A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
Helmets have long been plagued by an unspoken rule: Light weight ventilation aerodynamics—pick two there's your helmet. As you can tell by now though we don't play by these rules—or really any for that matter. We'd rather turn standards on their head and create products that nobody ever dreamed of. And you needn't look any further than the new S-Works Evade helmet for proof of this. Straight up it's the fastest road helmet out there. Beginning with the aerodynamic development we basically lived in our Win Tunnel to create this Evade. Having our own wind tunnel allows us to develop our products with aero at the forefront of the design rather than merely testing them there. With this we carefully analysed every aspect of helmet performance in the Win Tunnel and with real world testing to ensure that we left no stone unturned in the quest for performance. This makes for a helmet that has countless testing hours and years of development and ultimately this adds up to the fastest road helmet we’ve ever tested. We not only took grams out of the drag but we did it without sacrificing safety. In fact we switched the construction to favour our Energy Optimized Multi-Density EPS that optimizes the foam type in different places. As far as ventilation is concerned free-flowing air through the helmet not only makes the helmet cooler than ever but it also decreases aerodynamic drag. Going hand-in-hand with this ventilation and aerodynamics were both optimized in the Win Tunnel together making for the best combination of aerodynamics and ventilation out there. Now the exterior vents and interior channels have been carefully considered to make sure that the helmet draws in the maximum amount of air through the helmet for extreme cooling. And the result? The new Evade is just as cool as a bare head with no helmet making it the coolest aero helmet on the market today. Through this work the Evade saves 50 seconds over 40km versus a traditional road helmet and roughly six seconds over the prior iteration of Evade. This means that it's not only as cool as a bare head but also as fast. For road race helmets there’s nothing that can match this performance. Our new ANGI Crash Sensor gives you and your loved ones peace of mind like never before—when combined with our iOS or Android app the sensor will detect a crash and send a text message to specified contacts in your phone. It also syncs with our app and STRAVA® to provide GPS-based activity tracking. Last but most certainly not least a fast helmet is useless unless it fits correctly. With this in mind the new S-Works Evade has all the features you'd expect from a top-level helmet like our Mindset HairPort 2 fit system with micro-adjustments our soft webbing that won't stretch out and a new Gutter Action brow pad that manages sweat to keep it out of your eyes. And to top it off we've added a new magnetic buckle to the mix that makes buckling with one hand a breeze. Through extensive Win Tunnel development the Evade is the fastest road helmet we've tested. 4th Dimension Cooling System with deep internal channels large vents and aligned exhaust ports make it the best combination of aerodynamics and ventilation. Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. Patented Aramid-Reinforced Skeleton provides internal EPS support to help manage impact energy. Ultra-light Mindset HairPort II micro-dial fit system with height adjustability for the perfect fit. Gutter Action brow pad design for increased comfort and sweat management. Thin soft and lightweight 4X DryLite webbing won’t stretch out with sweat or water. Tri-Fix web splitter for improved comfort and ease of strap adjustments. Instrap webbing system for ultra-light construction and security. MIPS-equipped. Integrated ANGI crash sensor. Magnetic buckle is simple and secure. Magnetic buckle is simple and secure.
