Box Three Hollow Forged Cranks are constructed from 6061 T-6 aluminium and have a super stiff 24mm Chromoly spindle. The cranks feature dual pinch bolts, laser etched graphics and include a bottom bracket. ###section### Product Specs Type:2pc Spindle Diameter:24mm Includes BB Bearings:No Weight:904 grams ###shogun-image-section###
The Project 23 Carbon Full Face Helmet features a whole host of materials and technologies to ensure your head gets the finest protection possible while offering an incredibly low weight for a hard-shell lid. Seven iDP chose a Carbon Fibre hardshell construction over the EPS foam core rather than in-moulding a light outer to a foam core, as can be found on most trail helmets. This makes it superb at absorbing impacts, prevents penetration from ground objects and, thanks to the carbon outer, weight is kept low without compromising safety. The CRV (Crash Release Visor) is also designed to snap away in the event of a crash, reducing forces on the neck and head. It simply snaps back into place too, rather than using bolts. The Project 23 Carbon also features the S.E.R.T. system, this acts as a slip-plane system to manage the rotational forces on your head and brain. By minimising and managing the transmission of impact forces to your brain, some 20% greater absorption than standard systems, you're less likely to suffer chronic brain injuries. The 23 vents make this the most ventilated hard-shell full-face helmet currently available. The TF (Through Flow) Goggle ventilation ensures you always have a clear view too, keeping fogging at bay. Size guide: X-Small: 20.75" - 21.25" (53 - 54cm) Small: 21.5" - 22" (55 - 56cm) Medium: 22.5" - 22.75" (57 - 58cm) Large: 23.5" - 23.75" (59 - 60cm) X-Large: 24" - 24.25" (61 - 62cm) XX-Large: 24.8" - 25.1" (63 - 64cm)
The Project 23 Carbon Full Face Helmet features a whole host of materials and technologies to ensure your head gets the finest protection possible while offering an incredibly low weight for a hard-shell lid. Seven iDP chose a Carbon Fibre hardshell construction over the EPS foam core rather than in-moulding a light outer to a foam core, as can be found on most trail helmets. This makes it superb at absorbing impacts, prevents penetration from ground objects and, thanks to the carbon outer, weight is kept low without compromising safety. The CRV (Crash Release Visor) is also designed to snap away in the event of a crash, reducing forces on the neck and head. It simply snaps back into place too, rather than using bolts. The Project 23 Carbon also features the S.E.R.T. system, this acts as a slip-plane system to manage the rotational forces on your head and brain. By minimising and managing the transmission of impact forces to your brain, some 20% greater absorption than standard systems, you're less likely to suffer chronic brain injuries. The 23 vents make this the most ventilated hard-shell full-face helmet currently available. The TF (Through Flow) Goggle ventilation ensures you always have a clear view too, keeping fogging at bay. Size guide: X-Small: 20.75" - 21.25" (53 - 54cm) Small: 21.5" - 22" (55 - 56cm) Medium: 22.5" - 22.75" (57 - 58cm) Large: 23.5" - 23.75" (59 - 60cm) X-Large: 24" - 24.25" (61 - 62cm) XX-Large: 24.8" - 25.1" (63 - 64cm)
Available from under 1500g for a pair, the Sub-4 wheels accelerate like nothing else, yet can still take impacts when trying out new lines. The front wheel is fully anodised while the rear has a CNC sidewall for consistent braking performance. Sub-4 Race wheels are built around our hugely successful MX Series hubs. MX Series hubs all feature huge flange spacing for lateral stiffness and sealed bearings for longevity all conditions. There are two drive options for the Sub-4 Rear wheel. Our MXR Supadrive hub with its instantaneous 120 point pickup Supadrive system, or MXR FW freewheel threaded hub as the simplified option which is well paired to the Halo Clickster 72 click freewheel. ###section### Product Specs WHEEL SIZE:20" HUB:Halo MXRC 36H cassette AXLE:Female Bolts DRIVE SIDE:Right Hand Side RIM:Halo Sub4 Rim SPOKES:Butted NIPPLES:Alloy WEIGHT:TBC
Sold individually for riders wishing to run a disc setup on their bikes, no breaking surface needed on the rear so two front rims for a cleaner look. ###section### Product Specs WHEEL SIZE: 20" SEAM: Carbon ERD: 469mm HEIGHT: 30mm WIDTH: 30mm SPOKE HOLES: 36 WEIGHT: 418g
Sold individually for riders wishing to run a disc setup on their bikes, no breaking surface needed on the rear so two front rims for a cleaner look. ###section### Product Specs WHEEL SIZE: 20" SEAM: Carbon ERD: 469mm HEIGHT: 30mm WIDTH: 30mm SPOKE HOLES: 36 WEIGHT: 418g
Sold individually for riders wishing to run a disc setup on their bikes, no breaking surface needed on the rear so two front rims for a cleaner look. ###section### Product Specs WHEEL SIZE: 20" SEAM: Carbon ERD: TBC HEIGHT: 30mm WIDTH: 24mm SPOKE HOLES: 28 WEIGHT: 315g
Sold individually for riders wishing to run a disc setup on their bikes, no breaking surface needed on the rear so two front rims for a cleaner look. ###section### Product Specs WHEEL SIZE: 20" SEAM: Carbon ERD: TBC HEIGHT: 30mm WIDTH: 24mm SPOKE HOLES: 28 WEIGHT: 315g
The idea behind the Rose frame was to create a frame that helps bridge the gap between an 18” bike and a full size 20”. By offering shorter top tube lengths, starting at 20″. This allows riders of all ages to customise their bike for just what they need for their size Super short 12.9” rear end length with ovalised chainstays help to reduce flex and to fit wide tyres while the rear wheel is slammed. The Rose Frame also has a lower standover height to accommodate riders on the rise in both skills and size. Top and Down tube gussets are standard on Subrosa frames, and a built in seat post clamp tops it off nicely. ###section### Product Specs MATERIAL: 4130 chromoly HEAD TUBE ANGLE: 75º SEAT TUBE ANGLE: 71º CHAIN STAY LENGTH: 12.8” – 13.35” BB HEIGHT: 11.5" WHEEL SIZE: 20" STANDOVER HEIGHT: TBC DROPOUT SIZE: 14mm HEADSET TYPE: Intergrated BB TYPE: Mid BRAKE MOUNTS: Removable (Sold separately) GYRO TABS: Removable (Sold separately) WEIGHT: 4.9 lbs (20.9”) ###section### Product Highlights Neutral Geometry for responsiveness and stability Great all round frame for all types of riding Gusseted tubing for added strength Ovalised chain stay for dent resistance and stability Removable brake hardware (Brake hardware not included) ###shogun-image-section###
Stay Strong V3 Carbon Cruiser Rear Race Rim. Sold individually for riders wishing to run a disc setup on their bikes, no breaking surface needed on the rear so two front rims for a cleaner look. ###section### Product Specs WHEEL SIZE: 24" SEAM: Carbon ERD: TBC HEIGHT: 30mm WIDTH: 30mm SPOKE HOLES: 36 WEIGHT: TBC
Stay Strong V3 Carbon Expert Race Rim. Sold individually for riders wishing to run a disc setup on their bikes, no breaking surface needed on the rear so two front rims for a cleaner look. ###section### Product Specs WHEEL SIZE: 20" SEAM: Carbon ERD: TBC HEIGHT: 30mm WIDTH: 24mm SPOKE HOLES: 28 WEIGHT: TBC
Stay Strong V3 Carbon Pro Race Rim. Sold individually for riders wishing to run a disc setup on their bikes, no breaking surface needed on the rear so two front rims for a cleaner look. ###section### Product Specs WHEEL SIZE: 20" SEAM: Carbon ERD: 336mm HEIGHT: 30mm WIDTH: 30mm SPOKE HOLES: 36 WEIGHT: TBC
