Use with any 3/8 inch drive torque wrench to verify pedals are torqued to the correct specLaser cut heat treated and plated for long lifeMade in the USA and covered by Park's legendary limited lifetime warranty
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do itCuts the outer edge and lower surface of the crown race seatA simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubesIncludes high speed steel cutters and adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks and 30.1 mm crown race seat on 1-1/8inch forks
Park Tool Crown Race Setting System (CRS-15.2)Designed for the fitting of bearing races for 1.5" and 1-1/4" forks, the Crown Race Setting System CRS-15.2 allows you to do so in an easy, damage-free manner. Safe and Accurate Race Seating The system utilises two different insert rings and a further aluminium insert to ensure there is no direct contact with your bearing's surface as you lightly hammer the tube's end cap to seat the race firmly and properly in place. Including an extension that will allow you to work on fork steering tubes up to 425mm, the Crown Race Setting System CRS-15.2 will allow you to fit your races safely and accurately. Features: Material: Aluminium SHIS Terminology: CRS-15 services crown races in SHIS 33 and 40. Compatible Bearing Races: 1.5", 1-1/4" Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crown Race Setting System - CRSAs a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features: Precision installation tool specifically designed for setting headset crown races Accurately places the crown race whilst distributing the impact evenly and without damage to the bearing surface Safer, more accurate alignment and easier to use than traditional slide hammersBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.
The Park Tool CRS1 Crown Race Setting System has taken a fresh new approach to crown race installation. Traditionally, a mechanic would slam a tube down onto the bearing surface to set the race in place. The CRS1 offers a different approach that offers faster, safer, and more precise installation. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS1 set includes one universal setting tube, three 1 inserts, and three 1-1/8 inserts.
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
Designed for the safe and clean cutting of carbon steerers, handlebars and seatmasts,Super fine cutting edge prevents damage to the carbon weave either side of the cut,Fits Park SAW-12 and many other 12 inch hacksaws.
Designed for the safe and clean cutting of carbon steerers handlebars and seatmastsSuper fine cutting edge prevents damage to the carbon weave either side of the cutFits Park SAW-12 and many other 12 inch hacksaws
A professional quality shop chain tool that works on single speed as well as 5-12-speed Road and Mountain Bike derailleur chains, including SRAM® AXS 12 speed. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin. The CT-3.3 will install, but not peen, Campagnolo® 11 and 12-speed chain rivets. Made in the USA and covered by Park Tool's legendary limited lifetime warranty
The Park Tool CT-3.3 Professional Chain Tool is a professional quality shop chain tool that works with 1/8", 3/16" single speed chains and 5 to 12-speed / 3/32" road and mountain bike derailleur chains* including SRAM AXS 12-speed, Shimano 12-speed chains and Campagnolo 13-speed chains.A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains, including SRAM AXS 12 speed, as well as 1/8 and 3/16 chainsThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivetsBuilt to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pinThe CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivetsMade in the USA and covered by Park Tool's legendary limited lifetime warrantyThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). Works with single speed half-links.*The CT-3.3 will install, but not peen, Campagnolo 11, 12 and 13-speed chain rivets (see CT-4.3 or CT-6.3)
Park Tool CT-5 Mini Chain Brute Chain Tool This chain splitting tool is of workshop quality yet manages to be contained in it's very compact form,meaning this is a great tool you can keep either in the garage or in your saddle bag. Park Tool are a well established company that have been producing quality tools for a long time, so you can put your trust in the brand. - T.H Key Features: A chain tool that is small enough to go anywhere, yet which performs like a full size workshop tool Fine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivets. Includes a loosening shelf to release stiff links after assembly. Replaceable driving pin head Works on most bicycle chains, including 10-speed. Weighs just 77 grams.