The F-tools set a new standard for compact multi-tools. The thin and lightweight body is packed with 15 fundamental tools to keep you on the trail.Key Features:Magnetic case secures tool and provides larger handle and extra leverage,Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8,Torx: t-25,Screwdrivers: phillips #2, flat #1,Spoke wrenches: #0, 1, 2, 3,Chain tool 8/9/10/11/12 speed compatible,Bottle opener,Warranty: 5 years,Weight: 164g.
The Sawtooth is THE adventure tire of choice developed to handle any road surface and to be tough enough to withstand the rigors of exploration. The tread offers sharp angles and edges to hook onto any surface while the Endurant casing reinforces the sidewall for added protection and high carrying loads. Meanwhile our legendary GRIPTON® compound offers reliable grip and control and the centre tread is reinforced for high mileage. Lastly this iteration can be set up tubeless so you're able to run lower pressures for added grip and traction while also reducing the risk of pinch flats. Casing: 120 TPI Bead: Foldable Butyl wrapped bead = 2Bliss Ready Compound: GRIPTON® Flat Protection: Endurant Casing and BlackBelt 700 x 38mm psi 50-80 approximate weight 500g 700 x 38mm psi 50-80 approximate weight 500g 700 x 42mm psi 50-80 approximate weight 615g 700 x 42mm psi 50-80 approximate weight 615g
Park Tool Chain Tool (CT3.3)A tough, workshop-level bike chain tool that’s fits nicely in the hand and is simple to operate, Park Tool has made its CT3.3 model with a hard-wearing investment cast steel. It’s suitable for use with all single and multi-speed chains, including modern SRAM 12-Speed and Campagnolo 13-Speed types. Certain to become your go-to tool for changing and repairing chains, this versatile tool has a replaceable pin, making it ideal for busy bike mechanics.Features:Comfortable T-handle Replaceable driving pin (replacement pins sold separately - Park Tool part number: CTP-C) Investment cast steel body Adjustable locating shelf Compatible with all 5 to 13-Speed chains, single speed 1/8", 3/16", and half link chains Please Note: The CT-3.3 will install, but not peen (flatten), Campagnolo 11, 12 and 13-speed chain rivets.Please Also Note: The shelf fastener sizing is preset to allow easy adjustment from one width chain to another - any attempt to lock the shelf in place will result in damage to the tool. Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Everything you need to build you bike on the go… Comes in a small zippered bag that easily fits in your pocket or backapack…, 1x 6mm, 1x 8mm, 1x 17mm deep socket, 1x socket extension, 1x torque handle
Engineered for use with the Terra and Gravita Alpaca MTB saddles, the Alpaca tool carrier is an incognito approach to tool storage. Its minimal design means that tools sit stealthily beneath the saddle, tucked away but ready for repairs. For a secure, integrated connection, the tool carrier easily affixes to fizik's Alpaca saddles with a single screw and includes a twelve-feature multitool with inflation head, removable housing for two CO2 cartridges, reusable zip ties and extra space for other small essentials.Other necessities, such as spare tubes, tyre levers and the like, can be easily strapped to the outside of the carrier.Alpaca tool carrier includes...Two removable 16g CO2 housings (CO2 cartridges not included)12 feature multi tool Hex wrenches - 2/2.5/3/4/5/6/8mm,Screwdrivers - flat / phillips head,Torx - t-25/t-10.Inflator headTwo reusable zip ties.
Key Features: The HCW-16.3 is a combination 15mm pedal wrench and chain whip,Use for both pedal removal/installation and for cassette removal,Chain whip features improved compatibility with 5 speed to 12 speed mountain and road bike cassettes and freewheels,The HCW-16.3 is 10.75" long (27.3cm).
Key Features: Shop quality, preset torque driver that limits torque applied to fasteners, preventing overtightening and damage to lightweight components, Preset to apply 4 Newton Meter (Nm) of torque when rotating clockwise, All metal internal construction for long life, Comfortable ergonomic composite moulded grip, Includes 3mm, 4mm, 5mm and T25 bits (stored in handle), 1 1/4 inch drive, Magnetic socket retains bits, Assembled and calibrated at the PARK TOOL factory in St. Paul, Minnesota.
