Northwave Extreme XC MTB ShoesThe Northwave Extreme XC MTB Shoes give you uncompromising race-tuned performance, with a snug, supportive upper matched to a super light and super-stiff 100% carbon fibre sole. The Extreme XC Shoes sit at the very peak of the Northwave performance off-road range. A super-light upper hugs your foot for incredible comfort and support across rough and technical trails. And to take on the rough and tumble of dirt, dust, mud, rocks and roots highly abrasion-resistant ultrathin reinforcements provide protection along the entire upper. Lastly, converting your hard-won fitness to rapid forward momentum is the super-stiff Hyperlight Michelin XC Sole.Hyperlight Michelin XC SoleMade from 100% unidirectional carbon fibre, the Hyperlight Michelin XC Sole is the highly tuned performance engine of the Extreme XCs. With a low weight and high stiffness rating, it offers optimal efficiency on the trails and incredible power transfers as you tackle stiff climbs and get into the flow of XC and cyclocross races.Michelin brings their Dual Layers Compound Technology to the sole too. The tread pattern uses a mix of soft and hard compounds for the best all-surface grip. The softer compound increases both traction and stability while the harder compound is tougher and more resistant, biting into loose ground and increasing durability.Experience XFrame 2® ExcellenceThe upper of the Extreme XCs benefit from Northwave's now improved XFrame 2® construction. This patented design wraps your foot to ensure the finest fit when you're applying the watts. No movement, just a secure and supportive hold with no pressure points.The integrated heel system, with a no-stitch heel design and inner heel grip material, provides a firm hold on the upstroke while saving weight thanks to the absence of a separate heel cup.Dual SLW 3 Closure SystemThe Dual SLW3 dial system, developed by X-Dial, builds and improves upon the previous iterations, making the fit and adjustment of your shoes quicker and easier than ever. It gives micrometric adjustment of the upper and lower foot, both to increase foothold and to release pressure. Twist to tighten. Press the side button to release pressure incrementally. All easily done on the go.A single button pull also makes it easy to release the laces at the end of your ride too. Quick. Simple, Durable. Precise. A no-fuss and comfortable fit every time.Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Patented XFrame 2® construction with perforated upperHighly abrasion-resistant ultrathin reinforcements ensure 360-degree protection along the entire upperHyperlight Michelin XC sole with a stiffness index of 14/15Double SLW3 dial, the only dial with step-by-step and full release in a single buttonIntegrated heel system containing directional fibre prevents any slippingNo-stitch heel design guarantees comfort and a second skin effectWeight: 312g (per shoe)2-bolt cleat compatible (cleats not supplied)Buy Northwave Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Transiro R3 Infinito ShoesThe Transiro R3 Infinito Shoes take the phrase ‘no time to waste’ and redefine it for athletes that are looking to shave vital seconds off their personal best. Fizik’s outstanding creation makes the transitional period between water and saddle effortless and utilises a simple pull look to the rear in order to help pull them on quickly.Now you’ve pulled the Transiro R3 Infinito Shoes on, it’s time to secure your fitting. Having conquered the quick foot entry the instep powerstrap locks in the wide-open positions in order to tighten the customised comfort. The volume control system brings a differentiated fit adjustment to the table and welcomes all shapes and sizes. The powerstrap works in tandem with the BOA dial to easily work the tightness of the Transiro R3 around your foot and the Infinito technology relieves tension and pressure hot spots via the textile webbing. Replacing plastic lace guiding, this closure system works around the larger area of the upper to pull it all together, acting as a closing envelope to secure your foot for a higher degree of comfort and balance.BreathabilityEliminating the build-up of perspiration from the first pedal until the last, the Transiro R3 Infinito Shoes fend off moisture and odours from those that really up the ante in the second stage. Wet feet from the swim won’t take control of your comfort levels and you can also go sockless in order to shorten your transition period. The shoes will quickly dry and wick while the mesh upper vents and maximises the flow of air around the foot.In order to start sweating you need to travel at pace though. The PU lamination directs each and every watt of power from your legs to the pedals for an explosive cadence and the R3 unidirectional full carbon outsole blasts riders away from their rivals to leave them in the best position possible for the running finale. Lightweight and intuitive, the Transiro R3 is a must for triathletes that crave perfection.Features:TRANSIRO: Triathlon series, designed for uncompromised cycling performance and efficient transitionsROAD: Designed and engineered to perform on paved roads, from the smoothest tarmac to the most demanding pavePU laminated mesh upper: enhanced ventilation with support where neededR3 full UD carbon outsole: highly stiff interface ideal for a direct power transferInstep Powerstrap: intuitive, quick and secure closureInfinito: advanced volume control of the forefoot areaVolume Control: independent fit adjustment for instep and forefootBOA IP1-BR3 outsole - full carbon unidirectionalWeight: 476g (size 42)Buy Fizik from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Transiro R3 Infinito ShoesThe Transiro R3 Infinito Shoes