The Troy Lee Designs 5955 Chest Protector is specifically developed to integrate with industry leading neck braces without compromising fit, protection or rider safety. Exclusively designed to allow neck braces to nest properly against a rider's chest and back. Tested by top pros and elite amateurs, our innovative patent-pending design gives riders the power to choose from multiple configurations for customized comfort and fit, unobstructed motion, and unprecedented protection.
The ultimate chest protector specifically developed to integrate with industry leading neck braces without compromising fit, protection or rider safety. Exclusively designed to allow neck braces to nest properly against a rider's chest and back. Tested by top pros and elite amateurs, the innovative patent pending design gives riders the power to choose from multiple configurations for customised comfort and fit, unobstructed motion, and unprecedented protection.
Complete rear wheel from Eclat. Assembled using the Pulse Cassette Hub and the straight-walled Trippin rim for a better braking surface on the rear. 9t SDS driver for LHD or RHD. ###section### Product Specs WHEEL SIZE:20" HUB:Eclat Pulse Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Left & Right Switchable RIM:Eclat Trippin SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1188g / 49.91oz
Sunday's clutch-based coaster hub with a new, strong axle, bearing configuration, and drag mechanism design reduces the need for constant repairs. This hub features a simplified internal slack adjustment. Using only a 2.5mm hex key, simply loosen or tighten the grub screw to your desired slack, then put the hub back together. It includes a female axle with a 14mm non-drive side axle bolt and 10mm drive side bolt with built-in 14mm adapter. This configuration is lighter than a 14mm male axle. The 3/8” drive side bolt provides room for a long-lasting bearing system in the driver – one of the weakest points on traditional hubs. The 14mm non-drive side bolt allows for a larger bore in the axle. ###section### Product Specs HUB TYPE:Freecoaster AXLE:Female Bolts DRIVER:9t SPOKE HOLES:36h WEIGHT:640g / 22.5oz
Volume double walled rim laced up with our all new Foundation Freecoaster hub. Laced with stainless steel black spokes and brass nipples. ###section### Product Specs WHEEL SIZE:20" HUB:Volume Sealed 9t Cassette+AI786 AXLE:14mm Male Axle DRIVE SIDE:Right Side Drive RIM:Volume Double Walled Rim SPOKES:36 NIPPLES:Brass WEIGHT:TBC
The Balance freecoaster hub features dual Nylon guards and offset flanges for a minimal aesthetic and is laced to the VS rim. Made from 7005 aluminium and featuring a V shaped I beam construction for added strength and holes drilled in the inner wall to save weight. The rim is welded at the seam and is available in 36 hole only. ###section### Product Specs WHEEL SIZE:20" HUB:Primo Balance Freecoaster AXLE:14mm Female DRIVE SIDE:Right Side Drive RIM:Primo VS SPOKES:Primo Forged Spokes NIPPLES:Brass WEIGHT:TBC
The Grime frame from BSD, built for the young shredder from Huntington Beach, Denim Cox. Whether he's riding motocross, Barbie bikes or BMX, you know Denim tears it up on all terrain. Designed to Denim’s specification, with a steep 75.5° headtube angle, a 12.8 - 13.2” rear end length with an invest cast chainstay yoke for extra tyre clearance and a 9” standover. The Grime frame has an invest cast chainstay yoke which creates more clearance for the tyre for when your wheel is slammed. Also because this part is cast and heat treated it strengthens the rear end of the frame by stiffening it up. The invest cast seatclamp is brazed onto the frame so there's no need for a separate clamp. Also the slot cut beneath the seatclamp gives more clamping power less torque on the bolt. The dropout is cast as one piece, much stronger than a plate welded to a tube. 7mm thick to provide good support for your axle, and the small shape has been designed for grinding meaning there's no overhang to catch on ledges or rails, also the dropout is heat treated before welding making it extra tough. ###section### Product Specs MATERIAL: Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 12.8 - 13.2” BB HEIGHT: 11.7" WHEEL SIZE: 20" STANDOVER HEIGHT: 9" DROPOUT SIZE: 14mm HEADSET TYPE: Intergrated BB TYPE: Mid BRAKE MOUNTS: Brakeless GYRO TABS: None WEIGHT: TBC ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Best suited to Street and Park riding High-quality Chromoly construction Brakeless Frame Integrated seat post clamp ###shogun-image-section###
The Cult Crew cassette wheel features the Cult Crew SDS cassette hub built onto a Cult Match rim using forged spokes... Comes with non drive side hub guard and Cult carabiner spoke wrench… Flip Flop design... Hub can be converted from RHD to LHD. ###section### Product Specs WHEEL SIZE: 20" HUB: Cult Crew SDS Cassette AXLE: 10mm DRIVE SIDE: Left & Right Switchable RIM: Cult Match SPOKES: 36 NIPPLES: Alloy WEIGHT: TBC
Pre-Built Cassette BMX wheel from Shadow. The Shadow Symbol Cassette wheel pairs the value and reliability of the Shadow Symbol cassette with the rigidity and strength of the Shadow Truss rim to create an unbeatable combination. Including a replaceable plastic non drive side hub guard and laced 3 cross to the wider, 38mm Truss rim, this wheel is ready for action without any extra consideration. ###section### Product Specs WHEEL SIZE:20" HUB:Shadow Symbol Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Shadow Truss SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1256g / 44.32oz
