The FSA Hammer 1 1/8 Inch Threadless Headset is designed for BMX and Freeride bikes and features forged and CNC machined steel cups and oversized caged ball bearings.1-1/8,For BMX / Freeride12mm Deep Cup designNylon top cover & plastic sealForged and CNC machined steel cupsUpper: Ø5/32x20 caged ball bearingsLower: Oversized Ø3/16x20B caged ball bearingsStack Height 12.3+11.9=24.2mmSpares:Top Bearing: MR013Bottom Bearing: MR002Crown Race: H6010
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Velotoze have completely redesigned their road cycling shoe covers to make them more durable, easier to get on, and easier to care for. They are still made from their signature, lightweight, waterproof material but we have reinforced the bottom of the shoe covers so they last longer. Velotoze Tall 2.0 Shoe Covers are designed for road biking on cool, foggy or misty days. Whether it s race day, training day or just another commute to the office, Velotoze Tall 2.0 Shoe Covers will keep your feet warm and comfortable.
The Master Fixed Combination Cable Lock is 1,2m long and features a 8mm diameter twisted steel for maximum strength and flexibility. The protective vinyl coating protects against scratches. The 4-dial combination security offers keyless convenience. The Limited Lifetime Warranty provides peace of mind from a brand you can trust.Twisted steel for strength and flexibilityProtective vinyl coating helps prevent scratching4 dials fixed combination security for keyless convenienceSelf-coiling for easy storageCable Length: 1.2mOutside Diameter of Cable: 8mmColour: Black
Designed to meet the needs of the burgeoning Gravel bike market, the Overide is Hutchinson's versatile all-rounder. A high-volume casing with bead to bead reinforcement and fast-rolling semi-slick design ensures the Overide is ready for anything!High-volume semi-slick tyre designed for gravel racing and ridingFast-rolling tread design excels on gravel paths and roadsSupple 127tpi casing is tubeless-ready for a light, tough and responsive feelLightweight at just 350g (700x35c)Excelling in a range of conditions, the Overide features a semi-slick design that rolls well on tarmac and gravel surfaces, yet still provides excellent grip in the corners and good traction when climbing on loose surfaces. The high-volume casing provides excellent cushioning over rough terrain, which is further enhanced by the supple 127tpi construction. The casing allows the tyre to be run at lower pressures to improve comfort, while also increasing traction. The reinforced sidewalls also offer improved puncture protection, so you can run low pressures without worrying about ruining your race or ride. Despite the excellent level of protection, the Overide is also exceptionally light for such a high-volume tyre, weighing in at just 350g (700x35c). Light, tough and versatile, the Hutchinson Overide is perfect for getting the miles on a range of surfaces.
The Hope Fortus 30 Front Wheel features a wide and optimised rim profile with a 30mm internal width to improve tyre contact area and traction. The Fortus 30 is built to be incredibly strong, making it an ideal choice for hard-hitting enduro and downhill enthusiasts.Incredibly strong 30mm ID welded and eyeletted 6061 T6 Aluminium tubeless ready rim (Tape and Valves included)Durable Hope Pro 4 hubs with stainless steal sealed cartridge bearingsLightweight & strong Sapim Race DB spokes and brass nipplesComplete Fortus 30 wheelset weight from 2230gAs well as being compatible with 2.2-2.6 inch wide tyres they are also tubeless compatible; just add tape, valves & sealant and away you go! The welded and eyeletted rim is constructed of a strong and durable 6061 T6 aluminium, the double butted spokes are black Sapim race stainless steel and the nipples are silver brass. The wheels come equipped with Hope s Pro 4 hub. The boost front wheel option comes built with a 110x15mm boost specific hub. All the wheels are machine built and hand finished in Barnoldswick.How could Hope possibly follow on from the legendary Pro 2 It was always going to be a tough act to follow. But with the Pro 4, Hope have seemingly done the impossible. With a ground up redesign, the Pro 4 hub takes everything that made the Pro 2 great and brings it bang up to date. With larger diameter flanges to help increase stiffness on modern 27.5 and 29 inch wheels with no weight increase, the Pro 4 uses Hope s bullet proof sealed stainless steel cartridge bearings that make for an extremely reliable centrepiece to your wheelset.
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
Introducing the K-Edge Gamin Max Combo Mount. The strongest K-Edge Mount yet for today's heaviest computers, cameras and lights. Upgrade to the Max Combo for a solid and clean platform for your cycling electronics.CNC Machined AluminiumCombo (Computer on top with a light or camera underneath)Garmin approved replaceable computer insert protects computer tabsAnodised black with laser etched logosMade in-house, Boise, Idaho USACompatibility: Garmin Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820)Combo compatible (GoPro style light/camera interface)Weight 60gK-Edge Lifetime warranty
Aztec replacement brake blocks for road brakes. The brakes may also be suitable for some types of U-type brakes. They offer excellent value for money and are supplied with nuts and dished washers for accurate alignment and toe-in.
