Using a breathable 2.5-Layer waterproof fabric and a fully seam sealed construction gives the Xtract Jacket II effective performance when conditions are damp and showery. It's light weight construction make it an easy jacket to stow in a jersey pocket when weather conditions are fickle - sunshine one minute, a sharp shower the next. To help with stowage a stuff sack is included. So you don't overheat and get caught feeling cold and clammy, the breathable fabric gets help with moisture management thanks to centre back mesh vents that allows damp air to escape. Endura's standard fit provides space to easily pull the jacket on over thicker jerseys when the rain arrives, plus it gives you excellent mobility when you're in and out of the saddle.
The Xtract Bib Tights are constructed of a high-quality Roubaix fleece fabric, the brushed inner face is wonderfully soft against the skin and works to trap a layer of air inside the suit that is warmed by body heat as you ride. The Roubaix fabric is also remarkably stretchy so you'll enjoy an unrestricted feel as you pedal. The upper body also features an insulating supportive bib but its quick-wicking characteristics mean moisture and temperature regulation is also excellent. Silicone grippers keep the ankles in place. Endura's 400 series pad can be found providing support for short to medium distance rides. The moulded stretch pad is constructed using a plush microfibre face fabric for luxurious comfort with strategically positioned gel inserts providing shock absorption. An antibacterial and wicking finish plus a dimpled structure work together to improve comfort on pressure points and ensure you enjoy a fresh ride.
Thanks to a breathable 2.5-Layer waterproof fabric and fully seam-sealed construction, the Women's Xtract Jacket effective performance when conditions are damp and showery. It's lightweight too, making it an easy jacket to stow in a jersey pocket when weather conditions are fickle - sunshine one minute, a sharp shower the next. To help with stowage a stuff sack is included. So you don't overheat and get caught feeling cold and clammy, the breathable fabric gets help with moisture management thanks to centre back mesh vents. These allow damp air to escape, leaving your comfortable and dry. Endura's standard fit provides space to easily pull the jacket on over thicker jerseys when the rain arrives, plus it gives you excellent mobility when you're in and out of the saddle.
Replacement Race Face self-extracting puller cap.
BeElite Green Tea Extract 50mg – 30 CapsulesGreen tea has multiple health benefits and BeElite’s Green Tea Extract capsules contain an advanced formula of premium green tea. Green tea is high in polyphenols which can improve alertness and aid in fat burning.Directions for UseSwallow one capsule per day with water.For best results, take with a meal. Not to be taken on an empty stomach. Do not exceed the recommended dose. Use this product in conjunction with a balanced diet and not as a substitute for a balanced diet and a healthy lifestyle. Only suitable for over 18s. Should be kept out ofNutritional InformationIngredients: Bulking agent (Microcrystalline Cellulose); Capsule shell (hydroxypropylmethylcellulose); Green Tea extract; Anti-caking agent (Magnesium Stearate, Silicon Dioxide).FeaturesContains 30 capsulesAdvanced formula that utilises high-quality ingredientsGreen tea has been proven to provide multiple health benefitsSuitable for vegetarians and vegansBuy BeElite Vitamins and Supplements from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Crank ExtractorLifeLine crank extractor tool for removing standard Square Taper and ISIS type cranks.Features: Fits: Square Taper ISIS Cranks Buy LifeLine Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Chain Rivet Extractor The LifeLine Chain Rivet Extractor is a must for every home mechanic. Constructed from durable steel, this chain tool is small enough to take with you when you're on the move.Features: Durable steel construction Rubberised handles for grip Comes with one replacement splitting pin Adjustable chain support screw prevents damage to the chain and the tool Suitable for all chains from 6, 7, 8, 9 and 10 speed chains Instructions for proper use: Back off the handle to make room for the chain to be fitted to the tool Back off the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Turn the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool Repeat steps 5 and 6 until the two pins are aligned Now firmly tighten the handle to push the pin out, splitting the chain The only time you would use the front teeth on the tool is to loosen a tight link slightly - If you try to split a chain using them, you will break them off Buy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Chain Rivet Extractor The LifeLine Pro Chain Rivet Extractor is a must for every home mechanic. Constructed from heavy duty steel with strong rubberised grips, this chain tool is ideal for removing chain pins with complete confidence.Features: Durable steel construction Oversized plastic handles for grip and comfort Comes with one replacement splitting pin Adjustable chain support screw prevents damage to the chain and the tool Suitable for all chains from single-speed to derailleur type (5 - 11 