Eclat have taken the tri-spoke Vent sprocket and beefed it up with a 7mm thick guard making it ideal for all who like a good crank arm slide or sprocket stall. Each of the spokes are internally machined to reduce weight without compromising strength. The Vent Guard Sprocket will fit the majority of cranks on the market and uses wider spacing meaning you can run it with wide and half link chains with no issues. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
super tough street sprocket, 6.35mm thick, includes spacers for 19mm and 22mm spindle, fits 24mm sprindle ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 70g
Felix Prangenburg's signature sprocket is now available with a bolt-on Alloy bash guard, with a strong sprocket bolt interface, including 4 hollow sprocket bolts for attachment. Felix went to WTP with a unique idea for a sprocket which was much thicker than anything else we had done before. we were instantly stoked on the idea and worked with him to make it a reality. The Pathfinder sprocket is 8mm thick and uses a unique 9 sided design that allowed us to integrate the sprocket mounting location into the spoke pattern, resulting in a super clean looking sprocket with plenty of strength and longevity even for the most savage rider out there ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy with Nylon Guard WEIGHT: 104g / 3.66oz
Replacement nylon guard for the AK guard sprocket. ###section### Product Specs TYPE: N/A MATERIAL: Nylon WEIGHT: TBC
The Vent is a simple and smooth looking sprocket, incorporating a unique three spoke design. Each of the spokes are internally machined to reduce weight without compromising strength. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
The Kink Imprint sprocket features a symmetric and balanced design, with a uniquely machined surface pattern. This four spoke design shaves off some weight with two sunken spokes and its four primary cutouts. Accurately shaped and lightly chamfered teeth create a smooth ride and chain seating. Fully CNC machined from 6.35mm thick 7075-T6 aluminum means this is a sprocket built to last. ###section### Product Specs TYPE: Bold On MATERIAL: 7075-T6 aluminum WEIGHT: 70g
Check out the 7075-T6 Aluminium Mankind Sunchaser Sprocket with a classic Bicycle Motocross 5 Star design. Includes 19mm & 22mm adaptors. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 80g
New for the Kyle Baldock range of signature Killabee parts is this sprocket which is machined from a solid piece of tough 7075 alloy and finished with the Killabee Logo print. Available in both White and Yellow print and 25t/ 28t gear sizes. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 63g / 2.22oz
Eric Lichtenberger's signature guard sprocket from Stranger ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 120g
Everyday is a great day on your bike, celebrate that with the Rant Have A Bike Day Sprocket. Strategically placed cutouts form the images of happiness, but still retain strength and function. Forged from 5mm thick 6061 alloy with a light CNC cleanup. Keep it chill with the H.A.B.D Sprocket. ###section### Product Specs TYPE: Bolt On MATERIAL: 6061-T6 Alloy WEIGHT: 2.4 oz for 25T
The Ackerman Sprocket is CNC’d from 6061 aluminium and is simple and strong. Available in 25T and 28T and includes adapters for 19mm and 22mm cranks. ###section### Product Specs TYPE: Bolt On MATERIAL: 6061 Aluminium WEIGHT: 240g
The Reel Guard sprocket from Cinema is made from a super thick 7075-T6 Aluminium and features machining that saves weight and offers plenty of clearance. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 130g
All new Drain Man sprocket from S&M, Made from CNC'd 6061 Aluminum in USA .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 79g / 2.8oz
CNC machined from 7075 Aluminum in the USA, Requires no sprocket bolt. Instead, it has a hardened CrMo steel insert in that matches up to the 48 splines on the crank axle for pure, direct power transfer. Available for 22mm splined axles only .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs TYPE: Spline Drive MATERIAL: Alloy WEIGHT: 78g/2.75oz
7075 Machined Aluminium sprocket from T1. The Logan Runs Sprocket is 6mm thick and comes with 2 adapters to fit 19mm or 22mm crank spindles ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 69g / 2.4oz
New guard BMX sprocket from BSD. The guard sprocket features 5 spoke design which allows you to rotate the sprocket for maximum wear on the guard.. Supplied with both 19mm and 22mm top hat washers ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
Description for Cult Panza Conviction Sprocket Black / 28T not available
Heavy duty high density nylon guard from Cult. Only works with the Conviction sprocket.
Fully CNC machined 7075 Alloy, 4mm Thick 4 Bolt design. CNC'd Stay Strong logo with a CNC'd bolt recess. BCD 104 ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 78g
Inspired by the classic Motomag wheel with a vintage look and modern S&M American quality. CNC machined 6061 T6 Aluminum, 3/32″ teeth, 15/16″ (24mm) center bore. 19 and 22mm steel hat washers included. Made in USA. ###section### Product Specs TYPE: Bolt On MATERIAL: Aluminum WEIGHT: TBC