VeloToze Silicone Shoe CoversKeeping your feet warm and dry when cycling through cold, wet and wild weather, the sleek design of the VeloToze Silicone Shoe Covers does away with zippers to create an incredibly aero fit, while poppers below make it easier to get them on.With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-TipIf water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions1: Put on your socks2: Pull the shoe cover/overshoes on over your socks first3: Ensure closure at bottom of the shoe cover is open4: Put on your cycling shoes5: Stretch the cover over your shoes and close snap underneath6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad.Care InstructionsHand wash with cold water, air dry.Do not bleach. Do not iron.Store out of direct sunlight.FeaturesMaterials: 100% Silicone rubberWaterproof: silicone keeps your feet warm and dryWindproof: windproof materials keep your feet warm on a cold morning or winter ridesEasy to put on: snaps on below cycling shoeFlexible: silicone stretches and flexes with you as you rideDesigned for -5 C in dry, sunny weather to 15 C in wet, rainy weatherSold as a pairBuy VeloToze from Chain Reaction Cycles, the World's Largest Online Bike Store.
VeloToze Silicone Shoe CoversKeeping your feet warm and dry when cycling through cold, wet and wild weather, the sleek design of the VeloToze Silicone Shoe Covers does away with zippers to create an incredibly aero fit, while poppers below make it easier to get them on.With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-TipIf water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions1: Put on your socks2: Pull the shoe cover/overshoes on over your socks first3: Ensure closure at bottom of the shoe cover is open4: Put on your cycling shoes5: Stretch the cover over your shoes and close snap underneath6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad.Care InstructionsHand wash with cold water, air dry.Do not bleach. Do not iron.Store out of direct sunlight.FeaturesMaterials: 100% Silicone rubberWaterproof: silicone keeps your feet warm and dryWindproof: windproof materials keep your feet warm on a cold morning or winter ridesEasy to put on: snaps on below cycling shoeFlexible: silicone stretches and flexes with you as you rideDesigned for -5 C in dry, sunny weather to 15 C in wet, rainy weatherSold as a pairBuy VeloToze from Chain Reaction Cycles, the World's Largest Online Bike Store.
VeloToze Silicone Shoe CoversKeeping your feet warm and dry when cycling through cold, wet and wild weather, the sleek design of the VeloToze Silicone Shoe Covers does away with zippers to create an incredibly aero fit, while poppers below make it easier to get them on.With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-TipIf water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions1: Put on your socks2: Pull the shoe cover/overshoes on over your socks first3: Ensure closure at bottom of the shoe cover is open4: Put on your cycling shoes5: Stretch the cover over your shoes and close snap underneath6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad.Care InstructionsHand wash with cold water, air dry.Do not bleach. Do not iron.Store out of direct sunlight.FeaturesMaterials: 100% Silicone rubberWaterproof: silicone keeps your feet warm and dryWindproof: windproof materials keep your feet warm on a cold morning or winter ridesEasy to put on: snaps on below cycling shoeFlexible: silicone stretches and flexes with you as you rideDesigned for -5 C in dry, sunny weather to 15 C in wet, rainy weatherSold as a pairBuy VeloToze from Chain Reaction Cycles, the World's Largest Online Bike Store.
VeloToze Silicone Shoe CoversKeeping your feet warm and dry when cycling through cold, wet and wild weather, the sleek design of the VeloToze Silicone Shoe Covers does away with zippers to create an incredibly aero fit, while poppers below make it easier to get them on.With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-TipIf water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions1: Put on your socks2: Pull the shoe cover/overshoes on over your socks first3: Ensure closure at bottom of the shoe cover is open4: Put on your cycling shoes5: Stretch the cover over your shoes and close snap underneath6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad.Care InstructionsHand wash with cold water, air dry.Do not bleach. Do not iron.Store out of direct sunlight.FeaturesMaterials: 100% Silicone rubberWaterproof: silicone keeps your feet warm and dryWindproof: windproof materials keep your feet warm on a cold morning or winter ridesEasy to put on: snaps on below cycling shoeFlexible: silicone stretches and flexes with you as you rideDesigned for -5 C in dry, sunny weather to 15 C in wet, rainy weatherSold as a pairBuy VeloToze from Chain Reaction Cycles, the World's Largest Online Bike Store.
With their high-stretch silicone construction and zipperless design, the Silicone Shoe Covers offer outstanding protection from the rain. This also gives them their smooth, aerodynamic fit, ideal for racing and training. Not only waterproof, but they're also outstanding at keeping out wind too, making them just as good to wear in the dry as in the wet. The high degree of flexibility also ensures your pedal stroke is unhindered. Pro-Tip If water is entering through vent holes on the bottom of your shoe, remove the insole from the shoe and place tape or waterproof material over vent holes during the rainy season. Fitting Instructions 1: Put on your socks 2: Pull the shoe cover/overshoes on over your socks first 3: Ensure closure at bottom of the shoe cover is open 4: Put on your cycling shoes 5: Stretch the cover over your shoes and close snap underneath 6: Adjust around ankle, cleats and heel pad. Ensure no part of the shoe cover is over cleats or heel pad. Care Instructions Hand wash with cold water, air dry. Do not bleach. Do not iron. Store out of direct sunlight.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.