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 280g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: stamped stainless steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Special edition colours: Silver/Black You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Take the performance and Body Geometry ergonomics of our high-end road shoes put them in an affordable design and you basically have the Torch 1.0 Road shoes. For the closure we added a single lightweight Boa® L6 dial that features tool-free snap replacement capability while also providing simple on-the-fly micro-adjustments. Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power increase efficiency and reduce chance of injury by optimizing hip knee and foot alignment. With a 6.0 Stiffness index the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. Lightweight Boa® L6 Fit System for on-the-fly micro-adjustment backed by the Boa Guarantee. Synthetic upper with for supple feel over the foot. Reflective heel elements increase your visibility to motorists in low-light conditions. Three-bolt cleat pattern fits all major road pedals. Approximate weight: 290g (1/2 pair Size 42)
Standard threaded MTB bottom bracket - compatible with 24/22 mm axlesServiceable double lip sealed Enduro bearingsUSA machined aluminium shell for superior function and durabilityEnglish threadBlack anodized
Engineered to be the perfect ebike shoe with maximum pedalling efficiency and walking comfort Lace closure with Mini Power Strap for a secure fit Breathable upper material for all-day comfort Toe box protection and reflective details for rider safety 3-PART PROPRIETARY SOLE CONSTRUCTION 1) POWER TRANSFER BLADE Semi-rigid midsole plate for more efficient and comfortable pedalling Reduce power loss by up to 50% compared to non-cycling shoes 2) ADAPTIVE CONTROL 360° traction with Shimano-developed block pattern engineered to interface with wide variety of pedal cages and pins 3) TRACTION CONTROL Smooth curved trekking outsole design supports a natural heel strike and foot roll Toe and heel block pattern designed to offer optimum traction on variable terrain Weight: 357g (size 42) Stiffness rating: 3
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 428g per pair Platform: Two piece aluminium + composite Wings: Stamped steel Spring: 300 series stainless steel Spindle: Forged scm435 chromoly steel Inner bearing: Bushing Outer bearing: Cartridge Traction pins: 8mm adjustable
Winter can provide some of the most epic riding days with cool crisp air and snow dusted trails. Reset the thermostat with the MT500 Freezing Point Trousers and make even the coldest winter day a riding day. Multi-fabric InsulationBeat the cold with Primaloft® Gold Active Insulation panels on the front thigh. Rear waterproof spray panels keep this critical area dry whilst C0 DWR sheds off the worst of the rest of the water encountered whilst riding your bike. All of this combined with stretch thermal softshell fabric on the back leg gives you unrestricted movement allowing you to tackle the toughest winter trails. Primaloft Gold Active InsulationPrimaloft® Gold Active insulation boasts class leading warmth to weight ratio tiny pack size water-repellency 4 way stretch and superb breathability making it the ultimate insulation for on-bike-wear. Key Benefits Fleece backed softshell construction Insulated PrimaLoft® GOLD panels for extra warmth Zip fly with popper closure Stretch wicking waistband with internal silicone grip and Velcro® adjusters Large thigh vents for effective temperature regulation Two zipped hand pockets Abrasion resistant crank guard on inner ankles 90 Day Satisfaction Guarantee
THE CONFIDENCE TO TAME RUGGED TERRAIN The women’s Ranger™ W is an XC-style shoe offering the same supportive fit and rugged durability found in our premium shoes. It features a stout nylon and rubber co-molded outsole for efficient pedaling with impressive durability grip and traction in rocks and mud. The upper combines supple synthetic fiber with mesh panels for increased breathability fast dry times and light weight. Three wide straps allow easy fit adjustments and a supportive EVA footbed enhances comfort whether you’re chasing your personal best or simply out to enjoy the trail with friends. UPPER: Classic 3-strap closure One-piece Synchwire™ upper with thermo-bonded exo-structure Rubber reinforced heel and toe sections Reflective heel tab OUTSOLE: Co-molded nylon and rubber high-traction lugged outsole Mid-foot scuff guard Accommodates steel toe spikes FOOTBED: Die-cut EVA footbeds WEIGHT: 310 grams (size 39)
