Eddy Current is the name of Schwalbe's first tyre specifically developed for the E-MTB - for all mountain, enduro and gravity riding. The blocks are about 20 percent larger than on the Magic Mary, for example. This results in greater stability, more traction and longer durability. This Super Gravity model is designed for use with longer travel bikes. A revolution for E-MTBs, this electric mountain bike tyre is the Schwalbe's first real E-MTB specialist. It allows uncompromising riding even uphill, takes fierce acceleration as well as allowing technical riding on trails. Its solid appearance comes from the stable blocks, more rubber and big widths. Additional Features: Maximum propulsion and braking traction through massive blocks that transmit sufficient power to the ground, even on the steepest climbs Hard-wearing thanks to large-volume centre studs Tread design inspired by Motocross with massive, stable studs in the centre and the shoulder area for reliable riding behaviour Concise V-Grooves in the centre and side blocks for direct, precise steering characteristics. Specially adjusted design for rear wheel use Recommended Pressures: 27.5x2.6" and 29x2.6": 20-45 psi (1.5-3 bar) 27.5x2.8": 17-38 psi (1.2-2.6 bar) Weights: 27.5x2.6": 1455g; 27.5x2.8": 1470g; 29x2.6": 1430g Technologies: Addix Soft Addix Soft is a compound that bridges many disciplines. It’s just as at home in the enduro and downhill world as it is in the demanding discipline of all-mountain and trail riding. It also impresses when used in combination with other ADDIX tyres – more speed: Soft on the front, Speedgrip on the back. Or more damping: Ultra Soft on the front, Soft on the back. E-50 E-Bike tyres with European ECE-R75 approval. Schwalbe's recommendation for fast E-Bikes - S-Pedelecs with type approval, insurance and motor assist over 25 km/h – for which a special tyre approval is necessary. Tubeless Technology For all ambitious sports cyclists, Tubeless is the right choice. Only Tubeless achieves the best values in terms of more speed, grip, puncture protection and comfort. Super Gravity Go where others dare not to venture. Where the rider and the trail demand everything from the material. Where bikes have a lot of travel. Right there is the zone for tyres with Super Gravity construction. Evolution Line Tyres with the very best possible highest grade materials with the latest technology.
Handmade high-performance tyre offering maximum grip, low rolling resistance and high comfort.Ratings:Rolling Resistance: 6/6,Wet Grip: 6/6,Dry Grip: 6/6,Durability: 3/6,Puncture Resistance: 3/6,.Key Features:Superior Wet and Dry Grip - All-Weather Silica (AWS) TriComp compound,Low rolling resistance and a high degree of comfort - 320 TPI handmade cotton casing,Excellent puncture protection - Polycotton anti-puncture layer.
This versatile tubeless XC tyre is perfectly suited for hardtails and bikes with medium travel. It features a lightweight Addix Speed compound, which allows it to handle all the knocks and bumps associated with XC racing and trail riding. Coming equipped with Schwalbe's state-of-the-art Super Ground construction with additional Bead-to-Bead fabric, this model provides improved overall cut resistance. As a result, the tyre is comfortable and stable even on more demanding terrain conditions. Outstanding for Fast and Dry XC Tracks Its low weight and extremely low rolling resistance makes it Schwalbe’s fastest MTB tyre! • Multiple small, flat studs for fast and quiet rolling. • Numerous grip edges for hard ground. • Edged shoulder studs for good grip and control in curves. Technologies: Super Ground: Combines lightweight and stability. Feels comfortable in any terrain. Balanced ratio of puncture protection and smooth-rolling. For flowing trails, long rides and any terrain. Tubeless Technology: For all ambitious sports cyclists tubeless is the right choice. Only Tubeless achieves the best values in terms of speed, grip, puncture protection and comfort.