take the phrase ‘no time to waste’ and redefine it for athletes that are looking to shave vital seconds off their personal best. Fizik’s outstanding creation makes the transitional period between water and saddle effortless and utilises a simple pull look to the rear in order to help pull them on quickly.Now you’ve pulled the Transiro R3 Infinito Shoes on, it’s time to secure your fitting. Having conquered the quick foot entry the instep powerstrap locks in the wide-open positions in order to tighten the customised comfort. The volume control system brings a differentiated fit adjustment to the table and welcomes all shapes and sizes. The powerstrap works in tandem with the BOA dial to easily work the tightness of the Transiro R3 around your foot and the Infinito technology relieves tension and pressure hot spots via the textile webbing. Replacing plastic lace guiding, this closure system works around the larger area of the upper to pull it all together, acting as a closing envelope to secure your foot for a higher degree of comfort and balance.BreathabilityEliminating the build-up of perspiration from the first pedal until the last, the Transiro R3 Infinito Shoes fend off moisture and odours from those that really up the ante in the second stage. Wet feet from the swim won’t take control of your comfort levels and you can also go sockless in order to shorten your transition period. The shoes will quickly dry and wick while the mesh upper vents and maximises the flow of air around the foot.In order to start sweating you need to travel at pace though. The PU lamination directs each and every watt of power from your legs to the pedals for an explosive cadence and the R3 unidirectional full carbon outsole blasts riders away from their rivals to leave them in the best position possible for the running finale. Lightweight and intuitive, the Transiro R3 is a must for triathletes that crave perfection.Features:TRANSIRO: Triathlon series, designed for uncompromised cycling performance and efficient transitionsROAD: Designed and engineered to perform on paved roads, from the smoothest tarmac to the most demanding pavePU laminated mesh upper: enhanced ventilation with support where neededR3 full UD carbon outsole: highly stiff interface ideal for a direct power transferInstep Powerstrap: intuitive, quick and secure closureInfinito: advanced volume control of the forefoot areaVolume Control: independent fit adjustment for instep and forefootBOA IP1-BR3 outsole - full carbon unidirectionalWeight: 476g (size 42)Buy Fizik from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss M 1900 SP 30mm Mountain Bike Rear WheelReady for whatever the mountain can throw at you, the M 1900 straight pull (SP) 30mm rear mountain bike (MTB) wheel has a wide aluminium rim for use with today’s trend towards wider tyres. DT Swiss has created it to withstand the challenge of descending over technical terrain and to help you to maintain your line as you’re maintaining your speed.Fast Rolling and Disc Brake CompatibleKitted out with 28 DT Champion straight-pull spokes, the wheel rolls with optimum tension and toughness, with the hub acting as the ideal anchor for them. The hub itself ensures a smooth and reliable rotation and houses a freehub (various options available to select) for impressive power transfer as you ascend intimidating inclines and sprint on through singletracks. CenterLock disc brake-optimisation also improves confidence and control in all weathers, letting you ride as aggressively as you like. Coming tubeless-ready for superior grip, control and puncture protection with lower tyre pressures, the DT Swiss M 1900 SP 30mm Mountain Bike Rear Wheel is an excellent option for the adaptable off-road rider.Features: Rim Material: Aluminium Rim Type: Clincher Internal Rim Width: 30mm External Rim Width: 35mm Tubeless-Ready: Yes Spokes: DT Champion Straightpull Spoke Pattern: 3-cross lacing Spoke Nipples: DT ProLock Squorx ProHead aluminium nipples Freehub: Multiple options available to select from the drop down menu Axle Compatibility: Separate 12x142mm thru-axle or 12x148mm Boost options Disc Brake Standard: CenterLock Use: Cross Country (XC), All-Mountain (AM), Enduro Cassette Compatibility: SRAM XD Option: SRAM XD 11/12-Speed cassettes Shimano Option: 9,10 and 11-Speed Shimano type cassettes Shimano 12SP Option: Shimano Microspline 12-Speed cassettes only Recommended Maximum Rider Weight: 120kg Includes: Rear wheel, 32mm tubeless tape, 32mm tubeless valve, 6-bolt rotor mount adaptorBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Giro Vanquish MIPS Aero HelmetWhen vital seconds need to be trimmed off your personal best the Giro Vanquish MIPS Aero Helmet is all you need. Aerodynamically designed, it is the most technologically advanced road lid on the market combining comfort, performance and protection for your finest ride yet.Unrivalled PerformanceWith its streamlined airflow reducing drag and increasing aero, all eyes are on the clock to what is certain to be your quickest time yet. The Vanquish MIPS Aero sports the impressive TransformAir technology while the progressive layering in the EPS liner an extra layer of protection to your head. For those who want only the finest protection, Giro have deployed the MIPS system technology to reduce rotational forces that can result from impacts.