These lightweight, strong BMX forks have a built in bearing race and a threadless 1-1/8" steertube, tapered at the headtube, with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: Tapered 1 1/8" - 1 1/2" Wheel Size: 20" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 800g (top cap included)
Stay Strong have collaborated with Avian to bring you these Versus carbon race forks. The Versus steerer tube is made of 4mm thick 7005 aluminum and features an M10 thread internal locking system to eliminate expander plugs & star nuts that often compromise strength. The aero carbon fibre legs are made of highly durable Toray fibre with 20mm alloy drop-outs. ###section### Product Specs Steerer Length: 170mm Wheel Size: 24" Material: Carbon Dropout Size: 20mm Offset: 32mm Weight: 21.8oz (with stem-lock & top cap)
From the renowned Stay Strong brand these lightweight, strong BMX forks have built in bearing race and a threadless tapered 1-1/8" steertube. ###section### Product Specs Steerer Length: 165mm Wheel Size: 24" Material: 100% 4130 heat treated Cro-mo Dropout Size: 20mm Offset: 31mm Weight: 870g (top cap included)
From the renowned Stay Strong brand these lightweight, strong BMX forks have built in bearing race and a threadless tapered 1-1/8" steertube. ###section### Product Specs Steerer Length: 172mm Wheel Size: 20" Material: 100% 4130 heat treated Cro-mo Dropout Size: 20mm Offset: 31mm Weight: 800g (top cap included)
Stay Strong Icon Tapered sealed AC bearing headset, 1-1/8" - 1.5". Designed for integrated headset frames (bearings sit directly inside the frame), 1-1/8" inch top and 1.5" bottom bearings, Stay Strong Icon branding on top cap and included preload bolt cap, 1-1/8th reducer bottom crown race included for rider wishing to run 'standard' 1-1/8" steerer tube forks in their tapered head tube frames. Weight: 73g (2.57oz)
Stay Strong Race DVSN Tapered sealed AC bearing headset, 1-1/8th - 1.5 inch. Designed for integrated headset frames (bearings sit directly inside the frame), 1-1/8th inch top and 1.5 inch bottom bearings, Stay Strong Race DVSN branding on top cap and included preload bolt cap, 1-1/8th reducer bottom crown race included for rider wishing to run 'standard' 1-1/8th inch steerer tube forks in their tapered head tube frames, Weight: 73g
Can be used with Stans ZTR rims to make them air tight or used as a light weight rim tape in any rimFeatures:10 yards of tape will do a estimated 10 rims60 yards of tape will do a estimated 60 rims.21mm width fits our following rims:ZTR OlympicZTR 355ZTR AlpineZTR CrestZTR Alpha 340Most road clincher rims.25mm width fits our following rims:ZTR 355 (26er, 650b, 29er)ZTR CrestZTR ArchZTR Flow.
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims