dhb Neoprene Nylon OvershoeUsing a 3mm stretch Neoprene the dhb Neoprene Nylon Overshoes are designed to provide wet weather protection. The tough and stretchy fabric provides a snug fit over shoes with a durable rear entry, size 5, lockdown YKK zip giving easy access.Made from closed cell foam the Neoprene traps thousands of gas bubbles providing insulation while the closed cell structure is also wind and waterproof. Internally taped seams add strength and maintain a waterproof seal. The neoprene is sandwiched between two layers of nylon stretch fabric protecting the neoprene from every-day use and scuffs. Robust Kevlar material is used on the underside of the cover, extending up around toe and heel areas, while robust binding helps maintain durability around the cleat holes. Reflective strips run vertically up the length of the rear ankle to improve your visibility to other road users when riding in reduced light conditions. A side logo adds a spark of reflective in low light conditions. Material: 63% Neoprene, 67% Polyamide(Nylon)3mm neoprene Waterproof, Windproof, InsulatingKevlar reinforced toes/heel/baseReflective rear detailDurable size5 YKK rear zipperdhb side logo detailBuy dhb Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
These Neoprene Nylon Overshoes are the middle member of the dhb overshoe family, providing protection against cold, wet weather. The 3mm neoprene is tough but stretchy, and when on, the fitting is snug and form-fitting. The durable, rear-entry, size 5, lockdown, YKK zip provides access to the shoe cover and makes it easy to slip on and off. Once the foot is in place and the heel adjusted to fit it can be zipped closed and secured with the Velcro top tab. The closed-cell neoprene structure means the material is wind and waterproof. Internally taped seams add strength to the waterproof seal. The underside of the overshoe features a robust Kevlar material, which is abrasion-resistant.
dhb Neoprene Nylon OvershoeUsing a 3mm stretch Neoprene the dhb Neoprene Nylon Overshoes are designed to provide wet weather protection. The tough and stretchy fabric provides a snug fit over shoes with a durable rear entry, size 5, lockdown YKK zip giving easy access.Made from closed cell foam the Neoprene traps thousands of gas bubbles providing insulation while the closed cell structure is also wind and waterproof. Internally taped seams add strength and maintain a waterproof seal. The neoprene is sandwiched between two layers of nylon stretch fabric protecting the neoprene from every-day use and scuffs. Robust Kevlar material is used on the underside of the cover, extending up around toe and heel areas, while robust binding helps maintain durability around the cleat holes. Reflective strips run vertically up the length of the rear ankle to improve your visibility to other road users when riding in reduced light conditions. A side logo adds a spark of reflective in low light conditions. Material: 63% Neoprene, 67% Polyamide(Nylon)3mm neoprene Waterproof, Windproof, InsulatingKevlar reinforced toes/heel/baseReflective rear detailDurable size5 YKK rear zipperdhb side logo detailBuy dhb Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Short Overshoes 2.0The VeloToze Short Overshoes 2.0 are more durable and easier to fit than their predecessors. A special coating has been added to the inside to make these version 2.0 shoe covers easier to dry out and use time and time again.VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Short Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock and bike shoe2: Pull shoe cover over toe of shoe3: Then pull shoe cover over heel, being careful not to catch on cleats4: Ensure no part of shoe covers are over cleats or heel pad. Pull shoe cover off of cleats and heel pad if necessary.CARE INSTRUCTIONSTo clean shoe covers/overshoes, wipe with a cool, wet cloth. Do not put shoe covers in the clothes washer.To dry, hang shoe covers/overshoes over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly. Do not put shoe covers/overshoes in the clothes dryer.After repeated use, apply talcum or baby powder to inside of shoe cover/overshoe to prevent stickingTIPSTo prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening. Avoid contact with sharp objectsDo not store in direct sunlightFeatures:Materials: 100% RubberWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Short Overshoes 2.0The VeloToze Short Overshoes 2.0 are more durable and easier to fit than their predecessors. A special coating has been added to the inside to make these version 2.0 shoe covers easier to dry out and use time and time again.VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Short Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock and bike shoe2: Pull shoe cover over toe of shoe3: Then pull shoe cover over heel, being careful not to catch on cleats4: Ensure no part of shoe covers are over cleats or heel pad. Pull shoe cover off of cleats and heel pad if necessary.CARE INSTRUCTIONSTo clean shoe covers/overshoes, wipe with a cool, wet cloth. Do not put shoe covers in the clothes washer.To dry, hang shoe covers/overshoes over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly. Do not put shoe covers/overshoes in the clothes dryer.After repeated use, apply talcum or baby powder to inside of shoe cover/overshoe to prevent stickingTIPSTo prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening. Avoid contact with sharp objectsDo not store in direct sunlightFeatures:Materials: 100% RubberWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