Specifically tuned for front wheel use, this cross-country tyre is a perfect pairing for Schwalbe’s Racing Ralph rear tyre, bringing you the ideal balance of low rolling resistance and excellent traction over various surface types. Additional Features: Shifted centre blocks enable precise steering and high braking traction Stable shoulder blocks for precise steering Very quiet rolling characteristic with excellent rolling resistance Recommended Pressures: 29x2.25”: 1.8-3.7 Bar (26-54 psi); 29x2.35”: 1.6-3.5 Bar (23-50 psi) Weights: 29x2.25”: 686g; 29x2.35”: 705g Technologies: ADDIX Speed ADDIX Speed is the compound for XC race specialists, it catapults our XC tires into a new performance dimension. It's the answer for those who’d like to go even faster. There’s only one thing that ADDIX Speed really loves and that’s speed. So the rolling resistance has been chopped yet again. Super Race In no other discipline is the focus on rolling resistance and weight as critical as it is in cross-country and marathon competition. With the Super Race construction, Schwalbe is also setting new standards in suppleness - no other carcass glides so silky smooth over the ground and thus providing traction as Super Race does. Tubeless Technology For all ambitious sports cyclists, Tubeless is the right choice. Only Tubeless achieves the best values in terms of more speed, grip, puncture protection and comfort. E-25 Tyres with the recommendation "E-25" are the perfect choice for all pedelecs with pedal assistance up to 25 kph. The most important criterion for this recommendation: security.
This CX tyre features an Addix SpeedGrip compound that combines speed, grip and durability in dry or wet conditions. Its Super Ground construction also makes it feel comfortable in any terrain thanks to its balanced ratio of puncture protection and smooth-rolling performance. Ideal for flowing trails, long rides and any terrain, this model offers a low weight and stabilised roll, as you tackle the more demanding of racing conditions. Coming kitted out with TLE Tubeless Easy technology, riders will also enjoy its tubeless benefits such as lower rolling resistance, increased stability and fewer risks of punctures. A Cyclo-Cross Tyre for All Conditions Fast and grippy at the same time on paved and loose terrain, in dry or wet conditions. The Allround offers everything for the perfect cyclo-cross race. • Pronounced side studs for high cornering speed in dry and wet conditions. Best performance is provided by the X-One Allround with Tubeless Easy technology, used tubeless. Manufacturer's Part Numbers: SCH9115 Black 1.3" 700c SCH9114 Black 1.35" 700c SCH9113 Black 1.3" 27.5"
Developed specifically for E-MTB riding, this tyre features Vittoria's renowned Graphene 2.0 compound that reduces rolling resistance and increases range as well as battery life. Coming equipped with technologies from both the enduro and XC riding disciplines, this versatile electric mountain bike tyre delivers a fast roll and incredible grip when climbing at slow speeds. Another benefit is its progressive sipe width that makes blasting across rock gardens, tree roots and debris a breeze, thanks to its tactile grip. - Leading-edge steps for fast-rolling (like a ramp), but better climbing in technical terrain at slow speeds - Progressive sipe width for tactile grip on rocks and roots - Graphene 2.0 compound reduces rolling resistance, increasing range and battery life Enduro inspired performance meets XC efficiency – for your e-bike! By borrowing the best traits from the popular Martello, Barzo, and Gato models, the Agarro utilizes proven technologies from both the Enduro and XC categories. This combination of performance is ideal for the Trail category, as it provides predictable grip and efficiency in a mix of conditions. Manufacturer's Part Numbers: 11A00331 Brown/Black Anthracite-Black 2.6" 27.5" 11A00332 Brown/Black Anthracite-Black 2.35" 29" 11A00333 Brown/Black Anthracite-Black 2.6" 29"
Combining years of athlete feedback with some of Vittoria's finest technologies, this MTB tyre is engineered for maximum speed, traction and control on every off-road adventure. It features the prominent Graphene 2.0 compound, which allows it to deliver a performance boost specifically for speed, wet grip, durability, and puncture resistance. Vittoria has also equipped this trail-ready model with a tubeless-ready profile, so riders can benefit from increased comfort, stability and less chance of flats as they tackle the more demanding off-road terrain conditions. Fast-Rolling MTB Tyre Starting with a defined centre tread, the Mazza uses deep siping in the direction of rotation, allowing the tyre to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading-edge rolls like a ramp, but digs in on climbs, making it a top choice for both front and rear use. Substantial room was designed into the centre tread to provide braking traction, while also accelerating cleaning. Progressive Sipe Width Technology Cornering on the Mazza is handled by Vittoria’s trademark progressive sipe width technology, which gives a gummy inside effective edge, but without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Graphene 2.0 Compound This MTB tyre's generous tread depth claws into a range of terrain and is stabilised with Vittoria’s proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky, while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance, and increased wear life. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge centre-tread maintains speed and delivers climbing traction Manufacturer's Part Numbers: 11A00279 Black 2.4" 27.5" TLR 11A00281 Black 2.6" 27.5" TLR 11A00280 Black 2.4" 29" TLR 11A00282 Black 2.6" 29" TLR
