Designed to cut new threads on fork steerers, or clean up existing threadsExpandable cutting dies are made from the highest quality high speed steel, to ensure a precision cut and a long lifeThe thread guide system allows the metal shavings produced to fall through the guide, preventing damage to the threadsIncludes a 1 inch x 24 tpi cutting die, and a 1 inch cutting guide1-1/8 inch x 26 die, 1-1/4 inch x 26 die, 1-1/8 inch guide, and 1-1/4 inch guide are also available, and will fit the same handle
Park Tool Oversized Adjustable Saw Guide SG-7.2 Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 2.75"" (70mm), as well as fork steerer tubes and other round tubes from 1-1/16"" to 1-3/4"" (27mm to 45mm). The SG-7.2 features two different cutting slots — standard and carbon cutting blade widths — in a hardened steel body with moulded contact points to protect tubes and frames.Features: The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deep The guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameter Two cutting slots are provided, one for standard saw blades and one for thicker, carbon specific blades Hardened steel body with moulded contact points to protect tubes and frames Made in the USA and covered by Park Tool's legendary limited lifetime warrantyBuy Park Tool Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deepThe guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameterTwo cutting slots are gived, one for standard saw blades and one for thicker, carbon specific bladesHardened steel body with moulded contact points to priotect tubes and frames.
Cut any threadless fork steerer quickly and accurately with this handy saw guideSlotted especially for thicker carbon cutting blades, which do not fit in standard cutting guidesYou can easily remove as little as 1 mm from the carbon steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer, but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches.
Cut any threadless fork steerer quickly and accurately with this handy saw guideSlotted especially for thicker carbon cutting blades which do not fit in standard cutting guidesYou can easily remove as little as 1 mm from the carbon steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches
Park Tool Storage Hook - Wood ThreadPark Tool Threaded Storage Hook 451Park Tool Storage Hooks are pefect for hanging bikes, wheels, etc. Vinyl coated to prevent scratching.Features:Wood threaded Made from 5/16" steel rodBuy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Threaded T47 Guides for BFS-1The Threaded T47 Guides for BFS-1 from Park Tool are ideal for use as a guide when repairing (facing) damaged threads on your frame threaded bottom bracket shell. This guide is compatible with Park Tool Bottom Bracket Facing Set (BFS-1); Bottom Bracket Tapping & Facing Set (BTS-1) tools and is compatible with Drive Side (left-hand threading) bottom bracket shells.The 648L is a T47 (47mm x 1.0) left-hand threaded standard guide for use when facing bottom bracket shells with the BFS-1 Bottom Bracket Facing Set and 690-XL Oversized Facer. This guide is for use on the drive side (right side) of the bike. This side of the bike drive uses counter-clockwise or left-hand threading.NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.Features: Ideal for facing bottom drive side (left hand threading) bracket threads Compatible Park Tool Products: Bottom Bracket Facing Set (BFS-1); Bottom Bracket Tapping & Facing Set (BTS-1)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Threaded T47 Guides for BFS-1The Threaded T47 Guides for BFS-1 from Park Tool are ideal for use as a guide when repairing (facing) damaged threads on your frame threaded bottom bracket shell. This guide is compatible with Park Tool Bottom Bracket Facing Set (BFS-1); Bottom Bracket Tapping & Facing Set (BTS-1) tools and is compatible with Drive Side (left-hand threading) bottom bracket shells.The 648L is a T47 (47mm x 1.0) left-hand threaded standard guide for use when facing bottom bracket shells with the BFS-1 Bottom Bracket Facing Set and 690-XL Oversized Facer. This guide is for use on the drive side (right side) of the bike. This side of the bike drive uses counter-clockwise or left-hand threading.NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.Features: Ideal for facing bottom drive side (left hand threading) bracket threads Compatible Park Tool Products: Bottom Bracket Facing Set (BFS-1); Bottom Bracket Tapping & Facing Set (BTS-1)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
It also works great when cutting handlebars or other round tubes from 22mm to 33mm. Simply clamp the SG-6 onto the tube and cut, letting the SG-6 guide the hacksaw blade. The SG-6’s non scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use.
Cut any threadless fork steerer quickly and accurately with this handy saw guideYou can easily remove as little as 1 mm from the fork steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches
Park Tool Threadless Nut Setter TNS-1The Threadless Nut Setter is used to install star-fangled nuts found on threadless headset systems. Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.Features:The TNS-1 is for 1” and 1-1/8” headset systemsBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.