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Shaping the wind for you, the Vanquish is ideal in any road scenario, be it a sprint or ironman endurance event. The four-piece polycarbonate hardlocking shell moulds your head in durable safety while you are kept cool via the RocLoc Air system that adds an extra level of cooling power to your ride. Working in tandem with antimicrobial padding, sweat and odours need not concern you anymore.Having already stamped its mark on the wind tunnel the Vanquish MIPS Aero Helmet is ready to turn the clocks back to help set your fastest time yet.Features:TransformAir TechnologyEPS liner with progressive layeringIntegrated MIPS TechnologyMagnetic Vivid shield by ZeissStealth shield dockEyeglass grippersAntimicrobial paddingFeatherweight webbingFour-piece polycarbonate interlocking Hardbody shellWind Tunnel ventilationShop all MIPS helmets - Click hereBuy Giro Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Bib Shorts (EGM Long)With optimal flexibility, excellent muscle support and a premium seat pad, the Endura Pro SL Bib Shorts (EGM Long) are made for performance-focused road cyclists. And the extra leg length is ideal for taller riders or those who prefer a longer cut. Combining the expertise of Pil Burt, a renowned physiotherapist and ergonomist, with Endura's own disruptive engineering approach catalyses the “Ergonomistry” concept. This has led to the creation of a family of high-performance ergonomically designed cycling products family, including the Endura Pro SL Bib Shorts (EGM). Performance-Focused FitComfort, flexibility and compressive support come by the way of an Italian 4-way stretch woven Power Lycra®. This makes the Pro SL 3 Bib Shorts ideally suited to riders seeking to tease out their very best performances in both training and racing. Complementing the technical fabric is Endura's carefully engineered multipanel, ergonomic fit. This gives the shorts a perfect fit when you drop low onto your bars and maintains the all-over compressive fit that works to push back fatigue. Locked in ComfortTo the upper body wide straps that cross over the back keep the shorts perfectly in place. A quick-wicking back yoke gives excellent breathability, preventing you from getting too hot and sweaty during harder efforts. A high-power lumbar panel also locks the short in place for an incredible level of comfort and support.The more aggressive tailored fit eliminates groin creasing and raw-edge leg hems, with silicone grippers incorporated, eliminating chafing and irritation.Men’s 800 Series Conform EGM (Eronomistry) PadUsing medical-grade silicone elastomer, most often found in prosthetics, the Men’s 800 Series Conform EGM (Eronomistry) Pad offers incredible levels of support and on-saddle comfort. The pad also makes use of a multi-density CVP (Continuously Variable Profile) foam construction, reducing pressure in key areas and ensuring there's no 'bottoming out' as you ride. The silicone elastomer layer is perforated, maintaining airflow and moisture management, keeping you dry and comfortable. Features:Materials: 72% Polyamide, 22% Elastane, 6% PolyesterHigh-quality Italian power Lycra® fabricMen’s 800 Series Conform EGM Pad with medical grade Elastomer technologyErgonomic, pre-shaped multi-panel constructionBib construction combining wide elastic straps and high-wicking rear yoke panelHigh-power, lumbar support panel keeps the short in placeRaw edge hem bands with inner silicone printed gripperLong leg version 4cm longer inseam than the standardBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Bib Shorts (EGM Long)With optimal flexibility, excellent muscle support and a premium seat pad, the Endura Pro SL Bib Shorts (EGM Long) are made for performance-focused road cyclists. And the extra leg length is ideal for taller riders or those who prefer a longer cut. Combining the expertise of Pil Burt, a renowned physiotherapist and ergonomist, with Endura's own disruptive engineering approach catalyses the “Ergonomistry” concept. This has led to the creation of a family of high-performance ergonomically designed cycling products family, including the Endura Pro SL Bib Shorts (EGM). Performance-Focused FitComfort, flexibility and compressive support come by the way of an Italian 4-way stretch woven Power Lycra®. This makes the Pro SL 3 Bib Shorts ideally suited to riders seeking to tease out their very best performances in both training and racing. Complementing the technical fabric is Endura's carefully engineered multipanel, ergonomic fit. This gives the shorts a perfect fit when you drop low onto your bars and maintains the all-over compressive fit that works to push back fatigue. Locked in ComfortTo the upper body wide straps that cross over the back keep the shorts perfectly in place. A quick-wicking back yoke gives excellent breathability, preventing you from getting too hot and sweaty during harder efforts. A high-power lumbar panel also locks the short in place for an incredible level of comfort and support.The more aggressive tailored fit eliminates groin creasing and raw-edge leg hems, with silicone grippers incorporated, eliminating chafing and irritation.Men’s 800 Series Conform EGM (Eronomistry) PadUsing medical-grade silicone elastomer, most often found in prosthetics, the Men’s 800 Series Conform EGM (Eronomistry) Pad offers incredible levels of support and on-saddle comfort. The pad also makes use of a multi-density CVP (Continuously Variable Profile) foam construction, reducing pressure in key areas and ensuring there's no 'bottoming out' as you ride. The silicone elastomer layer is perforated, maintaining airflow and moisture management, keeping you dry and comfortable. Features:Materials: 72% Polyamide, 22% Elastane, 6% PolyesterHigh-quality Italian power Lycra® fabricMen’s 800 Series Conform EGM Pad with medical grade Elastomer technologyErgonomic, pre-shaped multi-panel constructionBib construction combining wide elastic straps and high-wicking rear yoke panelHigh-power, lumbar support panel keeps the short in placeRaw edge hem bands with inner silicone printed