Box Two-Three Prime 9 X Wide MTB GroupsetAll set for hitting your favourite local trails, this groupset is available as a Single Shift option for electric mountain bikes (E-MTB) and a Multi Shift option for mountain bikes (MTB). Combining four trail-ready components from Box's Two and Three range, this model is simple to set up and allows you to upgrade your existing drivetrain for functional and intuitive shifting performance wherever your next adventure takes you.Did you know that you can mix and match Prime 9? Can't decide between the modern basics of Box Three and the long service life of Box Two? Well, you don't need to! With this pre-configured and pre-tested option, you'll receive a Box Three cassette paired to the durable Box Two derailleur, shifter and chain.Box Three Prime 9 Cassette 11-50TThe Box Three cassette draws from both of its Box One and Box Two siblings to create a sensible all-rounder. All cogs are stamped from steel. The main difference here versus Box Two is the use of additional weight-reducing holes on the cogs. This X-Wide version offers an 11-50T range.Features: Material: Aluminium, Cold Rolled Steel Finish: ED Black Gear Ratio: 11-50T Gears: 11 - 13 - 15 - 18 - 22 - 28 - 34 - 42 - 50 Box Component's Best All-Rounder Cassette Steel Stamped Cogs Ultra-Wide Ratio with Consistent Progression Prime 9 Technology Compatible with HG Freehub Bodies Weight: 660gBox Two Prime 9 Chain 126LThe Box Two chain's nickel plating adds both corrosion and wear-resistance. All Prime 9 chains have chamfered shifting edges, solid plates and solid pins to safeguard durability. The unique inner link spacing is engineered to grab those modern wide/narrow chainrings. Box chose to modernise the 9-speed platform due to the chain's spirited reputation.Features: Material: Hardened Alloy Steel Finish: Nickel Box Component's Most Durable Chain Nickel Plated Protection Durable Hardened Solid Pins Wide/Narrow Chainring Compatible Compatible with most 10,11, & 12-speed wide / narrow chain rings Prime 9 Technology Weight: 305gBox Two Prime 9 Shifter (Select Option)The Box Two shifter is the only shifter on the market (other than the Box One) that comes factory stock with a hinged clamp. Box Two is performance tier, so this shifter still maintains the durable cast aluminium top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift option (pull several gears at once) or single-shift shifter option (a sound choice for e-bikes). Please select the option from the menu to suit your bike.Features: Material: Glass Fibre / Nylon Composite, Steel, Aluminium Alloy Finish: Matte Onyx Hinged and Extruded Clamp 2 pc Pull Lever / Up to 3 Gears Per Shift* (Multi Shift Option) Die Cast Top Shell Fast Action Release Lever Prime 9 Technology Multi Shift Option Not Intended for E-Bike Use Single Shift Option Recommended for E-Bike Use Weight: 135gBox Two Prime 9 X-Wide Rear DerailleurThe Box Two Prime 9 Rear Derailleur is very similar to the Box One version however, to be more wallet-friendly, it offers a nonadjustable Tri-Pack Clutch, bushing pulleys and some muted finishes. Box Two rear derailleurs are still optimised for 11-50t cassettes and offer durability and performance for the most demanding terrain, just at lower price.Features: Material: Stainless Steel, Hardened Alloy Steel Finish: Matte Onyx Tri-Pack Limited Slip Clutch Sealed Bushings Pulleys Nylon Composite Knuckle Pivot-Tech Cable Stay Durable 3D Forged Linkages Forged Inner and Outer Cage Prime 9 Technology Compatible with Standard Derailleur Hangers (Non Direct-Mount) Weight: 290gManufacturer's Part Numbers: BX2PR9GRP03 Black Single Shift BX2PR9GRP04 Black Multi ShiftBuy Box Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original.Featuring a leverless design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads.They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.