Gold forks, a Marzocchi Bomber rear shock and a Shimano Deore M6100 12-Speed groupset with a wide-ranging 11-51-Tooth cassette and hydraulic disc brakes. Plus, it rolls upon 27.5" Octane One Solar rims wrapped in Schwalbe BikePark tyres, giving you performance and control for riding any trail with confidence.RockShox 35 Gold Forks and Marzocchi Bomber Rear ShockEquipped with RockShox 35 Gold forks and a Marzocchi Bomber CR rear shock, this all-mountain warrior makes sure you stay stable and upright anywhere on the mountain. Ensuring you blast up and down the mountain with the greatest control, this suspension setup has 160mm of travel at the front and 160mm at the rear, providing you with an ultra-smooth performance that's ideal for riding rough terrain in wet and slippy or dry and dusty conditions. Shimano Deore M6100 12-Speed Groupset and Hydraulic Disc BrakesPowering you with the greatest efficiency and pace is a 12-Speed Shimano Deore M6100 drivetrain. This bike's gearset provides a super-smooth, precise and satisfying shift as you click through the gear range. Plus, it's equipped with Shimano MT410 hydraulic disc brakes, giving you a powerful and dependable all-weather braking performance. Octane One Solar Rims and Schwalbe BikePark TyresThis exceptional off-roader rolls with Octane One Solar 27.5” rims to give you superb rolling speeds and agility suited to modern enduro racing. Plus, it has Schwalbe Dirt Reynolds BikePark tyres that are Tubeless Ready and feature 2.4" wide casing for the greatest rolling speed, grip and reliability. The NS Bikes Define AL 160 Suspension Bike provides you with power, agility and control and gives you the confidence to push yourself towards the pinnacle of the podium. Features: Frame: NS Bikes Define AL w/ 160mm travel, AL6061-T6 + AL6066-T6, custom hydroformed tubes Rear shock: Marzocchi Bomber CR Trunnion 205x65, S-400, M-450, L-500 lbs/in Forks: Rock Shox 35 Gold RL 160mm travel, 15x110mm Boost, 1.5 tapered steerer tube, 37mm offset Headset: GW integrated tapered IS42/IS52, sealed bearings Stem: NS Bikes Tone 45mm, 35 Handlebar: NS Bikes Bar 35, 780mm, 20mm rise Grips: NS Bikes Hold Fast supersoft Seatpost: Kind Shox Rage i internal S-125, M-150, L-170mm, 31,6mm Saddle: WTB Volt Medium Steel SL Front brake: Shimano MT410, 200mm Rear brake: Shimano MT410, 180mm Rims: Octane One Solar 27.5”, 32h, tubeless ready Spokes: Spokes w/14mm nipples Front hub: NS Bikes 110x15mm Boost (sealed bearings) Rear hub: NS Bikes 148x12mm Boost (sealed bearings) Tyres: front / rearSchwalbe Dirt Reynolds BikePark 27.5x2.4 / Schwalbe Dirt Reynolds BikePark 27.5x2.4 Crankset: Shimano Deore FC-MT5101 170mm 34t Bottom bracket: Shimano BSA 73mm Chain: Shimano Deore M6100, 12-Speed Derailleur: Shimano Deore M6100, 12-Speed Shifters: Shimano Deore M6100, 12-Speed Cassette: Sunrace CSMZ800, 11-51T 12-Speed Weight: 15.1kgEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Buy NS Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Commencal Meta SX Essential Suspension BikeAttacking descents, weaving through trees and landing huge jumps, modern enduro riding demands a ride that can handle anything and that’s exactly what the Meta SX Essential mountain bike (MTB) offers you. Its triple butted alloy frame is backed up by Fox Performance suspension, a Shimano SLX 1x12 speed drivetrain and SLX 4-Piston hydraulic disc brakes.DT Swiss Rims with Maxxis Assegai and DHR TyresCommencal has also fitted it with 27.5"/29" DT Swiss E532 rims, which are wrapped in Maxxis Assegai and DHR II tyres. This stylish full suspension enduro race bike is ideal for off-piste all-mountain exploring, alpine freeride routes and the rigours of long-distance enduro race events.Mullet Wheel Standard - 29" Front Wheel and 27.5" Rear WheelCommencal has been working on 29/27 ‘Mullet’ bikes and frames for many years now with their different downhill (DH) teams. This work has allowed Commencal to understand that to transform a regular bike with the same sized wheels into a bike with different sized wheels, it isn’t effective to just throw a 27-inch wheel on the back. The geometry and kinematics of the bike must be completely reworked, and it is thanks to this experience that we are now able to present the most successful version of the META V4 they've ever produced, the Meta SX.Equipping this Meta SX with different sized 29/27-inch wheels is not the result of a trend that Commencal is following. Quite simply, this way the bike is much more balanced, specifically relating to grip on the front and back - the large 29-inch wheel on the front allows more confidence and rolling capacity whilst the 27.5-inch rear wheel offers more manoeuvrability and responsiveness.The result is a bike that is more agile and easier on the steeps, more efficient under braking and more dynamic when pushing hard.Once again, Commencal's choice to work with Aluminium has allowed them to accompany this change in wheel size with an adjustment of the geometry. A shorter 10mm reach, a straightened steerer angle and extended (10mm) chainstays mean that the rider is naturally repositioned in the centre