XT trekking SPDs are designed for recreational riders who commute and tour. This XT trekking pedal combines SPD mechanism on one side and a stable platform pedal body and pins on the other you can ride with cleats or normal shoes. SPD has low profile platform height with large platform contact area for excellent support and stability Lightweight and high performance using a forged alloy body and chrome-moly axle 8 mm hex wrench mounting system Sealed cartridge axle system for reliability and simplified low maintenance Easy entry system with tension adjustment provides plenty of support and holds the cleat firmly in place Built in reflectors Includes SM-SH56 multi release cleat Weight: 392 grams per pair
The ARMEGA offers unparalleled dominance for the modern racer: bringing ULTRA HD lens clarity to motocross. Experience definition and subtlety never before viewed through the lens of a goggle. Add to that our proprietary HiPER contrast-enhancing lens technology and you'll feel the depth of terrain as you're commanding past it. This premium technology is injection-molded into a shatterproof lens that boasts an enhanced field of vision and impact protection. The 6-point locking-tab integration secures the lens and works in unison with a quick-change system enabling you to switch between lenses with a couple of simple clicks. A bonded dual-injected frame incorporates a next generation sweat management system that collects sweat as your ride intensifies and forces it away from the lens and out of the goggle through an integrated channel in the frame. Force air intakes in the frame promote increased airflow to ensure fog-free vision despite heated efforts overcoming sub-par competition. Want a goggle designed to give it 100% deep in the battlegrounds of motocross? Look no further than the ARMEGA. Ultra HD: Revolutionizing motocross vision technology. Our signature 100% ULTRA HD lenses are the result of decades of passion design craftsmanship and research. Through extensive development and testing we've engineered category defining technology bringing unmatched optical clarity to motocross. As the lens of choice for the worlds best racers ULTRA HD integrates with a shatterproof and impact resistant polycarbonate material molded specifically for zero optical distortion. The result is a lens that's engineered to maximize protection while maintaining the clearest most accurate vision on the track. FEATURES Category defining ULTRA HD lens provides unmatched optical clarity. Quick-release system offers simple lens changing capability. Force air intake ports increase circulation and maximize humidity evacuation. Injection-molded 2mm impact-rated shatter-resistant lens. Removable nose guard for extra deflection against roost and debris. Bonded dual-injection frame construction maximizes strength and durability. 6-point locking tabs integrate with quick-change system maximizing lens retention. Perforated triple-layer face foam manages sweat and increases ventilation. Contouring compression seal technology to keep goggles in place. Next generation sweat collection management and drainage system. Ultra-wide 48mm strap with thick silicone bead for maximum grip.
CASUAL VIBES WITH CONFIDENT GRIP The design brief was clear: Create a comfortable capable flat pedal shoe with the grip and support that recreational adventure and e-bike riders need to be confident over all kinds of terrain. The Tracker™ Fastlace fits on all points. It starts by putting the foot closer to the pedal and features a flat profile for an optimal contact patch with the pedal surface and pins. A dual-layer EVA midsole provides comfort for off the bike hikes. Finally the Tack™ Rubber outsole’s highly elastic compound allows it to stretch and form around pedal pins for excellent grip while riding rough rugged terrain making the Tracker Fastlace an ideal shoe for everyday rides and epic adventures. UPPER Textile upper Thermo-bonded PU overlays CLOSURE Single-pull Fastlace system with cordlock high-friction laces and lace keeper FOOTBED Die-cut footbed OUTSOLE Tack™ Rubber outsole Dual-layer EVA Gamma tread design optimized for pedal pins CLEAT COMPATIBILITY Flat pedal only / no cleat WEIGHT 359 grams (size 43) SIZING 39 – 50 whole sizes only
Size specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details Optimal surface area Minimal profile 16mm thin 10 adjustable pins per side for grip Premium bearings & seal system Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu) Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu) Specs adjustable pins 10 per side body material A380 Aluminum endcap T15 footprint small size footprint large size 100mm x 100mm 114mm x 111m inner bearing type Igus Bearing max rider weight No restriction outer bearing type Double Cartridge Bearing shoe size US 5-10 // EU 37-43 spindle material Forged SCM 415 Chromoly Steel warranty 5 years weight small weight large 439g per pair 494g per pair