gripperLong leg version 4cm longer inseam than the standardBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Bib Shorts (EGM Long)With optimal flexibility, excellent muscle support and a premium seat pad, the Endura Pro SL Bib Shorts (EGM Long) are made for performance-focused road cyclists. And the extra leg length is ideal for taller riders or those who prefer a longer cut. Combining the expertise of Pil Burt, a renowned physiotherapist and ergonomist, with Endura's own disruptive engineering approach catalyses the “Ergonomistry” concept. This has led to the creation of a family of high-performance ergonomically designed cycling products family, including the Endura Pro SL Bib Shorts (EGM). Performance-Focused FitComfort, flexibility and compressive support come by the way of an Italian 4-way stretch woven Power Lycra®. This makes the Pro SL 3 Bib Shorts ideally suited to riders seeking to tease out their very best performances in both training and racing. Complementing the technical fabric is Endura's carefully engineered multipanel, ergonomic fit. This gives the shorts a perfect fit when you drop low onto your bars and maintains the all-over compressive fit that works to push back fatigue. Locked in ComfortTo the upper body wide straps that cross over the back keep the shorts perfectly in place. A quick-wicking back yoke gives excellent breathability, preventing you from getting too hot and sweaty during harder efforts. A high-power lumbar panel also locks the short in place for an incredible level of comfort and support.The more aggressive tailored fit eliminates groin creasing and raw-edge leg hems, with silicone grippers incorporated, eliminating chafing and irritation.Men’s 800 Series Conform EGM (Eronomistry) PadUsing medical-grade silicone elastomer, most often found in prosthetics, the Men’s 800 Series Conform EGM (Eronomistry) Pad offers incredible levels of support and on-saddle comfort. The pad also makes use of a multi-density CVP (Continuously Variable Profile) foam construction, reducing pressure in key areas and ensuring there's no 'bottoming out' as you ride. The silicone elastomer layer is perforated, maintaining airflow and moisture management, keeping you dry and comfortable. Features:Materials: 72% Polyamide, 22% Elastane, 6% PolyesterHigh-quality Italian power Lycra® fabricMen’s 800 Series Conform EGM Pad with medical grade Elastomer technologyErgonomic, pre-shaped multi-panel constructionBib construction combining wide elastic straps and high-wicking rear yoke panelHigh-power, lumbar support panel keeps the short in placeRaw edge hem bands with inner silicone printed gripperLong leg version 4cm longer inseam than the standardBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Orra Aero Carbon Gravel HandlebarFeaturing a T800 unidirectional (UD) carbon build, this gravel focused drop handlebar provides a fantastic combination of stiffness, durability and low weight performance to get your through every adventure. Thanks to its carbon construction that's Kevlar infused with the palm areas on the tops of drops, it delivers added strength and rigidity to provide you with reliable steering on demanding mixed terrains. Prime has also ensured that this model is built for long days in the saddle by kitting it out with comfortable geometry that includes an 18 degree flare, so you can benefit from increased support and positioning as you clock up the miles. Coming complete with a fibre painted finish including the clamp and stem clamping area, this handlebar provides improved grip for dependable steering wherever your next gravel adventure takes you.The new Orra bar is more compliant on a downward force to give increased comfort on gravel roads and improves stiffness on the up stroke and reverse angle to give better power transfer when climbing.Features: Material: T800 Unidirectional (UD) Carbon Use: Gravel Drop: 114mm Reach: 76.5mm Flare: 18 degrees Down Sweep: 4 degrees Forward Sweep: 7 degrees Width measured centre to centre Weight: 238g (42cm option)Technologies: Stand internal routing or full internal routing options (di2 compatible). T800 Unidirectional carbon (Kevlar infused with the palm areas on the tops of drops for added strength and rigidity). 31.8mm clamping bore. Width measured centre to centre 4 degrees down sweep on the bar to give compliance on rough roads/gravel tracks but offers stiffness when on the drops applying power. 7 degrees forward sweep, gives a more relaxed position for the wrists improving comfort over longer rides. Flat aero top sections for better ergonomics and comfort. Sculpted palm area on the top of the drops to ease pressure and spread weight load when in the hoods. Fibre painted including clamp and stem clamping area for improved grip.Buy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Bib Shorts (EGM Long)With optimal flexibility, excellent muscle support and a premium seat pad, the Endura Pro SL Bib Shorts (EGM Long) are made for performance-focused road cyclists. And the extra leg length is ideal for taller riders or those who prefer a longer cut. Combining the expertise of Pil Burt, a renowned physiotherapist and ergonomist, with Endura's own disruptive engineering approach catalyses the “Ergonomistry” concept. This has led to the creation of a family of high-performance ergonomically designed cycling products family, including the Endura Pro SL Bib Shorts (EGM). Performance-Focused FitComfort, flexibility and compressive support come by the way of an Italian 4-way stretch woven Power Lycra®. This makes the Pro SL 3 Bib Shorts ideally suited to riders seeking to tease out their very best performances in both training and racing. Complementing the technical fabric is Endura's carefully