Super light nickel plated single speed race chain from KMC. Pin length: 7.7 mm, super light, 320 grams.
The most Extravagant Wheel options we could create are now available as an instant custom! This wheel consists of a Profile Z Coaster Male rear hub with optional Titanium axle upgrade & 9t Titanium Driver upgrade. Laced onto a Cinema 888 rim using Rainbow Titanium Source BMX spokes with Brass nipples. The Titanium Driver/Axle options will need to be Added to your basket as this will affect your total price. The Weight saving on this wheel when using all of the Titanium spokes & hub upgrades works out roughly 220grams / 7.7oz lighter than standard chromoly. ###section### Product Specs WHEEL SIZE:20" HUB:Profile Zcoaster Freecoaster AXLE:14mm Male DRIVE SIDE:Right Side Drive RIM:Cinema 888 SPOKES:Titanium NIPPLES:Brass WEIGHT:1276g / 2.81lbs
Quick realease seat post clamp from S&M. Available to fit either a 25.4mm or 27.2mm or seat post.
24" wheelset from Fit Bikes featuring fully sealed hubs front and rear laced to light and strong Fit double wall ims. ###section### Product Specs WHEEL SIZE:24" HUB:Fully Sealed AXLE: DRIVE SIDE:RHD RIM:36H double wall SPOKES:TBC NIPPLES:TBC WEIGHT:TBC
These hubs are based around the previous top selling stance hub but now feature oversized bearings and taller flanges which help to create a more robust and stiffer wheel. Supplied with hub guards. ###section### Product Specs AXLE SIZE: 10mm SPOKE HOLES: 36 BEARINGS: Sealed WEIGHT: TBC
Stealth Pivotal system from Federal with faux leather side panels with tough canvas top panel ###section### Product Specs TYPE: Pivotal PADDING: Mid WEIGHT: TBC
Basic 18" Front wheel from Salt. The Rookie front wheel features a looseball hub that is laced to the Salt 6061 T6 alloy rim ###section### Product Specs WHEEL SIZE: 18" HUB: Salt Rookie Loose Ball AXLE: 10mm Male RIM: Salt AM Single wall SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 786g / 27.72oz
Basic 16" Front wheel from Salt. The Rookie front wheel features a looseball hub that is laced to the Salt 6061 T6 alloy rim. ###section### Product Specs WHEEL SIZE: 16" HUB: Salt Rookie Loose Ball AXLE: 10mm Male RIM: Salt AM Single wall SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 786g / 27.72oz
Pivotal seat from Stranger. Features a 3-piece tear-resistant cover with sublimated tie dye print ###section### Product Specs TYPE: Pivotal PADDING: Fat WEIGHT: 317g / 11.2oz
Completely revied design. Crew Front hub laced to a Match V2 rim. Comes with 2 hubguards. ###section### Product Specs WHEEL SIZE: 20" HUB: Cult Crew AXLE: Female RIM: Cult Match V2 SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
Mid size...just the right amount of padding and made from durable materials, only available in pivotal ###section### Product Specs TYPE: Pivotal PADDING: Mid WEIGHT: TBC
The perfect combination of strength and style, top of the list for any new build! Fully CNC machined 6061 Alloy with attention to keeping the size down. 29mm rise. ###section### Product Specs TYPE: Top Load REACH: 49/52mm RISE: 29mm CLAMPING DIAMETER: 222mm WEIGHT: TBC
Butted 4130 bars from United with 100% post weld heat treating. ###section### Product Specs Rise: Multiple Options Width: 28.5" Up Sweep: 1° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
54% lighter, twice as robust in the needle puncture test and 50% smaller in pack size than conventional tubes - the Tubo BMX reduces the overall weight of your wheel by up to 78g per wheel! Made from latex thermoplastic rather than the traditional butyl, this tube is super strong, super light and super sustainable.
Dual Angular Contact,this describes the use of both angular contact bearings and angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. Here are a few key points of the AC-2 BMX Front Hub: The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell without any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in perfect alignment with each other! This ensures superior bearing performance and less chance of premature wear. Hub shell literally floats on the axle. The only force on the bearings is supplied by the wave spring (which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! ###section### Product Specs AXLE SIZE: Females Bolts SPOKE HOLES: 36h BEARINGS: Steel 20mm angular contact WEIGHT: 245g / 8.64oz
Designed for use with Profile Racing 3-Piece Race Chromoly Crankset and 19mm-48 spline axles. Chainring can be mounted on inner or outer face of spider for chainline adjustability.
The Itsy grip is a 175mm long flangeless grip with a simple and comfortable geometric design. Made with a soft kraton rubber compound and includes ultra durable Merritt Insert Bar Ends. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs DIAMETER: TBC LENGTH: 175mm PACK SIZE: 2 (Pair)
Simplicity, strength and functionality, that's the Merritt Inaugural Front Load Stem. This clean and simple front load style is built from CNC machined 6061-T6 aluminium for strength with its hollowed out center section saving weight without affecting strength at all. Solid chromoly bolts lock the stem and your bars securely in place. For the finishing touches Merritt went with a chamfered edge design and a cast, countersunk Merritt badge. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 6mm CLAMPING DIAMETER: Front Load WEIGHT: 315g (11.1oz)
The Slaughter Bars are designed and made to be extra strong without being overbuilt. The bends of the uprights and crossbar provide maximum welding surface area for ultimate strength. Further down the uprights ovalise and wrap around the stem clamp bar, again maximizing welding area and reducing flex associated with taller handlebars. Constructed of multi-butted 4130 chromoly and post-weld heat-treated. ###section### Product Specs Rise: Multiple Options Width: 29.25" Up Sweep: 2° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 4 Piece Weight: TBC ###section### ###shogun-image-section###
The Snake bars from Merritt are multi-butted heat-treated chromoly with dual radius bends and a 19mm crossbar. The bends provide maximum welding surface area for ultimate strength. ###section### Product Specs Rise: 9.5" Width: 29.25" Up Sweep: 1° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2 Piece Weight: TBC ###section### ###shogun-image-section###