The Yoof 20 has been designed from the ground up specifically to suit the smaller rider thats not quite big enough for a regular 20 BMX but a bit too big for a bike with 18 wheels. The Yoof 20 features a smaller frame, bars and cranks to best fit the smaller rider. This BMX also benefits from a forged 1 piece crankset, 25t-9t gearing, a 9t cassette hub and a low stand over height. One of the most affordable 20" wheel bikes available and great value for money. ###section### Product Specs FRAME MATERIAL: Hi Ten Steel WHEEL SIZE: 20" TOP TUBE LENGTH: 18.5" CHAIN STAY LENGTH: HEADTUBE ANGLE: SEAT TUBE ANGLE: FORKS: Hi-Ten Steel BARS: 7" Hi Ten Steel STEM: Alloy Top Load HEADSET: Sealed Aheadset BRAKE MOUNTS: Welded U-Brake BRAKES: U-Brake FRONT HUB: Looseball FRONT RIM: Single Wall Alloy REAR HUB: 9t Sealed Cassette Hub REAR RIM: Single Wall Alloy TYRES: Innova Street 2.2" SPROCKET: 25t Steel CRANKS: 1pc Forged Crankset BB: Looseball USA PEDALS: Platform Plastic SEAT: Padded Combo GEARING: 25/9 WEIGHT: 23.38lbs ###section### Product Highlights Full Size Bike with a Shorter Top Tube and geometry to Suit riders who are 4ft - 5ft 4" / 120cm -160cm A great all rounder suitable for any type of riding Strong Hi-ten steel construction U-brake system on welded mounts Great quality BMX bike for riders on a budget ###shogun-image-section###
Basic cassette wheel from Salt. The Rookie rear wheel features a semi sealed cassette that is laced to the salt salt 6061 T6 alloy rim ###section### Product Specs WHEEL SIZE:20" HUB:Semi Sealed 9t Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Right Hand Side RIM:Salt AM Single Wall SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1324g
The Merritt Battle Freecoaster uses a traditional clutch style system paired with the 9T Diamond Driver (the driver comes with a lifetime guarantee). The driver replaces the small bearings, the most common source of failure in freecoasters, with polymer bushings along its entire length. The hub shell is super slim and CNC’d 6061 aluminum with a hollow chromoly axle. The hub comes set with maximum slack (we recommend running it like this) but adjustment washers are included to reduce slack if desired. The Battle Freecoaster is laced to The Battle Rim, The Battle Rim steps away from the low profile trend we’ve been seeing in BMX with some taller sidewalls to give the rim a little more beef. The Battle rim is made from 6061-aluminum with a 39mm width and a welded seam to ensure strength. It’s a double wall rim and it has a beefy ridge in the middle to help prevent spokes from blowing out. Available in RHD and LHD. ###section### Product Specs WHEEL SIZE:20" HUB:Merritt Battle Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Merrit Battle Rim SPOKES:Butted NIPPLES:Brass WEIGHT:1090g / 38.4oz E3
A serious piece of kit, the Reason is draped in quality from head to toe. Featuring a full 4130 chromoly frame with a modern 76 degree headtube and super short 12.75” chainstay, the Reason now comes with shorter 160mm cranks and a steeper 15mm offset fork making it truly ride like the same bikes Wethepeople pro’s Felix Prangenberg and Dan Kruk are riding right now. Amongst the huge list of aftermarket parts is the Salt Pro freecoaster hub and some of the latest Wethepeople aftermarket products, making this incredible street machine is a true weapon. ###section### Product Specs FRAME MATERIAL: 4130 Chromoly WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 12.75" HEADTUBE ANGLE: 76° SEAT TUBE ANGLE: 71° FORKS: SALTPLUS "REASON" fork, 4130 full crmo, butted crmo steerer, 15mm offset BARS: WETHEPEOPLE "REASON" bar, 4pc, 4130 full crmo STEM: SALT “ZION” top loading stem, 50mm reach HEADSET: SALT “PRO” int. headset, sealed bearing BRAKE MOUNTS: Removable BRAKES: ÉCLAT "TALON" alloy u-brake-rear FRONT HUB: SALT “PRO” hub, sealed bearing, 3/8”s axle, 36h FRONT RIM: SALT "VALON” 36mm single wall rim, 36h REAR HUB: SALT “PRO” hub, sealed bearing, 3/8”s axle, 36h REAR RIM: SALTPLUS “SUMMIT” 36mm double wall rim, 36h TYRES: WETHEPEOPLE "ACTIVATE" tires, 2.35", 60PSI , front & rear SPROCKET: WETHEPEOPLE "PARAGON" sprocket & nylon guard, 6061-T6 alloy, 25t CRANKS: SALT “REVO” square profile, 3pc 4130 crmo, 160mm, 8 spline BB: SALT “MID” 19mm, press fit, sealed bearing PEDALS: WETHEPEOPLE “LOGIC”, nylon/fiberglass pedals SEAT: ECLAT "BIOS" fat padded Pivotal seat (subject to change) GEARING: 25/9 WEIGHT: 12.33kg / 27.20lbs - without brakes, with pegs ###section### Product Highlights Great for riders who are between 5ft and 6ft tall (150cm - 180cm) Designed to excel at Street riding thanks to responsive geometry but will feel at home in any riding environment High-quality Chromoly construction Sealed bearings throughout Great for grinding (Pegs Included) ###shogun-image-section###
Pre-Built wheel from Verde. This front wheel uses a double walled aluminum Verde regent rim laced into a low flange sealed bearing hub with 10mm male chromoly axle ###section### Product Specs WHEEL SIZE: 20" HUB: Verde Sealed AXLE: Male RIM: Double Wall SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 919g / 32.4oz
The Stranger Crux front wheel features a sealed female hub laced to a double wall pinned seamed rim ###section### Product Specs WHEEL SIZE: 20" HUB: Stranger Sealed AXLE: Female RIM: Stranger Double Wall Pinned SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 1049g / 37oz
Basic 20" Front wheel from Salt. The Rookie front wheel features a looseball hub that is laced to the Salt 6061 T6 alloy rim. ###section### Product Specs WHEEL SIZE: 20" HUB: Salt Rookie Loose Ball AXLE: 10mm Male RIM: Salt AM Single wall SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 946g / 34.03oz
A complete street ready front wheel built around the Front Street Pro hub and made up of all top spec BSD parts, the exact same tried and tested wheels that the BSD team uses without the hassle of building them. Included Jersey Barrier hubguards. BSD Front Street Pro hub. BSD NASA rim. 186mm BSD spokes. 4 cross spoke lacing pattern. BSD rim tape. ###section### Product Specs WHEEL SIZE: 20" HUB: BSD Front Street Pro Front Hub AXLE: Female RIM: BSD Aero Pro Rim SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 1100g
This Jet BMX Bike is the most affordable full size 20" BMX we currently offer, and with everything it has on it it's a perfect entry level bike. It's packed full of features like the Hi-ten 20.25" top tube frame, 8" high steel bars, 3-piece forged cranks with sealed mid BB, 9t sealed cassette hub, padded seat and post combo and so much more. It's unheard of to get 3-piece cranks, sealed hubs and bearings at this price point - all of these things mean the bike is lighter, stronger and harder wearing than parts normally found at this price. ###section### Product Specs FRAME MATERIAL: Hi Ten Steel WHEEL SIZE: 20" TOP TUBE LENGTH: 20.25" CHAIN STAY LENGTH: 13.5" HEADTUBE ANGLE: SEAT TUBE ANGLE: FORKS: Hi-Ten Steel BARS: 8" Hi Ten Steel STEM: Alloy Top Load HEADSET: 1 1/8 Aheadset BRAKE MOUNTS: Welded U-Brake BRAKES: U-Brake FRONT HUB: Looseball FRONT RIM: Single Wall Alloy REAR HUB: 14mm Sealed 9t Cassette Hub REAR RIM: Single Wall Alloy TYRES: Innova Street 2.25" SPROCKET: 25t Steel CRANKS: 3-piece Chromoly 170mm BB: Sealed Mid PEDALS: Platform Plastic SEAT: Padded Combo GEARING: 25/9 WEIGHT: 25.4lbs ###section### Product Highlights Full size Bike with a shorter Top Tube and geometry to suit riders who are 4ft - 5ft 4"/120cm -160cm A great all rounder suitable for any type of riding Sealed rear hub Popular first BMX bike Strong and durable crankset ###shogun-image-section###