CASUAL VIBES WITH CONFIDENT GRIP The design brief was clear: Create a comfortable capable flat pedal shoe with the grip and support that recreational adventure and e-bike riders need to be confident over all kinds of terrain. The women’s Tracker™ W Fastlace fits on all points. It starts by putting the foot closer to the pedal and featuring a flat profile for an optimal contact patch with the pedal surface and pins. A dual-layer EVA midsole provides comfort for off the bike hikes. Finally the Tack™ Rubber outsole’s highly elastic compound allows it to stretch and form around pedal pins for excellent grip while riding rough rugged terrain making the Tracker Fastlace an ideal shoe for everyday rides and epic adventures. UPPER Textile upper Thermo-bonded PU overlays CLOSURE Single-pull Fastlace System with cordlock high-friction laces and lace keeper FOOTBED Die-cut footbed OUTSOLE Tack™ Rubber outsole Dual-layer EVA Gamma tread design optimized for pedal pins CLEAT COMPATIBILITY Flat pedal only / no cleat WEIGHT 323 grams (size 39) SIZING Women’s 36 – 43 whole sizes only
A HYBRID MTB CYCLING GILET THAT DELIVERS TARGETED WARMTH THROUGH RECYCLED INSULATION Designed and constructed to offer excellent core warmth the Altura Esker Dune Insulted Pertex™ Men's Cycling Gilet combines recycled Pertex™ Quantum™ Eco outer windproof fabric with recycled insulation made from post consumer PET. The brush back softshell fabric in the rest of this hybrid gilet also has excellent thermal properties and advanced breathability through its technical knit construction to prevent hot spots. There is a versatile two way zip making the gilet easy to remove when the temperature rises and a zipped chest pocket to keep personal belongings easily accessible. FEATURES Pertex™ Quantum™ Eco windproof outer shell fabric DWR coating to repel water Insulation made from recycled post-consumer PET 2 way front zip Zipped chest pocket High collar for extra warmth Relaxed fit COMPOSITIONMain 1 - 100% PolyesterMain 2 - Face - 90% Polyester 10% Elastane Back - 100% PolyesterInsulation - 100% Polyester
The Barstow fuses vintage moto design with modern styling and technology resulting in a timeless look with next level performance. FEATURES Frame: Minimal frame design works in union with distinct lens shape to increase visibility. Strap: Premium strap trim elevates performance and adds rich detail. Foam: Triple-layer face foam provides excellent moisture management. Lens: Anti-fog polycarbonate lens with integrated pins for seamless tear off application. Vents: Upper vents force air in and channel out moisture to reduce fogging. In the box: Extra clear lens and microfibre bag.
The Barstow fuses vintage moto design with modern styling and technology resulting in a timeless look with next level performance. FEATURES Frame: Minimal frame design works in union with distinct lens shape to increase visibility. Strap: Premium strap trim elevates performance and adds rich detail. Foam: Triple-layer face foam provides excellent moisture management. Lens: Anti-fog polycarbonate lens with integrated pins for seamless tear off application. Vents: Upper vents force air in and channel out moisture to reduce fogging. In the box: Extra clear lens and microfibre bag.
The Barstow fuses vintage moto design with modern styling and technology resulting in a timeless look with next level performance. FEATURES Frame: Minimal frame design works in union with distinct lens shape to increase visibility. Strap: Premium strap trim elevates performance and adds rich detail. Foam: Triple-layer face foam provides excellent moisture management. Lens: Anti-fog polycarbonate lens with integrated pins for seamless tear off application. Vents: Upper vents force air in and channel out moisture to reduce fogging. In the box: Extra clear lens and microfibre bag.
The Barstow fuses vintage moto design with modern styling and technology resulting in a timeless look with next level performance. FEATURES Frame: Minimal frame design works in union with distinct lens shape to increase visibility. Strap: Premium strap trim elevates performance and adds rich detail. Foam: Triple-layer face foam provides excellent moisture management. Lens: Anti-fog polycarbonate lens with integrated pins for seamless tear off application. Vents: Upper vents force air in and channel out moisture to reduce fogging. In the box: Extra clear lens and microfibre bag.