Front:Conversion kit,Suitable for all Alex wheels apart from the VED range,To convert 12mm thru axle to Q/R type on front wheel .Rear:Conversion kit ,Suitable for all Alex wheels apart from the VED range ,To convert 12mm thru axle to Q/R type on rear wheel .
Shimano Hollowtech II Deore bottom bracket assembly. The minimal bearing interface gives super smooth rotation and reduced weight while the sealed cups effectively keep out dirt and water for maintenance free performance ride after ride. A durable anodised silver finish ensures they remain looking good.
LifeLine Thru Axle Adaptor (TT-02)The Lifeline TT-02 Thru Axle Adaptors allow you to convert the LifeLine TT-02 Fluid Turbo Trainer to thru axle compatibility.The adaptor kit consists of a replacement axle cup (to fit to the trainer) and a thru axle. Note there are 3 different thread pitches of thru axle available and so please check your current thread pitch. The axles are compatible with 142mm hub spacing only. Unscrew the 'axle cup' from the turbo trainer and replace this with the TT-02 Thru Axle Adaptor. Features: Convert you TT-02 Fluid Turbo Trainer to thru axle compatibility 12 x 142mm hub spacing Compatible with with LifeLine TT-02 Fluid Turbo TrainerBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Note: Axles must be removed before mounting these adaptors.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The three most common bolt and nut sizes are combined with the classic Park Tool 3-way Y-body8 mm 9 mm and 10 mm forged CR-V steel socketsCovered by Park's legendary limited lifetime warranty
Park Tool ST3 Three Way Socket Wrench. The three most common bolt and nut sizes are combined with the classic Park Tool 3-way Y body. 8mm, 9mm, and 10mm forged chrome vanadium steel sockets.
Park Tool Thru Axle Adaptors TS-2TAAllows truing stand to be used with 12mm, 15mm, 20mm and 25mm thru axle hubs. Axles must be removed to use adaptors. Adaptors mount easily to TS-2.2 or TS-2 Truing Stands.Buy Park Tool Thru Axle Adaptors from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano UN300 British Thread Bottom BracketThis MTB bottom bracket is specifically designed for traditional chainsets and it is available in many different size options to select. It features a durable and hard-wearing sealed cartridge with a square tapered spindle fitting. Shimano has also equipped this version with maintenance-free sealed cartridge bearings, which keep out mud, dirt and water for a longer bearing life.Features: Use: MTB Axle Length: Multiple options available to select Axle Size: Multiple options available to select Thread: British Compatibility: Traditional chainsets Bearings: Sealed cartridge Spindle Fitting: Square taperedTechnologies: Narrow Body: Narrow body allows clearance for cable routing under the bottom bracket. Sealed Cartridge Bearings: Durable, hard-wearing sealed cartridge bottom bracket with square tapered spindle fitting. Maintenance-free sealed cartridge bearing assembly keeps out dirt, mud, and water for long bearing life. A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:1 1/8" threaded headset,Ball bearings,Steel cups,For 44mm 1 1/8" headtubes.
This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.
This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.