Designed for the demands of today's mountain bike (MTB) trail riding disciplines, this dropper post lever is fully-equipped for wherever your next adventure takes you. It is specifically designed for Shimano I-SPEC II and includes the IS-II hardware for quick and easy installation. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. ReMote IS-II for Shimano I-SPEC II - Includes IS-II hardware. UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTEISII
By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers. In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility: Compatible with Rockshox Reverb B Spec Stealth (internal) routing dropper posts. NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
Designed for simple and seamless drivetrain integration, this ShiftMount adaptor lets you mount your shifter to a specific brake type. This means that you'll benefit from more handlebar space thanks to this model's clever design that easily integrates your brakes and shifters for a clean look. Please note: There are multiple mounting options available for this product. Please select from the menu the mounting option that matches your set-up. Manufacturer's Part Numbers: SHF-MM-IS11 Black SRAM MM - I-Spec II WTSHF22ISII Black 22.2mm I-Spec II WTSHF22ISEV Black 22.2mm I-Spec EV WTSHFISEVMM Black I-Spec EV SRAM MM
This kit features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility: 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Part Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI
With this Saris ANT+ Bluetooth Speed/Cadence sensor recording your training data has never been easier, Saris have developed a Speed and Cadence sensor that is contained within the same unit. No more fiddling around with magnets, just install the battery, choose speed or cadence, mount the unit to either crank arm or wheel hubs and you are ready to go.
Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customisable rubber flap that can be cut to meet your handlebar's inner diameter. The EnCase System: Bar Kit One includes a Hex Bit Wrench Multi-tool, a Chain + Tyre Plug Multi-tool, and two Storage Sleeves. HEX BIT WRENCH MULTI-TOOL - 14 functions (spoke wrench for 0.127" (3.23mm) nipples; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx compatible) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when tool head is bent - Store in handlebar with EnCase Storage Sleeve - Magnet on the bottom of tool for convenient storage on steel bike stands (or refrigerators) CHAIN + TYRE PLUG MULTI-TOOL - Compatible with all bicycle chains including 12 speed - Inserter tool and bacon strips plug holes in tubeless tyres - Five strips included; refills available (EnCase System Extras) - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench STORAGE SLEEVES - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminium end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a presta-to-schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customise fit for larger-diameter road handlebars Compatibility Fits most mountain handlebars and road handlebars. Does not fit ergonomic-style road bars with extra bends in the drops. Works with both carbon and aluminium handlebars. The minimum internal bar diameter is 17.5mm. Known incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZA, BMC RCB01, S-Works Hover Carbon
The Wolf Tooth ReMote Clamp Conversion Kit allows you to attach a Wolf Tooth ReMote Dropper Lever to a specific handlebar diameter or brake lever. This option is specifically designed for use with SRAM Matchmaker X. Genuine Wolf Tooth spare parts. Manufacturer's Part Number: WTMMCONVKIT Black One Size
These Wolf Tooth chainring bolts come as a pack of four and feature chainring bolts that are made from a rock-solid aluminium construction. This makes them great for holding your single-speed chainring securely in place on your adventures. Compatibility: Any of Wolf Tooth's bolt-on Drop-Stop chainrings with through holes. Works with other brand's single chainrings as well. Manufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NI
Ideal for replacing the lost bolt that came with your Wolf Tooth ReMote, this is a high-quality and genuine spare part.
These Wolf Tooth chainring bolts can also be used with non-Wolf Tooth branded single chainrings as well that feature a 110mm or 130mm BCD. Coming equipped with a tough aluminium construction, this kit is a great upgrade for replacing old or lost chainring bolts and breathing new life back into your setup. Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt on single chainring that does not have threaded standoffs.
This versatile lubricant gives you exceptional drivetrain performance in both wet and dry conditions, keeping your gear shifts smooth, gear set quiet and slows down component wear. All Conditions Chain Lube WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving the overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. Synthetic Lube Ensures Smooth Drivetrain Performance Anywhere As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
This plier-set includes a spoke wrench, valve-core wrench, screwdrivers with multiple bits, an 8mm Hex and T10 and T25 Torx compatible bits. Plus, it features magnets to keep all the tool and tool-bits in place during use and when in storage. Lightweight, Durable and Convenient Multi-Tool The 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on a mountain bike (MTB) and road rides alike. Compatibility: Pliers work with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman) Specifications: Material: 7075-T6 Aluminium handles, CrV tool steel swivel head, S2 tool steel bits Size: 146mm x 20mm x 9mm Master links are not included Patent Pending Made in the USA Weight: 68g