With its wide side knobs giving it a fast cornering performance, as well as paddle-like knobs for responsive braking, the tread of this tyre is a perfect match for cross-country riders. Plus, this tyre sports 3C MaxxGrip compound for a super-low rolling resistance, perfect for blasting over obstacles effortlessly. Technologies: Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Maxxis TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight. Maxxis Tubeless Ready tyres are the only Maxxis tyres approved for use with liquid sealants. Wide Trail (WT): This construction optimises the tyre tread layout and profile on today’s modern wide rims. Traditional tyres are designed around older, narrower rims and create and overly square tyre profile, leading to less than optimal performance. WT tyres obtain peak performance when used with an inner rim width of 35mm but are proven to perform exceptionally with rim widths from 30 - 35mm. EXO Protection: An extremely cut-resistant and abrasion-resistant material added to the sidewalls. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky, treacherous trails where the chance of sidewall cuts and abrasions is high. 3C Mountain: Maxxis 3C Triple Compound mountain technology uses a harder, longer lasting base layer and two progressively softer top layers in order to optimize traction and stability. Maxxis offers three different configurations of our 3C Triple Compound mountain technology: Maxx Speed, Maxx Terra and Maxx Grip. 3C MaxxGrip: 3C MaxxGrip uses the softest rubber compounds to offer the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications
The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering.
When you need the best all-around road tyre, there’s only one choice: the Hutchinson Fusion 5 Performance. Hutchinson measures its tyres on ride comfort, rolling resistance, grip, wear life, toughness, and weight, and the Performance is off the charts in every category. You get the same fast, grippy Eleven Storm compound as all Fusion 5 series tyres, paired with a more robust Kevlar Pro Tech flat protection layer. With unparalleled, uncompromising ride in our broadest size range, it’s a tyre for every road. The Hutchinson Fusion 5 Performance 11storm is a lightweight, performance-focused road racing tyre that's been designed to excel at competitive racing. It features Hutchinson's ElevenSTORM compound, which lowers rolling resistance across the board for a remarkable uphill speed advantage as well as a grippy all-around performance. The Performance version of the Fusion 5 family is the perfect harmony for all cyclists wishing to go fast and far. Associated with a Kevlar® reinforcement under the tread, it will reassure the most nervous and offer durability superior to 4,000 km. It offers the perfect compromise between performance and comfort, grip and durability.
This all-weather mountain bike tyre features an aggressive and generously spaced tread profile that bites firmly into the dirt and clears mud and debris efficiently. It features advanced tread-sipping and the exceptional Graphene 2.0 rubber compound for unmatched rolling performance, traction and reliability for DH and enduro riding in the most demanding conditions. Technologies: Graphene 2.0 Compound: Vittoria’s unique Graphene compound is superior in rolling performance, grip, traction and longevity. This compound provides the performance benefits required for competitive, consistent racing output. The Original Graphene Compound raised the bar for performance evenly through all disciplines, whereas Graphene 2.0 pin-points the performance requirements from each cycling discipline and enhances them for speed, grip, durability and puncture resistance. 4C Compound: Exclusively developed by Vittoria and achieves high-end performance. The 4C is a layering process using 4 separate rubber compounds within the same tread. The 4C construction provides unmatchable versatility in both the central and side tread areas. The finished product is extensively tested to ensure it meets the competition level performance that road and off-road cyclists demand, and benefits the rider significantly, providing better rolling efficiency, better grip and puncture protection. TNT: Vittoria TNT (Tube-No Tube) tyres are up to 100g lighter than standard tubeless tyres that others manufacture. However, they have exceptional reinforced sidewalls that provide massive cut resistance and puncture protection. TNT tyres offer better cornering stability, faster rolling and fewer pinchflats/burps when running at lower pressures.
The Maxxis Dissector EXO mountain bike (MTB) tyre features ramped blocks running along its centreline for a speedy feel, while the taller knobs on the edges deliver immense braking and cornering. The EXO puncture-protection sidewall and wide trail casing-optimisation make this a tough and protective choice of trail-ready tyre. Technologies: EXO: An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain bike tyres. 3CT Compound: The 3C MaxxTerra component is softer and offers more traction than 3C MaxxSpeed, but provides better tread wear and less rolling resistance than MaxxGrip. TR (Tubeless Ready) Technology: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Their TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight. Maxxis Tubeless Ready tyres are the only Maxxis tyres approved for use with liquid sealants.