Etnies created the Foreland for those adventures outside of skateboarding, BMX or mountain biking, take to the outdoors safe in the knowledge that your feet are gonna be comfy all day. The suede and synthetic upper has been treated with a water resistant finish, while the shoe is lined with a 3M Thinsulate lining to keep you warm, dry and comfortable. A thermal retention aluminium stroble board and Foam Lite 2 insole provide more essential warmth and cushioning. The outsole utilises 400 NBS rubber with a reverse lug tread that provides plenty of grip and traction. ###shogun-image-section###
Shaun Macintosh signature 10" bars from Fit. Gonna fire out some big moves? Better grab some big bars. Butted 4130 CrMo Tubing. Dual Radius Bends w/ large top bend to increase strength. American-Made. ###section### Product Specs Rise: 10" Width: 29" Up Sweep: 4 ° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 993g / 2.19lbs ###section### ###shogun-image-section###
Based on Primos popular VS rim the VSXL+ is its wider counter part. Made from 6061-T6 aluminum the VSXL+ rim features a cross lace design for added strength and stiffness. At 38mm wide the VSXL+ rim is over 12% wider than the VS helping it maintain the correct profile of modern tyre sizes. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 384mm HEIGHT: 20mm WIDTH: 38mm SPOKE HOLES: 36h WEIGHT: 560g / 55oz
Clean and simple looks with the male into female axle system. 36H low flange 6061 AL hub shell with a 4140, 14mm heat-treated CRMO center axle, 3/8” bolts that are longer than previous or traditional for added strength when running pegs and 2 large sealed bearings that are pressed further into the shell to prevent bearing blowouts and movement. This hub also includes both press on plastic hub guards to keep those spokes safe. ###section### Product Specs AXLE SIZE: 3/8 Bolt On Female SPOKE HOLES: 36 BEARINGS: Sealed WEIGHT: 9.6 oz.
6061 CNC topload stem that features CNC cuts to reduce weight, a wider 48 mm clamping area, beveled sides, and extensive cutouts inside and out to reduce weight. ###section### Product Specs TYPE: Top Load REACH: 50mm RISE: 34mm CLAMPING DIAMETER: 48mm WEIGHT: 1lb
The Etnies Camber Crank features a low-cut silhouette, Michelin rubber outsole with a connected Foam Lite 1 footbed, Die-Cut EVA midsole, fat padded gusseted tongue and collar and water resistant repel technology. ###shogun-image-section###
Description for Vans Daleside Jacket - Moroccan Blue Medium not available
The Mission Battalion V2 Forks were absolutely built to last, upgrading their classic Battalion style for improved strength and performance. They feature a 100% 4130 chromoly construction for maximum durability, an integrated bearing race, 2-piece CNC steerer tube and an aluminium fork compression bolt. 5mm thick dropouts look slick and add extra strength to the forks, lastly the 26mm axel offset makes the forks more responsive while still providing plenty of clearance for pegs. ###section### Product Specs Steerer Length: 165mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 3/8" Offset: 26mm Weight: 1190g / 2.62lbs
Signature Van Homan handlebars from Fit. These handlebars are hand made to Van's specification in California from heat treated 4130 Crmo. The Vandlebars have a tall 9"" Rise with classic Handlebar geometry so are super comfortable. Straight gauge tubing and a larger radius bends make these bars stronger than most. ###section### Product Specs Rise: 9" Width: 29" Up Sweep: 2 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1179g / 2.6lbs ###section### ###shogun-image-section###
The Colin Varanyak signature bar. With a 9.5" Rise, Multi Butted Chromoly. Post weld heat treatment. ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
Team tested Rim from Animal bikes, 40mm wide profile and made from 6061 Aluminum with a welded seam this rim is solid ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 389mm HEIGHT: 20mm WIDTH: 40mm SPOKE HOLES: 36h WEIGHT: 510g / 18oz
The Polar Fleece Anorak is a 100% polyester polar fleece pullover anorak sweatshirt with a half zip at the neck, a colourblocked construction, and a woven patch at the left chest.
The Half Cab 30th Pullover Hoodie features an old school Half Cab woven label at the front pocket, and large Half Cab graphics at the back. This hooded sweatshirt is made with 100% cotton.
Top Load BMX stem from Animal. The Inverse stem is CNC'd from 6061 aluminium with a brushed anodised finish and griffin head logo on the sides and animal logo on the top and bottom ###section### Product Specs TYPE: Top Load REACH: 48mm RISE: 22mm CLAMPING DIAMETER: 22.2mm WEIGHT: 328g
Matt Nordstrom signature bars from Fit. Made from 4Q Baked 4130 CrMo tubing with dual radius bends with a large top bend to increase strength. American Made ###section### Product Specs Rise: 9" Width: 29" Up Sweep: 2° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 2.15 lb / .975 kg ###section### ###shogun-image-section###
Replacement 184mm axles exclusively for Profile Z Coaster® hubs. Hardware shown on axles (jam nuts & cone spacer) included.
The 7KA rim is made from 7005 series aluminum, the hardest, strongest aluminum currently available. Lightweight, double wall design with wide cross sections and welded "seamless" construction ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 390mm HEIGHT: 17mm WIDTH: 34mm SPOKE HOLES: 36h WEIGHT: 482g / 17oz
Description for Vans Original Co Anorak - Black/Desert Taupe Medium not available
Larger version of the Void bars from Relic! The DIY bars are made from straight gauge 4130 cromo tubing with dual radius bends with a large top bend for strength. ###section### Product Specs Rise: 9.35" Width: 30" Up Sweep: 3° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
Tom Dugan's signature top load stem. The DGN stem is CNC'd machined from 6061-T6 aluminum and has a top cap recess so the top cap sits flush with stem when mounted. ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 28mm CLAMPING DIAMETER: 22.2mm WEIGHT: 312g