engineered multipanel, ergonomic fit. This gives the shorts a perfect fit when you drop low onto your bars and maintains the all-over compressive fit that works to push back fatigue. Locked in ComfortTo the upper body wide straps that cross over the back keep the shorts perfectly in place. A quick-wicking back yoke gives excellent breathability, preventing you from getting too hot and sweaty during harder efforts. A high-power lumbar panel also locks the short in place for an incredible level of comfort and support.The more aggressive tailored fit eliminates groin creasing and raw-edge leg hems, with silicone grippers incorporated, eliminating chafing and irritation.Men’s 800 Series Conform EGM (Eronomistry) PadUsing medical-grade silicone elastomer, most often found in prosthetics, the Men’s 800 Series Conform EGM (Eronomistry) Pad offers incredible levels of support and on-saddle comfort. The pad also makes use of a multi-density CVP (Continuously Variable Profile) foam construction, reducing pressure in key areas and ensuring there's no 'bottoming out' as you ride. The silicone elastomer layer is perforated, maintaining airflow and moisture management, keeping you dry and comfortable. Features:Materials: 72% Polyamide, 22% Elastane, 6% PolyesterHigh-quality Italian power Lycra® fabricMen’s 800 Series Conform EGM Pad with medical grade Elastomer technologyErgonomic, pre-shaped multi-panel constructionBib construction combining wide elastic straps and high-wicking rear yoke panelHigh-power, lumbar support panel keeps the short in placeRaw edge hem bands with inner silicone printed gripperLong leg version 4cm longer inseam than the standardBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Orra Aero Carbon Gravel HandlebarFeaturing a T800 unidirectional (UD) carbon build, this gravel focused drop handlebar provides a fantastic combination of stiffness, durability and low weight performance to get your through every adventure. Thanks to its carbon construction that's Kevlar infused with the palm areas on the tops of drops, it delivers added strength and rigidity to provide you with reliable steering on demanding mixed terrains. Prime has also ensured that this model is built for long days in the saddle by kitting it out with comfortable geometry that includes an 18 degree flare, so you can benefit from increased support and positioning as you clock up the miles. Coming complete with a fibre painted finish including the clamp and stem clamping area, this handlebar provides improved grip for dependable steering wherever your next gravel adventure takes you.The new Orra bar is more compliant on a downward force to give increased comfort on gravel roads and improves stiffness on the up stroke and reverse angle to give better power transfer when climbing.Features: Material: T800 Unidirectional (UD) Carbon Use: Gravel Drop: 114mm Reach: 76.5mm Flare: 18 degrees Down Sweep: 4 degrees Forward Sweep: 7 degrees Width measured centre to centre Weight: 238g (42cm option)Technologies: Stand internal routing or full internal routing options (di2 compatible). T800 Unidirectional carbon (Kevlar infused with the palm areas on the tops of drops for added strength and rigidity). 31.8mm clamping bore. Width measured centre to centre 4 degrees down sweep on the bar to give compliance on rough roads/gravel tracks but offers stiffness when on the drops applying power. 7 degrees forward sweep, gives a more relaxed position for the wrists improving comfort over longer rides. Flat aero top sections for better ergonomics and comfort. Sculpted palm area on the top of the drops to ease pressure and spread weight load when in the hoods. Fibre painted including clamp and stem clamping area for improved grip.Buy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Bib Shorts (EGM Long)With optimal flexibility, excellent muscle support and a premium seat pad, the Endura Pro SL Bib Shorts (EGM Long) are made for performance-focused road cyclists. And the extra leg length is ideal for taller riders or those who prefer a longer cut. Combining the expertise of Pil Burt, a renowned physiotherapist and ergonomist, with Endura's own disruptive engineering approach catalyses the “Ergonomistry” concept. This has led to the creation of a family of high-performance ergonomically designed cycling products family, including the Endura Pro SL Bib Shorts (EGM). Performance-Focused FitComfort, flexibility and compressive support come by the way of an Italian 4-way stretch woven Power Lycra®. This makes the Pro SL 3 Bib Shorts ideally suited to riders seeking to tease out their very best performances in both training and racing. Complementing the technical fabric is Endura's carefully engineered multipanel, ergonomic fit. This gives the shorts a perfect fit when you drop low onto your bars and maintains the all-over compressive fit that works to push back fatigue. Locked in ComfortTo the upper body wide straps that cross over the back keep the shorts perfectly in place. A quick-wicking back yoke gives excellent breathability, preventing you from getting too hot and sweaty during harder efforts. A high-power lumbar panel also locks the short in place for an incredible level of comfort and support.The more aggressive tailored fit eliminates groin creasing and raw-edge leg hems, with silicone grippers incorporated, eliminating chafing and irritation.Men’s 800 Series Conform EGM (Eronomistry) PadUsing medical-grade silicone elastomer, most often found in prosthetics, the Men’s 800 Series Conform EGM (Eronomistry) Pad offers incredible levels of support and on-saddle comfort. The pad also makes use of a multi-density CVP (Continuously Variable Profile) foam construction, reducing pressure in key areas