Aztec replacement brake blocks for V-brakes. These brake pads are excellent value for money and offer no squeal as well as long life performance even in the most adverse weather conditions.
The PLT Ergo Handlebar is constructed from a high strength, yet lightweight, aluminium alloy. Due to these properties this particular alloy is commonly used in the aircraft industry. The double butted design allows for lower weight whilst maintaining strength. The oversized 31.8mm clamp diameter increases strength and rigidity, reducing unwanted flex. The new and improved oversized ergonomic top section offers a greater selection of comfortable handlebar positions. Road racing drop handlebarLightweight, high strength aluminium alloy constructionSingle recessed groove cable routingErgonomic design offers a choice of comfortable positions70mm Reach, 125mm DropWeight from 275 grams
Mavic's entry level all-road rim, the A119 is a great value rim for a trekking or touring bike built for sturdiness on a budget. Single eyelets make for a good strong wheel build and the wear indicator is handy for knowing when replacement is needed.ETRTO compatible size: 622 x 19Recommended nipple length: 12 mmRecommended rim tape: 622 x 20 x 0.6Recommended tyre widths: 28 to 47 mmValve hole diameter: 8.5 mm, supplied with Presta adaptor
Mavic's mid range all-road rim, the A319 is a great choice for trekking and touring, along with everyday commuting or hybrid use. At 595g, it is a good weight for a strong all-road rim, and with double eyelets the tension of the spokes are spread over a larger area and hence less susceptible to damaging the rim under extreme conditions.ETRTO compatible size: 622 x 19Recommended nipple length: 12 mmRecommended rim tape: 622 x 20 x 0.6Recommended tyre widths: 28 to 47 mmValve hole diameter: 8.5 mm, supplied with Presta adaptor
The Threadsave Seat Clamp from M Part is a technically advanced seat tube clamp with rotating thread inserts that prevents the possibility of thread damage and bent bolts. The design of this clamps gives a more even spread of stress around the seat tube.A technically advanced seat tube clampRotating thread insert prevents possibility of thread damage and bent boltsResults in a more even spread of stress around the seat tube of the frameBlack anodised aluminium alloy with stainless steel hardwareNeat, light and very functional
The KMC X10 is a high performance and extremely durable chain compatible with 10-speed Shimano and SRAM derailleur systems. The X10 chain is non-directional and weighs from 246g.
Inspired by MET s award-winning professional cycling helmet the Trenta, the MET Vinci exceeds the standards of performance and safety, delivering an unmatched price-performance ratio.Outer shell construction: In-MouldInner shell: Shock absorbing polystyreneStraps and Divider: Adjustable cam dividerComfort: Hand washable comfort padsFit system: Safe-T DUO, vertical adjustment and ponytail compatibleVentilation: 16 Vents, Internal air-channellingSafety: MIPS-C2Be seen: Reflective rear stickerCompatibility: MET Dualgel front padTwo dedicated ports designed for securely docking sunglasses on longer climbs or during your coffee break. The Vinci also comes with hand washable comfort pads, a Safe-T DUO fit system with vertical adjustment and its ponytail compatible too. With 16 vents there s plenty of cooling to keep you from overheating.Size Chart:
Zipp s race-specific Tangente Speed Road Tyres provide the crucial tools riders demand from high performance tyres, offering superior durability, rolling resistance and cornering grip.57A durometer rubber provides low rolling resistance & excellent gripWater sipping tread pattern provides improved cornering gripDurable and puncture resistant 220TPI casingLightweight and durable folding beadThe Tangente Speed Road Tyres are major upgrades over Zipp s previous offerings in vital qualities most important to road cyclists. For starters, Zipp uses a more advanced durometer rubber, almost 12 months in development, for lower rolling resistance while also gaining improved cornering grip and tread longevity. This enhanced longevity and performance was confirmed by internal testing showing that both rolling resistance and grip both actually improve in the first 100 miles as the tire breaks in. Beyond this, the Tangente Speed also has improved puncture resistance thanks to the tough but lightweight 220 TPI nylon casing that also makes for an extra supple ride. If you want a fast, durable, grippy and comfortable road racing tyre, look no further than the Zipp Tangente Speed Road Tyre!
Have you ever had the struggle of trying to inflate your tubeless tyre system with nothing but a track pump Help is at hand, introducing the Airshot.Airshot has been developed to enable hassle free inflation of tubeless tyres without the need for a compressor. Pressurised using an ordinary track pump, air can then be released in a rapid but controlled fashion via a release tap seating troublesome tyres on your rims.Dimensions : 39.5 x 11 x 8 cmApprox. Weight : 0.620 kg