The Slipstream Strada feature pre-cut cleat and heel openings making them usable without any need to cut yourself. Designed for three-season use you'll find their great in spring and autumn when conditions are cool but not freezing and will also add protection on a cool summer morning or evening. The embossed DeFeet logos infused with glass beads really catch the eye increasing low light visibility.
These Neoprene Nylon Overshoes are the middle member of the dhb overshoe family, providing protection against cold, wet weather. The 3mm neoprene is tough but stretchy, and when on, the fitting is snug and form-fitting. The durable, rear-entry, size 5, lockdown, YKK zip provides access to the shoe cover and makes it easy to slip on and off. Once the foot is in place and the heel adjusted to fit it can be zipped closed and secured with the Velcro top tab. The closed-cell neoprene structure means the material is wind and waterproof. Internally taped seams add strength to the waterproof seal. The underside of the overshoe features a robust Kevlar material, which is abrasion-resistant.
As recently as the late 1980’s, professional road cyclists would wear a pair of socks over their shoes while racing and training. If asked why they did this, they would answer "It’s warmer, more aerodynamic, keeps my shoes cleaner and looks better". Of course, one could argue that putting cotton socks over cycling shoes makes none of those possible. DeFeet crafted a solution that keeps windchill off the feet, creates smoother lines, keeps dirt out, looks better, and ultimately makes riders faster. Slipstream’s™ also last much longer than a pair of socks while barely costing more. Pay homage to the classic era of cycling, wear Slipstreams™ and go faster. PLEASE NOTE - A small hole is required to be cut for your shoe cleat - NOT waterproof, these overshoes are designed to reduce windchill - Low temperature wash only - Not suitable for tumble dryer use - This item comes as a pair
The Extreme Weather Neoprene Overshoes are the most protective of dhb's overshoe collection. The 3.5mm-thick neoprene provides the ultimate in insulation against both the cold and wet. Further protection comes via the TPU skin on the external face. This non-porous and flexible skin prevents rain from being absorbed into the surface of the overshoe. The underside of the overshoes feature a robust Kevlar material, extending around the toe and heel to prevent excessive wear when walking in the overshoes. The holes in the base for the cleats are shaped to fit snugly, minimising the amount of road spray entering the shoe from below. A durable, size 5, lockdown, YKK zip at the rear makes it easy to get them on and off.
These neoprene Toe Cover Overshoes are an essential piece of kit for riding when the weather's beginning to turn fresh. The open design means you can apply the cover and remove it easily, boosting climate control on longer rides. The neoprene fabric stretches around the shoe and covers the front end, which is the most exposed area to wind chill. Most cycle shoes have venting to allow hot air out the Toe Cover Overshoe blocks these holes and adds a barrier to keep the feet warm and comfortable. The neoprene is sandwiched between two layers of nylon stretch fabric, this face fabric helps protect the neoprene from scuffs and also makes them easy to put on.
The Aeron Neoprene Overshoes are built for performance. A slim construction and zipless design reduces bulk to keep you focused on the road. The front of the overshoe is constructed from 5mm-thick neoprene, providing hardy insulation and spray protection from the road. The ankle is 3mm neoprene to improve pedalling action. Fitting notes Sold as a pair, these overshoes are designed to be pulled on before your shoes. Pull the calf of the overshoe up and into position, taking care of the delicate neoprene. Put on your shoes. Then pull the toe of the overshoe over the end of your shoe, adjusting to ensure even coverage from heel to toe.
VeloToze have completely redesigned their road cycling shoe covers to make them more durable, easier to get on, and easier to care for. They are still made from the signature lightweight and waterproof material but are now reinforced on the bottom and in the toe area of the shoe covers so they are more durable and last longer. A special coating has been added to the inside of the covers so they're easier to dry and use again. We hope you are as excited about this update as we are! VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, veloToze Tall Shoe Covers will keep your feet dry, warm and comfortable. HOW TO FIT YOUR VELOTOZE OVERSHOES Due to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process. 1: Put on sock 2: Pull shoe cover/overshoe on over sock 3: Put foot through large cleat hole, and pull shoe cover up around ankle 4: Put on road bike shoe 5: Pull shoe cover down over heel of shoe FIRST, then toe 6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad. Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover. Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.
VeloToze have completely redesigned their road cycling shoe covers to make them more durable, easier to get on, and easier to care for. They are still made from the signature lightweight and waterproof material but are now reinforced on the bottom and in the toe area of the shoe covers so they are more durable and last longer. A special coating has been added to the inside of the covers so they're easier to dry and use again. We hope you are as excited about this update as we are! VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, veloToze Short Shoe Covers will keep your feet dry, warm and comfortable. HOW TO FIT YOUR VELOTOZE OVERSHOES Due to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process. 1: Put on sock and bike shoe 2: Pull shoe cover over toe of shoe 3: Then pull shoe cover over heel, being careful not to catch on cleats 4: Ensure no part of shoe covers are over cleats or heel pad. Pull shoe cover off of cleats and heel pad if necessary. CARE INSTRUCTIONS To clean shoe covers/overshoes, wipe with a cool, wet cloth. Do not put shoe covers in clothes washer. To dry, hang shoe covers/overshoes over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly. Do not put shoe covers/overshoes in clothes dryer. After repeated use, apply talcum or baby powder to inside of shoe cover/overshoe to prevent sticking TIPS To prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening. Avoid contact with sharp objects Do not store in direct sunlight
With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-Tip If water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions 1: Put on your socks 2: Pull the shoe cover/overshoes on over your socks first 3: Ensure closure at bottom of the shoe cover is open 4: Put on your cycling shoes 5: Stretch the cover over your shoes and close snap underneath 6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad. Care Instructions Hand wash with cold water, air dry. Do not bleach. Do not iron. Store out of direct sunlight.
As recently as the late 1980s, professional road cyclists would wear a pair of socks over their shoes while racing and training. Why did they do this? They would answer "It’s warmer, more aerodynamic, keeps my best shoes cleaner and looks better". Of course, one could argue that putting cotton socks over cycling shoes makes none of those possible. DeFeet crafted a solution that keeps windchill off the feet, creates smoother lines, keeps dirt out, looks better, and ultimately makes riders faster. Slipstream’s™ also last much longer than a pair of socks while barely costing more. And with the Reflective Stripe 4" Overshoes you'll be more noticeable on the road too. PLEASE NOTE - A small hole is required to be cut for your shoe cleat - NOT waterproof, these overshoes are designed to reduce windchill - Low temperature wash only - Not suitable for tumble dryer use - This item comes as a pair
Introducing the veloToze Waterproof Cuff designed to make neoprene cycling shoe covers more waterproof. It is made of a flexible, waterproof material that forms a seal with your leg to keep rain from entering the top of your shoe cover. It is designed to be used with the veloToze Neoprene Cycling Shoe Cover, but will work with most cycling shoe covers. Shoe cover not included. INSTRUCTIONS 1. Pull cuff on over shoe cover. 2. Place top of cuff against skin above shoe cover. Pull bottom of cuff down over top of shoe cover.
From the tyre spray off wet roads to a torrential and sudden rain shower, the GTX Overshoes will keep out rain and cold winds so as to ensure your feet enjoy the utmost comfort on the bike. Not just weather-protective, they're also breathable, preventing any sweat build-up from becoming an issue. A hook and loop closure at the back makes them easy to pull on and off. And with an open sole, it makes them suitable for almost any type of cycling or leisure shoes.