speed) Adjustable locking barrel can be used to prevent pushing the chain right through and out the other side Instructions for proper use: Back off the handle to make room for the chain to be fitted to the tool Back off the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Turn the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool Repeat steps 5 and 6 until the two pins are aligned Now firmly tighten the handle to push the pin out, splitting the chain You can use the locking barrel to prevent pushing the chain pin right out of the other side. This makes it much easier to join a chain and push the pin back in again. (Note that you can only do this on certain types of chain - Check with the manufacturer for details) The only time you would use the front teeth on the tool is to loosen a tight link slightly - If you try to split a chain using them, you will break them off Buy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts Bearing Press & Extraction ToolPerfect for experienced home mechanics, the Bearing Press & Extraction Tool (BPET) will accurately install and remove frame linkage bearings. In addition, it can also be used for many types of pivot and hub bearings. (Adaptors and kits are being developed for hubs and pivot bearings)Instructions for UseFirstly, ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert/extract. You can identify which kit you need either by reading the bearing number written on the rubber seal, or you can measure the inner bore race and outer race of the bearing.NOTE: Extracting Bearings (RED adaptors) and Inserting Bearings (BLUE adaptors) - SOLD SEPARATELYFeatures: The BPET is only suitable for frames with flat surfaces to press against Ideal for the competent home mechanic who has reasonable knowledge and experience of working on bikes Designed to extract and insert linkage bearings Tool can also be used to press and extract bearings on hubs and freehub bodiesPlease Note: The handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment/incorrect installation.)Buy RapidRacerProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Xtract Bib TightsMade from only the very finest quality Roubaix fleece, the Xtract Bib Tights from Endura just feels great against the skin. It’s brushed inner face is beautifully soft, while also trapping your body heat as you ride to battle those cold winter winds on the road valiantly. A stretchy fit means you get complete freedom of movement and easy pedalling.Endura's 400 series pad can be found providing support for short to medium distance rides. The moulded stretch pad is constructed using a plush microfibre face fabric for luxurious comfort with strategically positioned gel inserts providing shock absorption. An antibacterial and wicking finish plus a dimpled structure work together to improve comfort on pressure points and ensure you enjoy a fresh ride.Features:Material: 82% Polyamide (Nylon), 18% CottonHigh stretch insulating durable Roubaix fleeceDurable stretch seat panel400 series antibacterial, multi-density gel pad with micro-wick technologySilicone leg grippersReflective trimBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
Endura Xtract Bib TightsMade from only the very finest quality Roubaix fleece, the Xtract Bib Tights from Endura just feels great against the skin. It’s brushed inner face is beautifully soft, while also trapping your body heat as you ride to battle those cold winter winds on the road valiantly. A stretchy fit means you get complete freedom of movement and easy pedalling.Endura's 400 series pad can be found providing support for short to medium distance rides. The moulded stretch pad is constructed using a plush microfibre face fabric for luxurious comfort with strategically positioned gel inserts providing shock absorption. An antibacterial and wicking finish plus a dimpled structure work together to improve comfort on pressure points and ensure you enjoy a fresh ride.Features:Material: 82% Polyamide (Nylon), 18% CottonHigh stretch insulating durable Roubaix fleeceDurable stretch seat panel400 series antibacterial, multi-density gel pad with micro-wick technologySilicone leg grippersReflective trimBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
Endura Xtract Bib TightsMade from only the very finest quality Roubaix fleece, the Xtract Bib Tights from Endura just feels great against the skin. It’s brushed inner face is beautifully soft, while also trapping your body heat as you ride to battle those cold winter winds on the road valiantly. A stretchy fit means you get complete freedom of movement and easy pedalling.Endura's 400 series pad can be found providing support for short to medium distance rides. The moulded stretch pad is constructed using a plush microfibre face fabric for luxurious comfort with strategically positioned gel inserts providing shock absorption. An antibacterial and wicking finish plus a dimpled structure work together to improve comfort on pressure points and ensure you enjoy a fresh ride.Features:Material: 82% Polyamide (Nylon), 18% CottonHigh stretch insulating durable Roubaix fleeceDurable stretch seat panel400 series antibacterial, multi-density gel pad with micro-wick technologySilicone leg grippersReflective trimBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.