Designed by pro riders, mechanics and scientists, Peaty's Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like proverbial to a blanket, yet leaves a minimal mess when removed. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit. Do you struggle to find the hole No problem! Just hold your rim up to the light and the tape's semi-transparent finish will illuminate the way. One 9 meter roll will cover approximately: 5 x 26" Rims, 4 x 27.5" Rims, 4 x 29" Rims or 4 x 700c Rims.
Designed by pro riders, mechanics and scientists, Peaty's Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like proverbial to a blanket, yet leaves a minimal mess when removed. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit. Do you struggle to find the hole No problem! Just hold your rim up to the light and the tape's semi-transparent finish will illuminate the way. One 9 meter roll will cover approximately: 5 x 26" Rims, 4 x 27.5" Rims, 4 x 29" Rims or 4 x 700c Rims.
The Shimano BB-UN300 Square Tapered is a good quality bottom bracket for traditional chain sets with super-accurate bearings for smooth operation and improved durability. It uses a maintenance-free sealed cartridge bearing assembly that keeps out dirt, mud, and water for long bearing life.A good quality bottom bracket for traditional chain setsSuper-accurate bearings for smooth operation and improved durabilityDurable, hard-wearing sealed cartridge bottom bracket with square tapered spindle fittingMaintenance-free sealed cartridge bearing assembly keeps out dirt, mud, and water for long bearing lifeFast and easy installation without adjustmentNarrow body allows clearance for cable routing under the bottom bracket
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl design as well as a flange, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. The inner flange is also there to provide additional comfort and protection. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl design as well as a flange, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. The inner flange is also there to provide additional comfort and protection. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl flangeless design, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl flangeless design, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The Shimano BB-UN300 Square Tapered is a good quality bottom bracket for traditional chain sets with super-accurate bearings for smooth operation and improved durability. It uses a maintenance-free sealed cartridge bearing assembly that keeps out dirt, mud, and water for long bearing life.A good quality bottom bracket for traditional chain setsSuper-accurate bearings for smooth operation and improved durabilityDurable, hard-wearing sealed cartridge bottom bracket with square tapered spindle fittingMaintenance-free sealed cartridge bearing assembly keeps out dirt, mud, and water for long bearing lifeFast and easy installation without adjustmentNarrow body allows clearance for cable routing under the bottom bracket
Cateye's Tight Kinetic Rear Brake Light is tough, highly waterproof and features a range of clever innovations designed to keep you safe.Waterproof design rated to IPX72x AAA batteries (included) provide long run time of up to 180 hours5 LEDs with 3 modes - 2 flashing, 1 lightingSimply switch between modes with one buttonFlexTight bracket is quick and easy to use on seatpost or seat staysTough and versatile, the Tight Kinetic uses 5 LEDs to help you remain seen out on the road and is breeze to use thanks to its single button operation and FlexTight bracket. Thanks to the included AAA batteries, the Tight Kinetic can run for up to 180 hours, while 3 modes give you a range of options to choose from. If you want a great value rear light, the Cateye Tight Kinetic Rear Brake Light is a great choice!
