Park Tool Crank Puller (CCP-44)With its long handle and fine thread to engage fully with compatible cranksets, the CCP-44 Crank Puller gives you the grip and control for removing even the most stubborn crank arms. Park Tool has made this easy to use pulling tool compatible with a wide range of Shimano Octalink and FSA ISIS Drive models.Features: Specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a "self-extracting" system22 x 1mm fine thread provides leverage needed to remove tight crank armsStrong rotating tip system ensures smooth operation and long life Not suitable for use with square taper type cranksetsBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
Key Features: The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headset,The 768 is used with the 690-XL facer and the 750 centering cone adapter,Facing the head tube will improve the alignment of the bearings,The 768 pilot fits the Park tool HTR-1 Head tube Reamer and Facer Set.
Made from a P600/D PU coated heavy duty fabric, it can withstand the wear and tear of commuting or travelling with your bike to ensure your chain remains damage-free from the garage to the starting line. Dirt, tear and oil resistant, it is the optimum way to keep your chain and the areas it comes into contact with protected.
Key Features:Allen keys: 2 2.5 3 4 5 6 and 8mm.,Phillips and flat screw drivers.,T25 torx key.,Spoke keys.,Tyre levers.,8/9/10/11/12/13/14mm spanners.,Chain pin extractor.,Bottle opener..
What more could you want than pizza after a good day of wrenching or riding? An update of one of the all-time greats the PZT-2 Pizza Tool is bigger (for better hand position) better (super sharp large diameter stainless steel cutting wheel cuts through even the toughest terrain) and stronger! Amaze your friends show off to your in-laws; a bicycle and also a pizza cutter! Covered by Park Tool's legendary limited lifetime warranty
Lezyne V Pro 7 Multi ToolThe V Pro 7 Multi Tool from Lezyne features a durable and lightweight construction comprising of machined aluminium side plates and seven tools made from machined steel and coated in Lezyne's Black Anti-Corrosion technology. This multi-tool is suited for storing in any backpack or saddle bar and is ideal for a wide range of road or trail-side mechanical issues.Versatile and Reliable for Road and Mountain Bike UseThe V Pro series includes a refined collection of tools developed for today's modern bicycles. Each model is designed and manufactured in-house and engineered to efficiently repair most bike adjustments and tune-ups whether your riding over tarmac or trail.Strong, Durable and Corrosion ResistantThe machined steel tool bits are now longer and introduce Lezyne's Black Anti-Corrosion technology, which provides superior corrosion resistance. The machined aluminium side plates are anodized black, and deliver a compact, comfortable feel during use. With six available options, and unmistakable Lezyne styling, the lightweight V Pro tools offer amazing value and functionality for all types of cyclists.Features: Material: Aluminium Side Plates, Steel Tool Bits with Black Anti-Corrosion technology Tools: HEX: 3/4/5/6mm TORX: T10/T25 Screwdriver: PHILLIPS Weight: 65gBuy Lezyne Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blackspire Snaggletooth Cinch Oval BOOST ChainringEnjoy a smooth and reliable performance no matter what your riding discipline from the Oval Boost Chainring from Blackspire. Benefiting from an optimised tooth profile and a constant torque for exception traction that prevents stalls and spinouts, this is the ideal component to your bike. Lightweight and Durable Oval ChainringThis brilliant model is constructed from a CNC machined 7075 T-6 aluminium for low weight and durability as you soar around the mountain. This Oval-shaped version is specifically designed to be used with any cranks which feature a RaceFace Cinch interface. When working in tandem with modern clutch derailleurs, the possibility of chain drops is eradicated which makes for a strong and confidence-inspiring experience.Features:Material: CNC machined 7075-T6 AluminiumFinish: AnodisedTooth Profile: Narrow/WideCompatibility: 9, 10, 11 or 12-speed cranks that use a RaceFace Cinch interfaceFrame Compatibility: 148mm BoostShape: OvalOvality: 12-13 degrees with a timing of 115 degrees after TDC (Top Dead Centre)Weight: 227gBuy Blackspire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blackspire Snaggletooth NW Cinch Boost Chain RingThis top-quality chainring delivers all the benefits of Blackspire's highly sought-after tooth profile for phenomenal 1x drivetrain performance. Constructed from CNC'd 7075 T-6 aluminium for a low weight and durability, this round-shaped model is specifically designed to be used with any cranks which feature a RaceFace Cinch interface. When working in tandem with modern clutch derailleurs, the possibility of chain drops is eradicated, making for a strong and confidence-inspiring experience. Features: Arm Material: CNC'd 7075-T6 Aluminium Chainring Material: AnodisedTooth Profile: Narrow/Wide Compatibility: 9, 10, 11 or 12 speed cranks which use a RaceFace Cinch interface Frame Compatibility: 148mm Boost Shape: RoundBuy Blackspire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blackspire Snaggletooth NW Cinch Boost Chain RingThis top-quality chainring delivers all the benefits of Blackspire's highly sought-after tooth profile for phenomenal 1x drivetrain performance. Constructed from CNC'd 7075 T-6 aluminium for a low weight and durability, this round-shaped model is specifically designed to be used with any cranks which feature a RaceFace Cinch interface. When working in tandem with modern clutch derailleurs, the possibility of chain drops is eradicated, making for a strong and confidence-inspiring experience. Features: Arm Material: CNC'd 7075-T6 Aluminium Chainring Material: AnodisedTooth Profile: Narrow/Wide Compatibility: 9, 10, 11 or 12 speed cranks which use a RaceFace Cinch interface Frame Compatibility: 148mm Boost Shape: RoundBuy Blackspire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blackspire Snaggletooth NW Cinch Boost Chain RingThis top-quality chainring delivers all the benefits of Blackspire's highly sought-after tooth profile for phenomenal 1x drivetrain performance. Constructed from CNC'd 7075 T-6 aluminium for a low weight and durability, this round-shaped model is specifically designed to be used with any cranks which feature a RaceFace Cinch interface. When working in tandem with modern clutch derailleurs, the possibility of chain drops is eradicated, making for a strong and confidence-inspiring experience. Features: Arm Material: CNC'd 7075-T6 Aluminium Chainring Material: AnodisedTooth Profile: Narrow/Wide Compatibility: 9, 10, 11 or 12 speed cranks which use a RaceFace Cinch interface Frame Compatibility: 148mm Boost Shape: RoundBuy Blackspire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.