Sam Jones' signature BSD Jonesin' Forks give him that little extra edge up front to keep him balanced. The steerer tube is made from 1-piece of fully CNC machined, heat treated chromoly, the legs are tapered, triple butted heat treated chromoly with a full post weld heat treatment to ensure these forks are at maximum strength. The Jonesin' Fork features 22mm offset invest cast dropouts, integrated headset race and clearance for 2.4" tyres. ###section### Product Specs Steerer Length: 157mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 22mm Weight: 997g / 2.2lbs
The Mission Deploy hub gives you a chance to upgrade to a freecoaster without breaking the bank. With sealed bearings throughout, adjustable slack, heat-treated chromoly axle, and left and ride hand drive options, the Deploy hub has you covered. ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm DRIVER:9T SPOKE HOLES:36h WEIGHT:22.0oz
The Mission Deploy hub gives you a chance to upgrade to a freecoaster without breaking the bank. With sealed bearings throughout, adjustable slack, heat-treated chromoly axle, and left and ride hand drive options, the Deploy hub has you covered. ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm DRIVER:9t SPOKE HOLES:36h WEIGHT:22.0oz
Monogram Bike flight bag from Odyssey. Odyssey worked on this bag for over a year to make sure this travel bag is just right. Not skimpy, but also not overbuilt to keep the weight down. The Monogram will make traveling with a bike a whole lot easier. Features Easy load opening Interior tool pouch Bike specific handle locations Re-inforced and riveted handles Heavy duty and grippy wheels Multiple tie downs and straps Minimal details for lightweight and stealth looks Interior divider for clean / dirty sections as well as for hiding the bike
Offering protection from the elements with classic Vans styling, the Street Outdoor MTE-1 Jacket features durable water repellent coating, a secure zip front closure, a hood, and lightweight fill for added warmth. The colourblocked design adds a unique aesthetic, and the woven logo label brings a workwear vibe. Made with a mix of polyester and nylon, this durable ripstop parka delivers on a promise of an all-weather enabling product.
The Shiv Fork is in its third revision, for the V3 Fit set out to create and produce a fork with plenty of tyre clearance. Offering a quick 25mm offset, seamless swaged legs that provide more strength than welded or fused caps - especially if pegs are installed. Because the end of the fork legs are formed, not capped and welded there is nothing to fracture. A longer 166mm CNC machined steerer tube features increased wall thickness wherever possible and a 24mm x 1.5 compression cap with integrated race. ###section### Product Specs Steerer Length: 166mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 25mm Weight: 1020g / 2.25lbs
The Vans Wells MTE Jacket is a water-resistant varsity jacket with a snapfront closure and hidden zipper placket for extra warmth and protection. It has a 5K durable water repellent (DWR) coating, adjustable bungee cords at the hood, and the Vans logo at the lower body. It has a contrasting sleeves and side pockets.
The Demolition Bulimia V2 front wheel features a Demolition Bulimia V2 front hub with low profile alloy hub shell, 3/8" chromoly axle and sealed cartridge bearings laced 3X to a 36H Demolition Zero double-wall rim with black 14G spokes and brass nipples ###section### Product Specs WHEEL SIZE: 20" HUB: Demolition Bulimia V2 AXLE: Chromoly Male 10mm RIM: Demolition Zero SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: TBC
New upgraded version of united Supreme Rear wheel for 2013. This wheel now features Uniteds Fulled sealed 9t cassette hub with a loud and smooth 4-pawl engagement system and 14mm male axle. The hub is also switchable from RHD to LHD by reversing the ratchet and pawls inside the hub. The Hub is laced into a sturdy, wide profile alloy double wall rim with black stainless spokes ###section### Product Specs WHEEL SIZE:20" HUB:United Supreme Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Left & Right Switchable RIM:Supreme Rim SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1270g / 44.8oz
Stay Strong’s V2 Golf Pro Series travel bag is designed to carry your bike, clothing, helmet, tools and accessories whilst passing as a golf bag which will possibly save you baggage charges depending on the airline. The tapered design with a wider area for the back wheel means it will comfortably take a cruiser sized wheel, whilst the top opening zip helps prevent the zip bulging when packing the bag to maximum capacity. Features include an internal zipped tool bag sewn into the base of the bag with removable inner bag. Internal straps to secure your bike and wheels, with dividing flap for separation and added protection. Padded side pocked with printed logos. Smaller additional zip pocket on lower section with 2 additional external straps and clips, a stiff plastic base for extra support, smooth rolling wheels and padded pull handle. Lightweight when empty and made from durable fabric, we believe this bag ticks all the boxes for your bike travel needs. Length : 129cm Width Rear: 52cm Width Top: 38cm (Tapered Design) Height : 30 cm .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }
Monogram Bike flight bag from Odyssey. Odyssey worked on this bag for over a year to make sure this travel bag is just right. Not skimpy, but also not overbuilt to keep the weight down. The Monogram will make traveling with a bike a whole lot easier. Features: Easy load opening Interior tool pouch Bike specific handle locations Re-inforced and riveted handles Heavy duty and grippy wheels Multiple tie downs and straps Minimal details for lightweight and stealth looks Interior divider for clean / dirty sections as well as for hiding the bike
Vans have improved the classic chore coat and made it tough enough for all-weather skateboarders. Taken from the workshops of hard labour and tweaked to be more durable, enhanced to repel water, and toughened up for the everyday grind, the Drill Chore Coat MTE features a 100% nylon 2L oxford shell with sustainable DuPont® Sorona® fill to keep you warm in cold weather yet cool and dry when you are active, 1K Durable Water Repellent coating for added protection, a removable hood, and moisture-wicking lining. It also includes a corduroy collar, a fully functional zip-off hood, a low-profile snap-front placket with a hidden zipper closure, dual entry pockets, and a reflective woven label at the chest pocket
36 hole complete rear wheel with a 36mm wide double wall rim laced to a 9t cassette hub with a 14mm axle and 5 sealed bearings. The driver has 3 sets of pawls for solid engagement. ###section### Product Specs WHEEL SIZE:20" HUB:9t cassette hub AXLE:14mm DRIVE SIDE:Right Side Drive RIM:36mm wide double wall SPOKES:TBC NIPPLES:TBC WEIGHT:TBC
Features DWR Polyester/Spandex 4-way stretch woven fabric for increased comfort. BOA System dial and lace technology for a lightweight, incrementally adjustable waist closure for the ideal fit. Silicone print on inner waistband to minimize slippage. Inseam laser holes and perforated back leg panels fr increased airflow. Zipper pockets for security of essentials. Stabilisation pocket to store device or tool. Tapered leg reduces drag and articulated knee improves mobility.
The crank of choice for Devon Smillie, the Onyx cranks from Eclat are the finest and the most inventive 3pc Chromoly cranks to date. They feature an oversize 24mm spindle, and a dependable 3pc design, allowing them to fit bolt bolt-drive and spline-drive sprockets. The arms, still use a super strong invest cast boss design at the spindle and pedal ends. The Onyx now feature updated the welding for improved strength. These cranks are designed to take the strain, stress and power of todays most fierce riders. ###section### Product Specs Crank Type:3pc Spindle Diameter:24mm Includes BB:No Weight:840g / 29.65oz ###shogun-image-section###
Cult's Sect IC V3 Fork improves on their ever popular IC Fork design. The V3 is made from revised Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1-piece drop outs provide maximum strength and a super sleek finish. 1-piece machined steerer tube with an integrated bearing race, tapered legs, a 28mm offset and tyre clearance for 2.4" tyres. ###section### Product Specs Steerer Length: 162mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 18 & 28mm Weight: 1002g / 2.21lbs
The R-Core X race pants are made from DWR polyester/spandex 4-way stretch woven fabric for increased comfort and a BOA Fit System dial and lace technology for a lightweight, incrementally adjustable waist closure for the ideal fit. The silicone print on inner waistband minimises slippage and laser perforations in inseam and behind the knees for increased airflow. They also feature zipper pockets for security of essentials.
Salt Ex sealed cassette hub laced to the Salt Valon reinforced single wall alloy rim. 36mm wide for 2.3"+ tyres. Includes rim tape and a Saltplus nylon hubguard. ###section### Product Specs WHEEL SIZE:20" HUB:Salt Ex sealed cassette AXLE:14mm DRIVE SIDE:Right Side Drive RIM:Salt Valon SPOKES:TBC NIPPLES:Aluminum WEIGHT:TBC
Slim and lightwight expert size fork made from fully heat treated 4130 chromoly with a 1 1/8″ steerer tube. ###section### Product Specs Steerer Length: TBC Steerer Diameter: 1 1/8" Wheel Size: 20" Material: 4130 CrMo Dropout Size: 10mm Offset: 30mm Weight: 848g / 1.86lbs
Slim and lightwight Junior size fork made from fully heat treated 4130 chromoly with a 1″ steerer tube. ###section### Product Specs Steerer Length: TBC Steerer Diameter: 1" Wheel Size: 20" Material: 4130 CrMo Dropout Size: 10mm Offset: 25mm Weight: 692g / 1.52lbs