Cotton pullover hoodie from Cult with screen print logo on chest.
The Box Two Hollow Center Clamp stem is cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218g/7.7oz. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, Box reduced the weight and E3size and eliminated a serious hazard to the rider’s knees. These stems come with either a 48mm or 53mm extension and have a 22.2mm clamping diameter. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. Not compatible with forks that have carbon fiber steerer tubes. ###section### Product Specs TYPE: Front Load REACH: 40mm/45mm/48mm/53mm RISE: 5mm CLAMPING DIAMETER: 22.2mm WEIGHT: 218g/7.7oz (53mm) E4
The Audio rear cassette is United's higher end Cassette hub,featuring a solid and instant engagement system, heat treated 4130 Cromo hollow axle, fast sealed bearings and two removeable nylon hub guards. This hub has you covered for every type of riding, all at a great price! ###section### Product Specs HUB TYPE:Cassette AXLE:4130 Cromo hollow male axle DRIVER:9T SPOKE HOLES:36h WEIGHT:TBC
Classic stem design with a 24mm rise and minimal cutouts for extra strength designed with Stephan August. Oversized bolts for increased clamping grip. ###section### Product Specs TYPE: Top Load REACH: 48mm RISE: 24mm CLAMPING DIAMETER: 22.2mm WEIGHT: TBC
The Skate Old Skool is an absolute classic style that's been completely redesigned for skateboarding. Sturdy suede and canvas make up the uppers with Duracap reinforcement rubber underlays in key areas adding unrivaled durability that can withstand daily skateboarding abuse. PopCush sockliners are low profile enough to keep your feet close to the board while still providing the highest level of impact cushioning. Vans proprietary SickSlick gum rubber compound creates an outsole that's got more grip and durability than any before. ###shogun-image-section###
The Slip-On BMX by Dan Lacey is fully equipped with DURACAP™ reinforcements, POPCUSH™ drop-in sockliners for maximum comfort, and full medial arch support, all built on our revolutionary WAFFLECUP™ BMX outsole to provide maximum pedalfeel and durability with timeless style. ###shogun-image-section###
The repositioned DURACAP™ reinforced underlays and fully redesigned uppers, combined with a two-part foxing tape that features a deeper knurl pattern on the toe, make the Skate Grosso Mid durable enough to withstand daily riding abuse. For more control, the molded heel counter and internal tongue straps lock in your feet. Even the gum rubber sole that made Vans famous has been elevated with the SICKSTICK™ rubber compound to deliver more grip. Plus, POPCUSH™ energy return sockliners provide superior cushioning and impact protection while helping to lessen leg fatigue for longer sessions. Internal heel stiffeners have also been added to provide more support and stability. ###shogun-image-section###
The iconic Vans-style upper with DURACAP™ reinforcement, on top of WAFFLECUP™ BMX construction, gives the BMX Sk8-Hi maximum pedalfeel and durability. . .with a timeless style. This high top BMX shoe also features sturdy suede and 10 oz canvas uppers, supportive padded collars, and Vans original waffle outsoles made of a rubber that offers grip and support. ###shogun-image-section###
These kits allow Profile Mini, Elite, High Flange, Totem, or Madera V2 hubs to be converted from 14mm axles to 3/8″(10mm) bolt on axles. Kit includes 2 socket head bolts(3/8-16 thd), 2 volcano cones for bolts, 2 steel 3/8″ washers, 2 cone spacers, 1 threaded center axle(Chromoly Steel or Aluminum)
Box One brake levers are the first ever to incorporate a clamp for ODI Lock-On grips. This ensures that your grips stay put while eliminating the need for an extra clamp. At roughly 50 grams, these cold forged and CNC-machined levers beat any other on the market. Genius levers have a built in return spring and are fully compatible with carbon handlebars. The Mid reach lever features a new design that puts it in the same reach position as the Long, but with a more BMX-specific blade for better one-finger leverage. Other features include adjustable reach, a titanium mounting bolt and stainless steel hardware. Genius levers are designed to work with linear-pull brakes and are excellent for BMX, mountain, city, urban and tandem flat-bar bicycles.
Top load stem from Relic. With a sligthly higher rise than the elect stem the eon stem features the same internal machining to keep the weight down and Relic Logo on the top plate. ###section### Product Specs TYPE: Top Load REACH: 53mm RISE: 29mm CLAMPING DIAMETER: 22.2mm WEIGHT: 312g
The Box One Levers are cold forged and CNC-machined from the highest-quality 6061-T6 aluminum, making them strong and stiff, yet super lightweight, at 55g/1.9oz. Unlike other lightweight levers, these levers have a built in return spring. Other features include adjustable reach, a titanium mounting bolt and stainless steel hardware. These levers are designed to work with linear-pull brakes.
Going back to the beginning of Demolition (2000) for this re-issue. Classic Lightning Logo CNC’d and now available as a 7075 aluminum guard sprocket. Two bolt drive holes for added life! ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 1lb
Box One brake levers are the first ever to incorporate a clamp for ODI Lock-On grips. This ensures that your grips stay put while eliminating the need for an extra clamp. At roughly 50 grams, these cold forged and CNC-machined levers beat any other on the market. Genius levers have a built in return spring and are fully compatible with carbon handlebars. The Mid reach lever features a new design that puts it in the same reach position as the Long, but with a more BMX-specific blade for better one-finger leverage. Other features include adjustable reach, a titanium mounting bolt and stainless steel hardware. Genius levers are designed to work with linear-pull brakes and are excellent for BMX, mountain, city, urban and tandem flat-bar bicycles.
Box's One Oversized Top Load Stem boasts a unique look compared to other stems thanks to their constant drive to improve. CNC machined from 6061-T6 aluminium alloy and Cold-forged for maximum strength. Their stems are oversized for a reason, they've focused specifically on the stem-to-bar interface improving and enlarging the surface area of the stem by moving material from low stress areas. Front-Load clamp design with 48, 53 and 60mm extensions available. Fits 1 1/8” steerer tubes and 31.8mm handlebars. ###section### Product Specs TYPE: Top Load REACH: 48-60mm RISE: 28mm CLAMPING DIAMETER: 31.8mm WEIGHT: 263g / 9.3oz - 280g / 9.9oz
The repositioned DURACAP™ reinforced underlays and fully redesigned uppers, combined with a two-part foxing tape that features a deeper knurl pattern on the toe, make the Skate Grosso Mid durable enough to withstand daily riding abuse. For more control, the molded heel counter and internal tongue straps lock in your feet. Even the gum rubber sole that made Vans famous has been elevated with the SICKSTICK™ rubber compound to deliver more grip. Plus, POPCUSH™ energy return sockliners provide superior cushioning and impact protection while helping to lessen leg fatigue for longer sessions. Internal heel stiffeners have also been added to provide more support and stability. ###shogun-image-section###
Introducing the Metra stem from Eclat. Using full CNC machining, Features include; STC (Shark tooth Clamping) for additional handlebar clamping strength, unique offset rear for improved clamping, CNC machining under the stem to reduce weight ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 30mm CLAMPING DIAMETER: 25.4mm WEIGHT: 367g
The S&M pullover hooded sweatshirt is made with soft mid weight fleece and generous fit for comfort. Features a jersey lined hood heavy gauge drawcord with metal eyelets and 1_1 ribbing at cuffs and waistband.
80% cotton 20% polyester hoodie from ES with Jersey lined hood, Split stitch double needle sewing on all seams and twill neck tape.
Pullover hoodie from Fast & Loose with kangaroo pouch and logo on chest and back.