A 14-function multi-tool built around three tyre levers, held together with magnets. Made from carbon-fibre-injected 'metal-replacement' plastic, these levers are six times stronger than market-leading levers and, if used correctly, almost impossible to break. Even so, the ML125CF comes with a lifetime guarantee.Weighing just 130g and with a new, slimmer lever profile, this lightweight tool can be used to enter even the smallest gap between rim and bead on a thin road tyre, making light work of any required tyre-changing. Unlike the ML125, the ML125CF comes with a Stique-branded neoprene case with a velcro open/close function.Key Features:ML1CF (Bottom Lever):Tyre lever,Split chain-link holders,£1 coin slot,Spoke hook (flat and round),Dust-cap holder,.ML2CF (Middle Lever):Tyre lever,£1 coin slot,Spoke wrench (in two sizes),CR-type battery holder,Die-cast, magnetic tool-bit holder,4mm Allen key (with rubber cap),.ML5CF (Top Lever):Tyre lever,Stainless-steel chain-breaker (with chain hook),5mm Allen key,Phillips #2 screwdriver,Torx T25 wrench,Bottle opener,.
The Park Tool CN10C Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. Cold forged, heat treated steel handles for strengthPrecision ground cutting jaws for a clean cut on every cableBuilt in crimper for cable end caps and forming hole for reforming housing ends and housing ferrulesWire latch holds handles together when not in useThe CN10C has cold forged, heat treated steel handles for strength and precision ground cutting jaws for a clean cut on every cable. Dual density moulded grips are specially contoured for superior comfort and control. The CN10C has a built in crimper for cable end caps and a forming hole for reforming housing ends and housing ferrules. A wire latch holds the handles together when not in use.
Wolf Tooth ShiftMounts are adapter mounts which allows you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura. If you value seamless drivetrain integration and want to make efficient use of handlebar space then this is a great addition to your ride.Mount Type:MM-ISII is for a SRAM Matchmaker shifter mounting to a Shimano I-Spec II brake,MM-ISEV is for a SRAM Matchmaker shifter mounting to a Shimano I-Spec EV brake,ISEV-ISB is for a Shimano I-Spec EV shifter mounting to a Shimano I-Spec B brake,ISEV-ISII is for a Shimano I-Spec EV shifter mounting to a Shimano I-Spec II brake,MM-MAG is for a SRAM Matchmaker shifter mounting to a Magura brake.Compatibility:Designed to work with rear (right side) brakes and shifters.,Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters.,Shimano I-spec A, Hope, and TRP brakes are not supported.,Shimano I-spec EV to Magura brakes is not supported because of geometric challenges..
Introducing the IceToolz Internal Routing Tool. For simple looking and better appearance nowadays, rider would like to have all the cables & wires hidden inside of bike frame but how Some cables are not soft enough, some are too thick etc. IceToolz is coming with the solution.First, please check what type of cable is hidden digital single wire, brake cable or shift cable. Connect one end below for suitable wire and put other end into the entry position of hidden cable. Holder leader post to guide the internal cable go through until the end.Practical help when pulling brake or gear cable through bicycle framesEdition: 3 cables with magnetColour: orangeMaterial: Plastic-coated stainless-steel cable with magnetic headUse: for aluminium, carbon fibre or titanium framesWeight (kg): 0.106Including: contra magnetic sliding pin
Park Tool Cable Stretcher BT-2Park Tool Fourth Hand Cable Stretcher BT-2Commonly referred to as a “4th Hand”, the Park Tool Cable Stretcher pulls cables tight for adjustment of derailleurs and brakes. It features one-hand operation with a thumb lock to hold the cable tight while your hand is freed up to tighten pull-up bolts and nuts.A must for any shop, home or professional.Thumb lock for one-handed operation Made from chrome plated heat treated steel Cushion grips for comfortBuy Park Tool Fourth Hand Cable Stretcher from Chain Reaction Cycles, the World's Largest Online Bike Store.