and ensuring there's no 'bottoming out' as you ride. The silicone elastomer layer is perforated, maintaining airflow and moisture management, keeping you dry and comfortable. Features:Materials: 72% Polyamide, 22% Elastane, 6% PolyesterHigh-quality Italian power Lycra® fabricMen’s 800 Series Conform EGM Pad with medical grade Elastomer technologyErgonomic, pre-shaped multi-panel constructionBib construction combining wide elastic straps and high-wicking rear yoke panelHigh-power, lumbar support panel keeps the short in placeRaw edge hem bands with inner silicone printed gripperLong leg version 4cm longer inseam than the standardBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Orra Aero Carbon Gravel HandlebarFeaturing a T800 unidirectional (UD) carbon build, this gravel focused drop handlebar provides a fantastic combination of stiffness, durability and low weight performance to get your through every adventure. Thanks to its carbon construction that's Kevlar infused with the palm areas on the tops of drops, it delivers added strength and rigidity to provide you with reliable steering on demanding mixed terrains. Prime has also ensured that this model is built for long days in the saddle by kitting it out with comfortable geometry that includes an 18 degree flare, so you can benefit from increased support and positioning as you clock up the miles. Coming complete with a fibre painted finish including the clamp and stem clamping area, this handlebar provides improved grip for dependable steering wherever your next gravel adventure takes you.The new Orra bar is more compliant on a downward force to give increased comfort on gravel roads and improves stiffness on the up stroke and reverse angle to give better power transfer when climbing.Features: Material: T800 Unidirectional (UD) Carbon Use: Gravel Drop: 114mm Reach: 76.5mm Flare: 18 degrees Down Sweep: 4 degrees Forward Sweep: 7 degrees Width measured centre to centre Weight: 238g (42cm option)Technologies: Stand internal routing or full internal routing options (di2 compatible). T800 Unidirectional carbon (Kevlar infused with the palm areas on the tops of drops for added strength and rigidity). 31.8mm clamping bore. Width measured centre to centre 4 degrees down sweep on the bar to give compliance on rough roads/gravel tracks but offers stiffness when on the drops applying power. 7 degrees forward sweep, gives a more relaxed position for the wrists improving comfort over longer rides. Flat aero top sections for better ergonomics and comfort. Sculpted palm area on the top of the drops to ease pressure and spread weight load when in the hoods. Fibre painted including clamp and stem clamping area for improved grip.Buy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Bib Shorts (EGM Long)With optimal flexibility, excellent muscle support and a premium seat pad, the Endura Pro SL Bib Shorts (EGM Long) are made for performance-focused road cyclists. And the extra leg length is ideal for taller riders or those who prefer a longer cut. Combining the expertise of Pil Burt, a renowned physiotherapist and ergonomist, with Endura's own disruptive engineering approach catalyses the “Ergonomistry” concept. This has led to the creation of a family of high-performance ergonomically designed cycling products family, including the Endura Pro SL Bib Shorts (EGM). Performance-Focused FitComfort, flexibility and compressive support come by the way of an Italian 4-way stretch woven Power Lycra®. This makes the Pro SL 3 Bib Shorts ideally suited to riders seeking to tease out their very best performances in both training and racing. Complementing the technical fabric is Endura's carefully engineered multipanel, ergonomic fit. This gives the shorts a perfect fit when you drop low onto your bars and maintains the all-over compressive fit that works to push back fatigue. Locked in ComfortTo the upper body wide straps that cross over the back keep the shorts perfectly in place. A quick-wicking back yoke gives excellent breathability, preventing you from getting too hot and sweaty during harder efforts. A high-power lumbar panel also locks the short in place for an incredible level of comfort and support.The more aggressive tailored fit eliminates groin creasing and raw-edge leg hems, with silicone grippers incorporated, eliminating chafing and irritation.Men’s 800 Series Conform EGM (Eronomistry) PadUsing medical-grade silicone elastomer, most often found in prosthetics, the Men’s 800 Series Conform EGM (Eronomistry) Pad offers incredible levels of support and on-saddle comfort. The pad also makes use of a multi-density CVP (Continuously Variable Profile) foam construction, reducing pressure in key areas and ensuring there's no 'bottoming out' as you ride. The silicone elastomer layer is perforated, maintaining airflow and moisture management, keeping you dry and comfortable. Features:Materials: 72% Polyamide, 22% Elastane, 6% PolyesterHigh-quality Italian power Lycra® fabricMen’s 800 Series Conform EGM Pad with medical grade Elastomer technologyErgonomic, pre-shaped multi-panel constructionBib construction combining wide elastic straps and high-wicking rear yoke panelHigh-power, lumbar support panel keeps the short in placeRaw edge hem bands with inner silicone printed gripperLong leg version 4cm longer inseam than the standardBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Bib Shorts (EGM Long)With optimal flexibility, excellent muscle support and a premium seat pad, the Endura Pro SL Bib Shorts (EGM Long) are made for performance-focused road cyclists. And the extra leg length is ideal for taller riders or those who prefer a longer cut. Combining the expertise of Pil Burt, a renowned physiotherapist and