With over 8 inches of sliding travel adjustment and an adjustable hook which accommodates tubes up to 1 3/4" in diameter, this tool will not only reshape your frames and forks but will do the same for your cranks and handlebars to boot. Covered with a vinyl coating on the hook and fulcrum, your bike's painted surfaces will be free from scratches and dings while you work away. The Frame & Fork Straightener FFS-2 is a versatile and well-crafted tool for essential maintenance of your forks and frames.
Improperly aligned frame and fork dropouts can cause bent axles and quick release skewers as well as tracking and shifting problemsThe FFG-2 quickly determines whether dropouts are aligned and parallelIf an error is detected long handles and comfortable moulded grips afford plenty of leverage for straighteningWorks on frames and forks with dropout spacing up to 160 mm
Park Tool Frame Alignment Gauge (FAG-2) The Frame Alignment Gauge FAG-2 from Park Tool is a specifically designed device for accurate measurement of your frame's positioning, taking its reading with precision, direct from the drop out.Quick and Easy Alignment Measurement When your frame is off kilter with your wheels, shifting and tracking can often be impacted, lowering you and your bike's performance. Even after adjusting wheels and derailleurs, your frame may still not be in the right position. With the Frame Alignment Gauge FAG-2, you can quickly and accurately see exactly what realignment is required to straighten out the issue. Suitable for use on all types of bikes, the FAG-2 has a retractable pointer for making sure alignment is properly achieved on any size of bicycle. Features: Retractable pointer for use on all sizes and types of bike Accurate and precise alignment measurement, direct from the drop out Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Taking it's reading directly from the dropout, the FAG-2 will precisely tell you what level of realignment is required to get your bike back to its peak performance. Off-kilter frames often have a detrimental impact on how your bike rides and even after wheel and derailleur adjustments, your wheels may still not be lined up properly. However, with this Frame Alignment Gauge and its retractable pointer, the exact realignment can be pin-pointed quickly and precisely for any size of bike. The FAG-2 is an ideal device to help make sure your bike and wheels are perfectly aligned for optimum performance.
Part of a range of taps to cover all normal needs on a bikeMade of high carbon steel, precision ground and hardenedFor cleaning out and repairing threadsFits into any conventional tap handle10 x 1 mm size is for derailleur hanger.
Park Tool Freewheel Remover (FR-1.3) The Freewheel Remover FR-1.3 is another well-crafted tool from Park Tool, designed for the efficient and easy removal and installation of the most common thread-on 12-spline 5-10-speed freewheels. Simple Freewheel Removal and Fitting Fitting perfectly on to your axle, the FR-1.3 makes light work of fastening or loosening your freewheel for quick and easy removal and replacement. Compatible with a wide range of freewheels, this Park Tool device features an enlarged thru-hole, capable of accepting wheels with axles up to 14mm diameters, including E-Bike wheels. The 1" hexagonal end of the FR-1.3 makes it easily compatible with most wrenches and bench vices for additional leverage and support. Features: Compatibility: Shimano, Sachs Aris, Sun Race, DNP Epoch and other 5-10-speed freewheels Size: 22.6 mm Diameter + 1" Hexagonal Head Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
Park Tool Freewheel Remover Wrench FRW-1The FRW-1 is a one-inch socket and securely holds freewheel and lockring tools (FR-1 through FR-8 plus the BBT-5/FR-11) for removal and installation. Features an investment cast head with locking setscrew and a long, round, vinyl-dipped handle for superior leverage.Features: One inch socket Securely holds freewheel Investment cast head Lone, round, vinyl dipped handle Note: Always use a skewer or axle nut to hold a cassette/freewheel tool in place during removalBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool FRW1 Freewheel Remover Wrench securely holds freewheel and lockring tools (FR-1 through FR-8) for removal and installation. Features an investment cast head and a long, round, vinyl dipped handle for superior leverage.
The perfect tool to remove stubborn freewheelsLong tubular handle for maximum leverageHex shaped end accepts all Park freewheel remover toolsLocking knob holds freewheel tool securelySuper strong investment cast steel
Designed to cut new threads on fork steerers, or clean up existing threadsExpandable cutting dies are made from the highest quality high speed steel, to ensure a precision cut and a long lifeThe thread guide system allows the metal shavings produced to fall through the guide, preventing damage to the threadsIncludes a 1 inch x 24 tpi cutting die, and a 1 inch cutting guide1-1/8 inch x 26 die, 1-1/4 inch x 26 die, 1-1/8 inch guide, and 1-1/4 inch guide are also available, and will fit the same handle