VeloToze have completely redesigned their road cycling shoe covers to make them more durable, easier to get on, and easier to care for. They are still made from the signature lightweight and waterproof material but are now reinforced on the bottom and in the toe area of the shoe covers so they are more durable and last longer. A special coating has been added to the inside of the covers so they're easier to dry and use again. We hope you are as excited about this update as we are! VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, veloToze Short Shoe Covers will keep your feet dry, warm and comfortable. HOW TO FIT YOUR VELOTOZE OVERSHOES Due to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process. 1: Put on sock and bike shoe 2: Pull shoe cover over toe of shoe 3: Then pull shoe cover over heel, being careful not to catch on cleats 4: Ensure no part of shoe covers are over cleats or heel pad. Pull shoe cover off of cleats and heel pad if necessary. CARE INSTRUCTIONS To clean shoe covers/overshoes, wipe with a cool, wet cloth. Do not put shoe covers in clothes washer. To dry, hang shoe covers/overshoes over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly. Do not put shoe covers/overshoes in clothes dryer. After repeated use, apply talcum or baby powder to inside of shoe cover/overshoe to prevent sticking TIPS To prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening. Avoid contact with sharp objects Do not store in direct sunlight
Velotoze Short Overshoes 2.0The VeloToze Short Overshoes 2.0 are more durable and easier to fit than their predecessors. A special coating has been added to the inside to make these version 2.0 shoe covers easier to dry out and use time and time again.VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Short Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock and bike shoe2: Pull shoe cover over toe of shoe3: Then pull shoe cover over heel, being careful not to catch on cleats4: Ensure no part of shoe covers are over cleats or heel pad. Pull shoe cover off of cleats and heel pad if necessary.CARE INSTRUCTIONSTo clean shoe covers/overshoes, wipe with a cool, wet cloth. Do not put shoe covers in the clothes washer.To dry, hang shoe covers/overshoes over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly. Do not put shoe covers/overshoes in the clothes dryer.After repeated use, apply talcum or baby powder to inside of shoe cover/overshoe to prevent stickingTIPSTo prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening. Avoid contact with sharp objectsDo not store in direct sunlightFeatures:Materials: 100% RubberWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Short Overshoes 2.0The VeloToze Short Overshoes 2.0 are more durable and easier to fit than their predecessors. A special coating has been added to the inside to make these version 2.0 shoe covers easier to dry out and use time and time again.VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Short Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock and bike shoe2: Pull shoe cover over toe of shoe3: Then pull shoe cover over heel, being careful not to catch on cleats4: Ensure no part of shoe covers are over cleats or heel pad. Pull shoe cover off of cleats and heel pad if necessary.CARE INSTRUCTIONSTo clean shoe covers/overshoes, wipe with a cool, wet cloth. Do not put shoe covers in the clothes washer.To dry, hang shoe covers/overshoes over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly. Do not put shoe covers/overshoes in the clothes dryer.After repeated use, apply talcum or baby powder to inside of shoe cover/overshoe to prevent stickingTIPSTo prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening. Avoid contact with sharp objectsDo not store in direct sunlightFeatures:Materials: 100% RubberWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura FS260 Pro Slick Overshoe Toe CoverSuper-compact toe cover in stretch waterproof PU fabric.Features:Super-compact toe covers - will fit easily into a jersey pocketStretch waterproof PU fabricReflective print on frontElasticated cuffCleat compatible soleConstruction: Nylon 67%, PU 23%, Elastane 10%Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
GripGrab have outdone themselves once again with the Primavera Midseason Cover Sock. Not only does it help keep your cycling shoes free from mud and spray, but it adds just enough insulation to the mix to keep the chill away from your feet during those early morning rides. They’re washable, easy to get on and off and feature two pre-cut cleat holes in the sole.
The close fitting 2mm neoprene forms an extra seal over the top of your shoe covers and tights/leg warmers to minimise water entering the overshoe. However, the flexibility of the neoprene still allows for a smooth pedal stroke. With the addition of reflective graphics you also get increased after dark visibility, the movement of your pedalling being more eye-catching to other road users.
Velotoze Short Overshoes 2.0The VeloToze Short Overshoes 2.0 are more durable and easier to fit than their predecessors. A special coating has been added to the inside to make these version 2.0 shoe covers easier to dry out and use time and time again.VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Short Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock and bike shoe2: Pull shoe cover over toe of shoe3: Then pull shoe cover over heel, being careful not to catch on cleats4: Ensure no part of shoe covers are over cleats or heel pad. Pull shoe cover off of cleats and heel pad if necessary.CARE INSTRUCTIONSTo clean shoe covers/overshoes, wipe with a cool, wet cloth. Do not put shoe covers in the clothes washer.To dry, hang shoe covers/overshoes over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly. Do not put shoe covers/overshoes in the clothes dryer.After repeated use, apply talcum or baby powder to inside of shoe cover/overshoe to prevent stickingTIPSTo prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening. Avoid contact with sharp objectsDo not store in direct sunlightFeatures:Materials: 100% RubberWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.