ergonomist, with Endura's own disruptive engineering approach catalyses the “Ergonomistry” concept. This has led to the creation of a family of high-performance ergonomically designed cycling products family, including the Endura Pro SL Bib Shorts (EGM). Performance-Focused FitComfort, flexibility and compressive support come by the way of an Italian 4-way stretch woven Power Lycra®. This makes the Pro SL 3 Bib Shorts ideally suited to riders seeking to tease out their very best performances in both training and racing. Complementing the technical fabric is Endura's carefully engineered multipanel, ergonomic fit. This gives the shorts a perfect fit when you drop low onto your bars and maintains the all-over compressive fit that works to push back fatigue. Locked in ComfortTo the upper body wide straps that cross over the back keep the shorts perfectly in place. A quick-wicking back yoke gives excellent breathability, preventing you from getting too hot and sweaty during harder efforts. A high-power lumbar panel also locks the short in place for an incredible level of comfort and support.The more aggressive tailored fit eliminates groin creasing and raw-edge leg hems, with silicone grippers incorporated, eliminating chafing and irritation.Men’s 800 Series Conform EGM (Eronomistry) PadUsing medical-grade silicone elastomer, most often found in prosthetics, the Men’s 800 Series Conform EGM (Eronomistry) Pad offers incredible levels of support and on-saddle comfort. The pad also makes use of a multi-density CVP (Continuously Variable Profile) foam construction, reducing pressure in key areas and ensuring there's no 'bottoming out' as you ride. The silicone elastomer layer is perforated, maintaining airflow and moisture management, keeping you dry and comfortable. Features:Materials: 72% Polyamide, 22% Elastane, 6% PolyesterHigh-quality Italian power Lycra® fabricMen’s 800 Series Conform EGM Pad with medical grade Elastomer technologyErgonomic, pre-shaped multi-panel constructionBib construction combining wide elastic straps and high-wicking rear yoke panelHigh-power, lumbar support panel keeps the short in placeRaw edge hem bands with inner silicone printed gripperLong leg version 4cm longer inseam than the standardBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Bib Shorts (EGM Long)With optimal flexibility, excellent muscle support and a premium seat pad, the Endura Pro SL Bib Shorts (EGM Long) are made for performance-focused road cyclists. And the extra leg length is ideal for taller riders or those who prefer a longer cut. Combining the expertise of Pil Burt, a renowned physiotherapist and ergonomist, with Endura's own disruptive engineering approach catalyses the “Ergonomistry” concept. This has led to the creation of a family of high-performance ergonomically designed cycling products family, including the Endura Pro SL Bib Shorts (EGM). Performance-Focused FitComfort, flexibility and compressive support come by the way of an Italian 4-way stretch woven Power Lycra®. This makes the Pro SL 3 Bib Shorts ideally suited to riders seeking to tease out their very best performances in both training and racing. Complementing the technical fabric is Endura's carefully engineered multipanel, ergonomic fit. This gives the shorts a perfect fit when you drop low onto your bars and maintains the all-over compressive fit that works to push back fatigue. Locked in ComfortTo the upper body wide straps that cross over the back keep the shorts perfectly in place. A quick-wicking back yoke gives excellent breathability, preventing you from getting too hot and sweaty during harder efforts. A high-power lumbar panel also locks the short in place for an incredible level of comfort and support.The more aggressive tailored fit eliminates groin creasing and raw-edge leg hems, with silicone grippers incorporated, eliminating chafing and irritation.Men’s 800 Series Conform EGM (Eronomistry) PadUsing medical-grade silicone elastomer, most often found in prosthetics, the Men’s 800 Series Conform EGM (Eronomistry) Pad offers incredible levels of support and on-saddle comfort. The pad also makes use of a multi-density CVP (Continuously Variable Profile) foam construction, reducing pressure in key areas and ensuring there's no 'bottoming out' as you ride. The silicone elastomer layer is perforated, maintaining airflow and moisture management, keeping you dry and comfortable. Features:Materials: 72% Polyamide, 22% Elastane, 6% PolyesterHigh-quality Italian power Lycra® fabricMen’s 800 Series Conform EGM Pad with medical grade Elastomer technologyErgonomic, pre-shaped multi-panel constructionBib construction combining wide elastic straps and high-wicking rear yoke panelHigh-power, lumbar support panel keeps the short in placeRaw edge hem bands with inner silicone printed gripperLong leg version 4cm longer inseam than the standardBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Bib Shorts (EGM Long)With optimal flexibility, excellent muscle support and a premium seat pad, the Endura Pro SL Bib Shorts (EGM Long) are made for performance-focused road cyclists. And the extra leg length is ideal for taller riders or those who prefer a longer cut. Combining the expertise of Pil Burt, a renowned physiotherapist and ergonomist, with Endura's own disruptive engineering approach catalyses the “Ergonomistry” concept. This has led to the creation of a family of high-performance ergonomically designed cycling products family, including the Endura Pro SL Bib Shorts (EGM). Performance-Focused FitComfort, flexibility and compressive support come by the way of an Italian 4-way stretch woven Power Lycra®. This makes the Pro SL 3 Bib Shorts ideally suited to riders seeking to tease out their very