The Motocross pays homage to Bicycle Union, featuring inspiration and input from shared team riders. With a trails style geometry, sealed bearings throughout and a ton of aftermarket parts, the Motocross is ready to hit the trails or park straight out of the box. ###section### Product Specs FRAME MATERIAL: Cromo top tube, Hi-ten steel WHEEL SIZE: 20" TOP TUBE LENGTH: 21" CHAIN STAY LENGTH: 13.25" HEADTUBE ANGLE: 74.5° SEAT TUBE ANGLE: 71° FORKS: Cromo steerer tube, 1020 Hi-Ten legs, integrated bearing race BARS: 9" X 29" 1020 Hi-Ten 1° up 12° back STEM: United 50mm reach top load HEADSET: United Sealed Integrated BRAKE MOUNTS: Welded BRAKES: TBC FRONT HUB: 36H sealed female 10mm axle FRONT RIM: Alloy 36H single wall REAR HUB: 36H sealed alloy cassette with 14mm cromo axle and 9T 4 pawl driver REAR RIM: Alloy 36H single wall TYRES: United Direct 20" X 2.35"(front) & 2.1" (rear) - 65PSI SPROCKET: 28T Steel CRANKS: 170mm tubular, 8 spline with printed United logo BB: Seaed Mid PEDALS: United Supreme plastic SEAT: United padded seat/post combo with United sewn on patch GEARING: 28/9 WEIGHT: TBC ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) Designed with more stable feeling geometry to suit trails and park riding Sealed bearings throughout Strong and durable crankset High-quality aftermarket tires ###shogun-image-section###
Primo Remix wheel with hub guards. The Primo Remix cassette wheel features the Primo Remix hub built onto a Primo Balance rim using Primo forged spokes. Only available in 9t version. ###section### Product Specs WHEEL SIZE:20" HUB:Primo Remix Cassette AXLE:14mm Chromoly Female DRIVE SIDE:Right Side Drive RIM:Primo Balance SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1394g / 49.2oz
A complete skatepark and street ready rear cassette wheel built using the new Swerve cassette hub and BSD Aero Pro rim, this is the same rear wheel that BSD Pro team rider Kriss Kyle uses. ###section### Product Specs WHEEL SIZE:20" HUB:BSD Swerve AXLE:Female DRIVE SIDE:Left Side Drive RIM:BSD Aero SPOKES:BSD 194mm NIPPLES:Brass WEIGHT:984g
Primo Remix wheel with hub guards. The Primo Remix cassette wheel features the Primo Remix hub built onto a Primo Balance rim using Primo forged spokes. Only available in 9t version. ###section### Product Specs WHEEL SIZE:20" HUB:Primo Remix Cassette AXLE:14mm Chromoly Female DRIVE SIDE:Left Side Drive RIM:Primo Balance SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1394g / 49.2oz
Premium quality 24" Cruiser size carbon race rim from Stay Strong in a matte black finish with braking surface and water decals for a nice clean look. Rim will take a 1.5" tyre. Can also be used on rear if running disc brakes. ###section### Product Specs WHEEL SIZE: 24"X1.75" SEAM: Welded ERD: 469mm HEIGHT: 30mm WIDTH: 30mm SPOKE HOLES: 36 WEIGHT: 418g
Premium quality Expert size carbon race rim from Stay Strong in a matte black finish with water decals for a nice clean look. ###section### Product Specs WHEEL SIZE: 20"X1-3/8" SEAM: Welded ERD: 397mm HEIGHT: 38mm WIDTH: 23mm SPOKE HOLES: 28 WEIGHT: 316g
Premium quality Pro size carbon race rim from Stay Strong in a matte black finish with braking surface and water decals for a nice clean look. Rim will take a 1.5" tyre. Can also be used on rear if running disc brakes. ###section### Product Specs WHEEL SIZE: 20"X1.75" SEAM: Welded ERD: 369mm HEIGHT: 30mm WIDTH: 30mm SPOKE HOLES: 36 WEIGHT: 318g
Premium quality Expert size carbon race rim from Stay Strong in a matte black finish with braking surface and water decals for a nice clean look. Can also be used on rear if running disc brakes. ###section### Product Specs WHEEL SIZE: 20"X1-3/8" SEAM: Welded ERD: 397mm HEIGHT: 38mm WIDTH: 23mm SPOKE HOLES: 28 WEIGHT: 316g