These lightweight, strong BMX forks have a built in bearing race and a threadless 1-1/8" steertube, tapered at the headtube, with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: Tapered 1 1/8" - 1 1/2" Wheel Size: 20" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 800g (top cap included)
The Thunderbolt + is the descendent of the Twombolt. It is still one of the most technically advanced crank designs on the market. Due to continued advancements in the legendary 41-Thermal processing and heat-treatment system, fatigue life has been increased by a massive margin. ###section### Product Specs Type: 2pc Spindle Diameter: 22mm Drive Side: Left Side Drive Includes BB Bearings: Yes Weight: 799g / 28.16oz ###shogun-image-section###
Cassette hub from Tall Order. The Drone cassette hub features 3 individually sping and pawls with 150 points of contact which creates an almost instant engagement when you start to pedal as well as being one of the most unique sounding cassettes on the market.The Hub also has a chrome driver and laser etched logo to complete the look. ###section### Product Specs HUB TYPE:Cassette AXLE:Female Bolts DRIVER:9t SPOKE HOLES:36h WEIGHT:TBC
The Thunderbolt + is the descendent of the Twombolt. It is still one of the most technically advanced crank designs on the market. Due to continued advancements in the legendary 41-Thermal processing and heat-treatment system, fatigue life has been increased by a massive margin. ###section### Product Specs Type: 2pc Spindle Diameter: 22mm Drive Side: Right Side Drive Includes BB Bearings: Yes Weight: 799g / 28.16oz ###shogun-image-section###
Primo freemix V2 wheel with hub guards. The Primo Freemix wheel features the Primo freemix hub built onto the new V2 Primo Balance rim using Primo forged spokes. Only available in 9t version ###section### Product Specs WHEEL SIZE:20" HUB:Primo Freemix Hub AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Primo Balance SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1394g / 49.2oz
The Back Street Pro is BSD's street ready hub. BSD have designed the Back Street Pro around their own custom driver with skip free mechanism while still maintaining a compact sized shell. With features such as bombproof 14mm male axle, chromo cones and a hefty 6903 bearings, you know this hub is built street tough. The Back Steet Pro is laced to BSD's XLT rim. The XLT is BSD's lightweight rim, designed around an X-section for increased stiffness, the rim has an aero style shape which further triangulates the design. With other proven features such as tapered sidewalls and patented cross over lacing this rim is light while remaining strong. ###section### Product Specs WHEEL SIZE:20' HUB:BSD Bck Street Pro AXLE:14mm DRIVE SIDE:Left Side Drive RIM:BSD XLT SPOKES:TBC NIPPLES:TBC WEIGHT:TBC
24" version of the Hazard Lite cassette wheel. The C5 is a strong, drive switchable, affordably priced cassette hub with a 14mm chromoly male axle. The LHD/RHD compatible 9T driver rolls on three precision, sealed cartridge bearings. The C5 is laced to Odyssey's Hazard Lite rim. A true bmx classic, the Hazard Lite is respected because of its strength, reliability and light weight. Often imitated but never matched in quality or durability. The Hazard Lite is the rim of choice for some of the world’s best riders. ###section### Product Specs WHEEL SIZE:24" HUB:Odyssey C5 AXLE:14mm DRIVE SIDE:RHD/LHD switchable RIM:Odyssey Hazard Lite SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:TBC
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Left Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
The Cambian Grind Box is made from high quality exterior birch plywood which is sourced from a sustainably FSC or PEFC certified supply chain. Supplied flat packed. Medium Grind Box measures 1800x355x255mm .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }
The long awaited and highly anticipated Seismic hub from Eclat is now available! Eclat have designed a brand new cassette TCS (Toothed Coupling System) mechanism which features 2 couple d toothed ratchet rings which are inside the hub and the driver. The two rings are pushed together with a very special design of spring, which allows the hub to transfer power in one direction, and “freewheel” in the other. Basically a much stronger internal mechanism, which can’t fail even after years of heavy use. No more skipping, slipping or popping, you can really crank this thing as hard you want and it’s not going to fail. Even after years of heavy use, this hub was designed to keep going on and on. 2 x Nylon Eclat Hub guards included. ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:467g / 16.45oz
All new revamped hub shell and updated internals for Ryan “Biz” Jordan’s signature V3 RotatoR freecoaster hub. 6061-T6 aluminum hub shell. 14 mm heat-treated CRMO axle w/ allen insert for easy removal. Thrust needle bearing that reduces drag while back pedaling. Includes 3 slack washers for adjustments. ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:632g / 22.3oz