best performances in both training and racing. Complementing the technical fabric is Endura's carefully engineered multipanel, ergonomic fit. This gives the shorts a perfect fit when you drop low onto your bars and maintains the all-over compressive fit that works to push back fatigue. Locked in ComfortTo the upper body wide straps that cross over the back keep the shorts perfectly in place. A quick-wicking back yoke gives excellent breathability, preventing you from getting too hot and sweaty during harder efforts. A high-power lumbar panel also locks the short in place for an incredible level of comfort and support.The more aggressive tailored fit eliminates groin creasing and raw-edge leg hems, with silicone grippers incorporated, eliminating chafing and irritation.Men’s 800 Series Conform EGM (Eronomistry) PadUsing medical-grade silicone elastomer, most often found in prosthetics, the Men’s 800 Series Conform EGM (Eronomistry) Pad offers incredible levels of support and on-saddle comfort. The pad also makes use of a multi-density CVP (Continuously Variable Profile) foam construction, reducing pressure in key areas and ensuring there's no 'bottoming out' as you ride. The silicone elastomer layer is perforated, maintaining airflow and moisture management, keeping you dry and comfortable. Features:Materials: 72% Polyamide, 22% Elastane, 6% PolyesterHigh-quality Italian power Lycra® fabricMen’s 800 Series Conform EGM Pad with medical grade Elastomer technologyErgonomic, pre-shaped multi-panel constructionBib construction combining wide elastic straps and high-wicking rear yoke panelHigh-power, lumbar support panel keeps the short in placeRaw edge hem bands with inner silicone printed gripperLong leg version 4cm longer inseam than the standardBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Fortus 26 MTB Front WheelBuilt to handle the toughest cross country (XC), enduro and trail bike routes on the planet, the Fortus 26 Mountain Bike (MTB) Front Wheel has a super-strong 6061 T6 Aluminium rim and spins on Hope’s bombproof Pro 4 hub. The rim is 26mm wide internally, so you can fit up to 2.5” wide tyres for terrain taming grip. It’s also tubeless compatible for running lower tyre pressures and increased puncture protection. Hope has also finished it off with Sapim Race double-butted Stainless-Steel spokes, which increase the responsiveness and lifespan of the wheel.Features: Rim Material: Welded 6061 T6 Aluminium rim with eyelets Rim Internal Width: 26mm Rim External Width: 31mm Rim Height: 20mm Tubeless-Ready: Yes Hub Type: Hope Pro 4 Brake Disc Mount Type: 6-Bolt Axle Type: Separate 15x100mm or 15x100mm (Boost) options Quick Release: Yes (on 15x100mm option only) Brake Type: Disc Spoke Type: Sapim Race, double-butted Stainless-Steel, J-Bend Spoke Count: 32 Spoke Nipple Tyre: Silver coloured Brass nipples Use: Enduro, Trail, Cross Country (XC) Recommended Tyre Widths: 2.25-2.5" Included: Fortus 26 front wheel 28mm rim tape Tubeless valve Wipe 100mm and Boost 110mm options are supplied with 15mm end caps Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Suntour Epicon RL-R CTS Air ForkFeaturing rock-solid aluminium stanchions, this trail-ready suspension fork offers an excellent balance of stiffness and durability as you tackle demanding terrain conditions. RockShox has also equipped this model with magnesium lower legs for a superior strength-to-weight ratio, so you can enjoy maximum toughness without any unnecessary excess grams. Another highlight is its hollow aluminium crown, which allows for further weight savings.Remote Speed Lock with Rebound Damping Adjust (RL-R Cartridge)This race-proven cartridge contains Lockout and rebound adjust in one unit. It offers a drastic improvement of riding efficiency & adjustability for cross country & trail ride. The rebound adjust knob is made out of forged alloy and features a light index feeling for easy and sure operation.Please note: A remote is not included but is available separately.Features: Stanchions Material: Aluminium Lower Legs Material: Magnesium Crown Material: Hollow Aluminium Use: Mountain Bike (MTB), Cross Country (XC) Axle: 9mm Quick Release (QR) Steerer Diameter: 1 1/8 - 1.5" tapered (CTS) Travel: 140mm Spring Type: Air Spring Damper: RL-R Cartridge (Remote Speed Lock with Rebound Damping Adjust) Brake Type: Disc brake Remote Included: No, available separatelyBuy Suntour Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Fortus 26 MTB Front WheelBuilt to handle the toughest cross country (XC), enduro and trail bike routes on the planet, the Fortus 26 Mountain Bike (MTB) Front Wheel has a super-strong 6061 T6 Aluminium rim and spins on Hope’s bombproof Pro 4 hub. The rim is 26mm wide internally, so you can fit up to 2.5” wide tyres for terrain taming grip. It’s also tubeless compatible for running lower tyre pressures and increased puncture protection. Hope has also finished it off with Sapim Race double-butted Stainless-Steel spokes, which increase the responsiveness and lifespan of the wheel.Features: Rim Material: Welded 6061 T6 Aluminium rim with eyelets Rim Internal Width: 26mm Rim External Width: 31mm Rim Height: 20mm Tubeless-Ready: Yes Hub Type: Hope Pro 4 Brake Disc Mount Type: 6-Bolt Axle Type: Separate 15x100mm or 15x100mm (Boost) options Quick Release: Yes (on 15x100mm option only) Brake Type: Disc Spoke Type: Sapim Race, double-butted Stainless-Steel, J-Bend Spoke Count: 32 Spoke Nipple Tyre: Silver coloured Brass nipples Use: Enduro, Trail, Cross Country (XC) Recommended Tyre Widths: 2.25-2.5" Included: Fortus 26 front wheel 28mm rim tape Tubeless valve Wipe 100mm and Boost 110mm options are supplied with 15mm end caps Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.