of the bike and will therefore be more precise and agile in their technique.Lively, Progressive and Stable Enduro Optimised SuspensionUndoubtedly, one of the points that have changed the most is the way the suspension works. Apart from the kinematics, which have been reworked to provide more liveliness, Commencal made a point of managing the stiffness of the rear triangle. Through new double row Enduro Bearings, eliminating any deformation, the Meta SX frame offers perfect deformation/rigidity management to provide grip, comfort, and performance.Easy Adjustable Flip Chip Suspension SystemIn addition to all this in-depth work, as on their Meta Power TR and Meta TR models, Commencal now offers a "Flip Chip" on the shock extension in order to be able to better adjust the geometry, and therefore fit with your style. This system also means you can adapt the height of the bottom bracket as well as the steerer and saddle angles within seconds. Depending on your preferences, you can have the choice between a dynamic bike that’s perfect for big pedalling trips, or a more progressive version that is ideal for days in the bike park or on more committed trails.Stylish Welds and Convenient Cable RoutingThe welds have been the subject of meticulous work to reduce them as much as possible without affecting the solidity of the frame. The cable routing is neat for easier maintenance, the cables being easily accessible in the down tube, while grommets are placed at the ends to give perfect support and prevent penetration of water and mud. Installing a bottle cage has also been made easy.Features: Frame: Meta SX, 160mm rear travel, 29''-27.5'', Alloy 6066, triple butted tubes, T4, T6. Enduro bearings Fork: Fox Suspension 38 Performance, 170mm Travel, 29", Fit Grip damper, 3 positions, rebound, Boost (15x110mm), 44mm offset, 2 Tokens Rear Shock: Fox Suspension Float X Performance, 230x62.5mm, 2-position lever, rebound adjust Headset: ACROS ZS44/ZS56, Alloy cups, sealed bearings Stem: Ride Alpha Freeride 40, 40mm extension, 31.8 mm Handlebar: Ride Alpha R20 760 on Small; Ride Alpha R27 780mm on Medium and Large; Ride Alpha R27 800 on X-Large. 31.8 mm, 760 mm width, 20 mm rise, Alloy 6061 on S - 31.8 mm, 780 mm width, 27 mm rise, Alloy 6061 on M / L - 31.8 mm, 800 mm width, 27 mm rise, Alloy 6061 on XL Grips: ODI Elite Motion, Soft pro compound, single clamp, black Brakes: Shifters: Rear Derailleur: Shimano SLX 1x12-Speed Bottom Bracket: Shimano BB71-41A, Pressfit Crankset: Shimano SLX Boost, 170mm crank arms, Chainring: Shimano SLX, 32T, Dynamic Chain Engagement + Technology Chain: Shimano SLX, 12-Speed Cassette: Shimano SLX, 12-Speed, 10-51T Rims: DT Swiss E532 29"/27.5" Hubs: Front: Formula DC-711 32h, sealed bearings; Rear: Formula DCL-148A, 32h, sealed bearings Spokes/Nipples: SAPIM Leader, J-Bend 2.0 mm, stainless, with Nylok, black Tyres: Front: Maxxis Assegai 29" x 2.5", WT, 3C MaxxTerra, EXO, Tubeless Ready; Rear: Maxxis DHR II 27.5" x 2.4", WT, 3C MaxxTerra, EXO+, Tubeless Ready Seatpost: KS Rage-I 34.9 mm, travel: 125 mm on S, 150 mm on M, 170 mm on L, 190 mm on XL, SouthPaw alloy remote Saddle: Fizik Terra Alpaca X5, 145mm width, S-alloy rails Accessories: Downtube protector, chainstay protector, seatstay protectorEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Commencal Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mezzer Expert Suspension ForkThis enduro suspesnion fork features 37mm stanchions that are constructed from 7000 series aluminium and Reverse Arch technology, using the same chassis as Manitou's Mezzer Pro suspension fork. This allows it to deliver exceptional stiffness and strength, while also being incredibly lightweight at only 2030g (27.5” option). As a result, the Expert is the second lightest fork in the Enduro category, second only to the Mezzer Pro of course. Another highlight is it comes race-ready with an Expert Air air spring with Incremental Volume Adjust (IVA) for an impressively smooth feel as you charge across challenging terrain conditions. It also offers a wide range of adjustment features from its Variable Terrain Tune (VTT) damper that can easily be tweaked to suit any terrain thanks to its six positions. With adjustable Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock), this suspension fork is the smart choice for anyone looking to dive into the Enduro Fork market.Enduro Fork with Expert Air SpringExpert Air is derived from Manitou's Dorado Air system and features a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This valve is activated only when the pump is threaded completely onto the valve. This gives the spring rate a smooth and consistent feel without any flat or dead spots in the stroke.Six Position Variable Terrain Tune (VTT) DamperAdjusted through a single external compression adjuster, both high-speed and low-speed damping characteristics are changed simultaneously when turning the knob. The damper features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. In positions 1 and 2 there is an open flow path through the compression damper. In positions 3-6, the adjustable shim stack comes