Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Nukeproof Horizon CO2 Style Tubeless Repair Kit Based on a 16g size CO2 cartridge but instead of having CO2 inside, this tubeless repair kit houses 5x 1.5mm plugs and 5x 3.5mm plugs for repairing holes and punctures in tubeless tyres. Weighing in at only 38g, it's incredibly lightweight and easy to carry or pack away in your backpack for your rides. It features a tool capsule that doubles up as a handle for the plug insertion tool. On the inside of the threaded section there is a valve core remover hidden away. On the opposite end, the hole has been designed to loosen stuck Presta valve nuts, which can be tricky to open if there is old sealant in the valve.The plugs are super tacky, so they do not require you to use additional glue. Spare plugs are available here.Features: Plug insertion tool 5x 1.5mm plugs 5x 3.5mm plugs Tool Dimensions: 91x22mm Weight: 38g including spare plugsBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stans No Tubes Tubeless Rim TapeStan's No Tubes have been producing tubeless solutions since 2000; Stan's is now the first name in tubeless products. This mountain bike tubeless tape provides an efficient and durable seal and when fitted, weighs only 5g for the 21mm width or 7g for the 25mm width.Features: Yellow Sealing Tape 10yd x0.826" (9.14m x 21mm) or 10yd x 1" (9.14m x 25mm) For ZTR Olympic, ZTR 355, ZTR 355 29er (21mm) or For ZTR Flow, Flow 29er, Arch, Arch 29er only (25mm) Can do 5 rims with one roll Weight per Rim: 5g (21mm) or 7g (25mm)Buy Stans No Tube Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Weighing in at only 38g, this tubeless repair kit is extremely lightweight and easy to carry or pack away in your backpack for your rides. It features a tool capsule that doubles up as a handle for the plug insertion tool. On the inside of the threaded section there is a valve core remover hidden away. On the opposite end, the hole has been designed to loosen stuck Presta valve nuts, which can be tricky to open if there is old sealant in the valve. The plugs are super tacky, so they do not require you to use additional glue. Spare plugs are available here.
Ideal Use – X Country/Enduro in All ConditionsThe ubiquitous Fire is now Tubeless ready.Ready to work with all Tubeless systems.• Folding Bead• Tubeless Compatible• Fast rolling high grip tread design• Multi step knobs• Silica based burning edged side knobs for high grip• ASB anti-snake bike chaferWeight: 600g approx.
CushCore Tubeless Presta Valve SetSpecifically designed to work with CushCore tyre inserts, this tubeless valve set features two valves that use an air passageway that is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing airflow through the valve. The valve body is CNC-machined from 6061 T-6 aluminium, with a tapered rubber collar permanently bonded at the sealing interface. The valve core can be removed to add tyre sealant. A locknut with an O-ring seal and valve cap is included.Features: Material: High-quality 6061 T6 Aluminium tubeless valves Seal: Tapered Nitrile rubber seal Length: Multiple options available to select Valve Core Tool Included: Yes Drilled base to improve sealant flow around insert Unique cross-drilled base for air flow around inserts Removable valve core for faster flow of air and sealant Weight: 90gManufacturer's Part Numbers: CC-10004 Green CC-10006 Red CC-10013 Orange CC-10014 Blue CC-10007 Green CC-10005 Black CC-10008 Black CC-10009 Red CC-10010 Green Turquoise CC-10011 Blue CC-10012 OrangeBuy CushCore Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
CushCore Tubeless Presta Valve SetSpecifically designed to work with CushCore tyre inserts, this tubeless valve set features two valves that use an air passageway that is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing airflow through the valve. The valve body is CNC-machined from 6061 T-6 aluminium, with a tapered rubber collar permanently bonded at the sealing interface. The valve core can be removed to add tyre sealant. A locknut with an O-ring seal and valve cap is included.Features: Material: High-quality 6061 T6 Aluminium tubeless valves Seal: Tapered Nitrile rubber seal Length: Multiple options available to select Valve Core Tool Included: Yes Drilled base to improve sealant flow around insert Unique cross-drilled base for air flow around inserts Removable valve core for faster flow of air and sealant Weight: 90gManufacturer's Part Numbers: CC-10004 Green CC-10006 Red CC-10013 Orange CC-10014 Blue CC-10007 Green CC-10005 Black CC-10008 Black CC-10009 Red CC-10010 Green Turquoise CC-10011 Blue CC-10012 OrangeBuy CushCore Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.