The Cateye Reflex Auto Rear Light has been produced with built in reflectors that exceed international standards and automatically turns on & off using light and motion sensors. The Reflex Auto will automatically turn on whenever both darkness and motion are detected by the motion and light optic sensors, providing the rider safety both while the light is turned on and while functioning solely as a reflector.5 LEDsGreater than 180-degree visibilityAutomatically turns on / off by light and motion sensorsEmits light for 50 seconds after the bike stopsBuilt-in reflectors that meet highest government standards (USA, Great Britain, Europe and Japan)OptiCube lens technologyAAA alkaline battery x 25 modesMode memory functionSP-5 bracket (ø21.5-31.8mm) and Rear rack bracketWeight 82gDesigned in JapanRUNTIME:Constant mode: 30hrsFlashing mode: 100hrsRapid mode: 60hrsLong-life mode: 120hrsPulse mode: 30hrsTECHNOLOGIES:Auto Light - Auto on/off controlled by motion & optical light sensors to automatically turn the light on when darkness of motion is detectedReflector - Our reflector technology exceeds the highest government standards around the worldOpticube - Our proprietary OptiCube lens technology maximizes brightness for greater visibilitySide Visibility - Provides visibility from the side to increase safetyAll Weather - Can be used in rainy weather
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl design as well as a flange, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. The inner flange is also there to provide additional comfort and protection. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The IceToolz Shimano /ISIS 8 Pin BB Tool is for cartridge bottom brackets and chainring/lockring with 8 external notches. For use with 32mm headset wrench.For Shimano/ISIS Drive compatible cartridge BBs and chainring lockring with 8 external notchesMade from Cro-Mo SteelFor use with 32mm headset wrench
Race Face's Getta Grips offer the perfect combination of tackiness, durability and cushioning to create one of the best lock-on grips around! Tapered inner core to prevent twisting with secure single lock-on collarProprietary RF rubber compound is tacky, durable and provides excellent cushioningDirectional hex pattern underside improves gripIncreased diameter at the end of grip keeps hands from blowing off barsLightweight at just 93g (30mm)The Getta Grip is designed to give the ideal combination of comfort, tackiness and durability, giving you a grip that is a joy to hold, even on the longest, roughest days in the saddle. The proprietary RF rubber compound strikes a brilliant balance of cushioning, grip and durability, with the hex pattern on the underside improving grip and the increased diameter at the end stops your hands blowing off the grips when the terrain gets rowdy. Securing the grip in place is a single lock-on collar, which works in conjunction with the tapered inner core to prevent twisting, so even if you're a serial throttle gripper, these grips will stay in place. Lightweight at just 93g per pair, the Race Face Getta Grip Lock-On Grips will take pride of place at the end of your bars and offer superb all-round performance.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl flangeless design, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl design as well as a flange, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. The inner flange is also there to provide additional comfort and protection. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl design as well as a flange, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. The inner flange is also there to provide additional comfort and protection. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
SunRace cassettes offer compatibility with all brands of chains and drivetrains. They are as reliable and hard wearing as the leading brands of cassettes. Compatible with Shimano and SRAM drivetrains.
Crank Brothers Multi 10 Multi Tool is a simple, stripped back to basics tool that just gives you what you need and nothing extra. With a selection of 10 key tools (2, 2.5, 3, 4, 5, 6 & 8mm hex keys, T25 Torx key and a Phillips/flat head screwdrivers), the Multi 10 is lightweight, incredibly durable thanks to its lifetime warranty and just what you need if you like to pack light and just want the tools for basic jobs on your bike.
Race Face's Getta Grips offer the perfect combination of tackiness, durability and cushioning to create one of the best lock-on grips around! Tapered inner core to prevent twisting with secure single lock-on collarProprietary RF rubber compound is tacky, durable and provides excellent cushioningDirectional hex pattern underside improves gripIncreased diameter at the end of grip keeps hands from blowing off barsLightweight at just 93g (30mm)The Getta Grip is designed to give the ideal combination of comfort, tackiness and durability, giving you a grip that is a joy to hold, even on the longest, roughest days in the saddle. The proprietary RF rubber compound strikes a brilliant balance of cushioning, grip and durability, with the hex pattern on the underside improving grip and the increased diameter at the end stops your hands blowing off the grips when the terrain gets rowdy. Securing the grip in place is a single lock-on collar, which works in conjunction with the tapered inner core to prevent twisting, so even if you're a serial throttle gripper, these grips will stay in place. Lightweight at just 93g per pair, the Race Face Getta Grip Lock-On Grips will take pride of place at the end of your bars and offer superb all-round performance.
Race Face's Getta Grips offer the perfect combination of tackiness, durability and cushioning to create one of the best lock-on grips around! Tapered inner core to prevent twisting with secure single lock-on collarProprietary RF rubber compound is tacky, durable and provides excellent cushioningDirectional hex pattern underside improves gripIncreased diameter at the end of grip keeps hands from blowing off barsLightweight at just 93g (30mm)The Getta Grip is designed to give the ideal combination of comfort, tackiness and durability, giving you a grip that is a joy to hold, even on the longest, roughest days in the saddle. The proprietary RF rubber compound strikes a brilliant balance of cushioning, grip and durability, with the hex pattern on the underside improving grip and the increased diameter at the end stops your hands blowing off the grips when the terrain gets rowdy. Securing the grip in place is a single lock-on collar, which works in conjunction with the tapered inner core to prevent twisting, so even if you're a serial throttle gripper, these grips will stay in place. Lightweight at just 93g per pair, the Race Face Getta Grip Lock-On Grips will take pride of place at the end of your bars and offer superb all-round performance.