into contact with the piston, increasing platform force. This design provides a wide tuning range that combines the benefits of a low-speed platform and a high-speed progressive tune that can suit any terrain through 6 positions.Hexlock SL AxleManitou's patented hex axle locks the lower legs in place, eliminating rotation around the axle providing unsurpassed stiffness in a lightweight tooled package.Features: Leg Material: 7000 Series Butted Wall Aluminium Crown Material: Forged Aluminium, Hollow Bore Leg Diameter: 37mm Use: Enduro Axle Size: 15x110mm Hexlock Steerer Diameter: 1 1/8-1.5" tapered Air Spring: Expert Air with Incremental Volume Adjust (IVA) Compression Damping: Six Position Variable Terrain Tune Rebound Damping: Open Cartridge adjustable TPC Adjustments: Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock) Offset: 37/44OS (27.5" Option); 44/51OS (29" Option) Ride Height: 534-574mm (27.5" Option); 554-594mm (29" Option) Travel: Multiple options available. Internally adjustable in 10mm increments Brake Post Mount: 180mm (223mm Max) Max Tyre Size: 69mm with Fender 74mm Without Optional: Fender Kit (sold separately) E-Pac: Yes, 44OS 140-180 (27.5" Option); 51OS 140-160mm (29" Option) Weight: 2030g (27.5" Option); 2062g (29" Option)Technologies: 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness. Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self contained spacers. You'll never lose a volume spacer again. VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built up air within the lower legs to keep things butter smooth between service intervals.Manufacturer's Part Numbers: 191-36964-A101 Black 29" x 180mm 44mm 191-37137-A101 Black 27.5" x 180mm 37mm 191-36964-A103 Black 29" x 160mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 32 Float AX Factory Fit4 ForkPart of Fox Suspension's prestigious Factory Series, this gravel bike fork features a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Benefitting from a lightweight Float EVOL air spring, it provides smooth and consistent front end suspension as it effortlessly soaks up knocks and bumps on your travels. Another highlight is its adjustable FIT4 damper that allows you to dial-in your favourite settings and enjoy a more rider-tuned experience, wherever your next adventure takes you. Coming complete with a choice of travel options to choose from as well as disc brake rotor compatibility from 160mm up to 180mm, this is a gravel fork that's engineered for exploring.Explore the Route Less TravelledWith a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 AX delivers just enough tuneable travel to take the edge off of wherever your gravel adventures may lead you.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions—Open, Medium, and Firm—to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Gravel Axle Size: 12x100mm, Kabolt Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 Brake Rotor Compatibility: 160mm direct Post Mount, Up to 180mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. FIT4 Damper Adjustments: Three on-the-fly compression damping positions: Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks.Manufacturer's Part Numbers: 910-20-258 Black 700c 50mm Travel 910-20-256 Orange 700c 40mm TravelBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory Rear ShockCombining ultra-plush coil-like comfort with incredible damping expertise, this trail-ready mountain bike (MTB) rear shock brings new levels of control and performance to every terrain imaginable. Coming packed with many of Fox Suspension's proven technologies, this model is part of the renowned Factory Series and is equipped with a genuine Kashima coating for increased durability, smooth performance and an eye-catching finish. Boasting an updated chassis, damper and compression ratios, it's specially developed to exceed the demands of Factory-level riders.Air Spring Rear Shock with Variable Valve Control (VVC)Benefitting from the lightweight of its air spring and an unmatched level of tunability, this rear shock is ready for the rigours of modern trail riding. It's kitted out with high and low speed compression as well as high and low speed rebound adjustments, so you can fine-tune its suspension performance to match your riding style as well as the terrain conditions. Delivering a more rider-tuned feel, this version is also equipped with Fox Suspension's patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. The X2 changes everything, including the game. This award-winning, gravity-defying air shock holds nothing back, especially not you. With a laundry list of advanced features, the Fox Suspension Float x2 Factory Shock is ready to clean house.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psi Lever Actuated: Yes, 2-position climb lever Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX2 Factory 2 Position Adjust ShockReady for all-day epics on your favourite local trails, this mountain bike (MTB) rear shock features a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling on the most demanding of terrains. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.