Pre-built BMX wheel from Federal using their stance front hub laced with double butted spokes into a stance XL rim . Come with guards ###section### Product Specs WHEEL SIZE: 20" HUB: Federal Stance AXLE: Female RIM: Federal Stance XL SPOKES: Butted NIPPLES: Brass WEIGHT: 1009g
United's Pre-Built BMX front wheel. This is the same high quality wheel which can be found on United's Supreme Complete bikes. The wheel uses a sealed bearing, low flange hub with 10mm female bolts and is laced into a wide profile double wall alloy rim. ###section### Product Specs WHEEL SIZE: 20" HUB: Supreme Hub AXLE: Female RIM: Double Wall Pinned SPOKES: Straight Gauge NIPPLES: Alloy WEIGHT: 955g / 33.68oz
Affordable but very well spec'd rear cassette wheel from Jet BMX. This Wheel uses a fully sealed 9t Cassette hub with a solid 14mm male axle laced onto a single wall 6061 aluminium rim with black spokes. RHD Only An Ideal wheel to upgrade or replace your current complete bike wheel ###section### Product Specs WHEEL SIZE:20" HUB:Fully Sealed 9t Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Right Hand Side RIM:6061 Alloy Single Wall SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:TBC
The Splendor seat features a four-panel cover design and a very minimal custom diamond shaped Pivotal patch on top. The faux leather fabric is durable and features complimenting embroidered logos on the side and rear panels and is available in two color options. This seat also features extra thick foam padding and uses the traditional Pivotal system.
Basic brake lever available in left & right hand side options, perfect to replace a broken lever on a complete bike. Weight: 70g (0.15lb / 2.47oz).
Bearings. Coloured cone spacers and spacer to fit Mid BB frames. Also fits Profile cups to work as a replacement set of bearings for US BB. Fits 19mm crank axles.
Full rear brake kit from from Jet BMX. Contains everything you need to add a rear brake onto your bike. The lever & brake is made from Cast 6061 alloy. Cable, straddle, triange and all other parts included to fit onto your bike.
The Rant Party On V2 Front Wheel has an improved, flatter and wider front hub with cones that are designed to accept the slide on plastic Rant Party Guards. Spec'd with smooth rolling sealed bearings, tough double wall Rant Squad rim and 14 gauge spokes. This wheel makes a great replacement or upgrade.
The Stranger Crux V2 freecoaster wheel features a sealed 14mm female RHD freecoaster hub laced to the Crux XL double wall pinned seamed rim. ###section### Product Specs WHEEL SIZE:20" HUB:Sealed Freecoaster 9t AXLE:Female Bolts DRIVE SIDE:Right Side Drive RIM:Stranger Crux XL SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1536g
Complete front wheel from Federal using their Stance Pro front hub laced with double butted spokes into a Stance XL rim. Includes hub guards. ###section### Product Specs WHEEL SIZE: 20" HUB: Federal Stance Pro AXLE: 10mm RIM: Federal Stance XL SPOKES: Double Butted NIPPLES: Brass WEIGHT: TBC
U-brake from Jet BMX. The Jet BMX U-brake is made from 6061-T6 casted alloy and is compatible with rear brake mounts. Includes brake pads and all required hardware bolts etc.