The Lezyne Smart Energy Caddy XL is an innovative top tube bag featuring a touch screen compatible smart phone holder and an additional 0.5 Litre storage compartment. The phone holder is watertight with extra reinforcement for additional smart phone protection. It features removable straps exposing its integrated rivets, which makes it compatible with top tube mounting holes (compatible bike only, bolts not included). Constructed from durable materials and an EVA foam foundation and an easy access zipper, the Smart Energy Caddy XL is a perfect organiser for adventure cyclists, gravel racers and more.
Genuine Campagnolo cable sets for Ultrashift and Powershift system. The Campagnolo Ergopower cable set is perfect all your Campagnolo equipped bike. Pack comprises of inner and outer cables and end caps for brake and gear.Suitable for Ultra Shift or Power Shift SystemsCompatible with 10 or 11 speed systemsUltra Low friction cable casingsLow friction stainless steel inner cablesPack Contents:Cable casings2 x Brake cables2 x Gear cablesFerrules and end caps
The Park Tool LRT-3 is designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks.Fits chainring of Specialized, Cannondale and FSAFor lockrings with 47 48mm outside diameter and 4 or 8 notchesFits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torqueConstructed of 4140 heat treated steel and plated for long life
Designed to fit FSA's Power Drive cranks, this Power Drive bottom bracket uses a forged hollow cro-moly axle with sealed cartridge bearings in forged aluminium cups for smooth and stiff performance. With the addition of double snap seals for water and dirt protection this bottom bracket is built to last.Weight: 325g
The FSA Orbit 1.5E ZS 1 1/8 Inch Threadless Headset is for tapered 50mm/63mm OD head tube and comes with an alloy top cover, forged alloy and CNC machined alloy cups.1.1/8", 36°×45° ACBFor tapered 50mm/62mm OD Head Tube1.1/8" steererAlloy top coverUpper: Forged alloy cup with ACB (blue seal)Lower: 1.5" CNC machined alloy cup with ACB (blue seal)Stack height: 16.9 + 2.9 = 19.8mmWeight: 129.6gSpares:Upper Bearing: TH873 (160-1648)Lower Bearing: TH073 (160-6761)Crown Race: 1.1/8 (H6089, 160-5540)
Designed to fit FSA's Power Drive cranks, this Power Drive bottom bracket uses a forged hollow cro-moly axle with sealed cartridge bearings in forged aluminium cups for smooth and stiff performance. With the addition of double snap seals for water and dirt protection this bottom bracket is built to last.Weight: 325g
Don't let rain and mud slow you down. With the Cube Acid Mud Blocker for your rear wheel, full-gas trail riding knows no limits. An extra spray protection lip stops the dreaded skunk stripe on your back. Comes with 6 cable ties for the perfect hold and an optimised design with elongated sides for maximum stability. The included protection foils effectively keep frame scratches at bay.Protects against wheel sprayQuality plastic constructionFor 26", 27.5" and 29" tyresMaximum tyre width up to 2.6"Includes 6 cable tiesFrame protection foils to prevent scratching the seat staySpray protection lipOptimised adjustment for maximum stabilityWeight: Short 190g / Long 220gDimensions: Short (WxL) 95 x 528mm / Long (WxL) 95 x 605mm
High-speed descents can get really dirty in bad conditions. That's why Cube came up with the Acid Mud Shield. It keeps the spray off your face so you can focus on the important stuff: shredding to your heart's content. It bolts on quickly and easily and is just as uncomplicated to remove. The Mud Shield's extended wings with rubber pads protect your fork against scratches and fend off dirt. Compatible with Fox, Suntour, Öhlins and Marzocchi forks.Protects the face from front wheel sprayQuality plasticFor 26", 27.5" and 29" MTB forksMaximum tyre width up to 2.6"Includes bolts for Fox 32, 34, 36, 38, 40 (2021), 49, AWL, SR Suntour, Ohlins and Marzocchi forks with Fox chassisFork scratch protectionIntegrated fork spray protectionOptimised adjustment for maximum stabilityWeight: Short 105g / Long 124gDimensions: Short (WxL) 80 - 125 x 340mm / Long (WxL) 80 - 125 x 405mm
The Shimano GRX FC-RX600 Chainring, with its gravel specific ergonomics, optimised gearing options, rugged reliability and quiet and stable drivetrain, sets itself apart from the rest of the component world.Replacement 40t 11 speed single chainring for the FC-RX600-1 1X cranksetReplacement 30t inner chainring for the FC-RX600-11 and 10 speed cranksetReplacement 46t 10 speed outer chainring for the FC-RX600-10 double cranksetGenuine Shimano replacement parts
The original ergonomic grips for touring and fitness cyclists. The worldwide leader in function, material and craftsmanship, the GP Series prevents numb fingers, aching hands and forearms.Carbon friendly 100% recyclable aluminium clampsMade from 100% German, TUV-certified rubber compoundsSize: small: 92mm cross section, large: 102mm cross sectionWeight: 195g (Approx.)The ergonomic grip has been made from a 100% German, TUV-certified rubber compound that has been infused with a medical-grade white mineral oil for superb flexibility and durability. A forged aluminium clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
Designed to fit FSA's Power Drive cranks, this Power Drive bottom bracket uses a forged hollow cro-moly axle with sealed cartridge bearings in forged aluminium cups for smooth and stiff performance. With the addition of double snap seals for water and dirt protection this bottom bracket is built to last.Weight: 325g
The original ergonomic grips for touring and fitness cyclists. The worldwide leader in function, material and craftsmanship, the GP Series prevents numb fingers, aching hands and forearms.Carbon friendly 100% recyclable aluminium clampsMade from 100% German, TUV-certified rubber compoundsSize: small: 92mm cross section, large: 102mm cross sectionWeight: 195g (Approx.)The ergonomic grip has been made from a 100% German, TUV-certified rubber compound that has been infused with a medical-grade white mineral oil for superb flexibility and durability. A forged aluminium clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The Park Tool LRT-4 is designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900 and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminium for a perfect fit and to prevent marring expensive parts.Machined flat face for optimal lockring engagementFor lockrings with 41mm outside diameter and 16 notches36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque6061 aluminium construction
Light weight and burly, the Race Face Narrow/Wide chainring is more than just an oxymoron by name. Strong enough for downhill duties, yet light enough for XC whippets, the Race Face Narrow/Wide chainring is the solution to your woes. Machined from 7075 aluminium and tested in the deepest darkest forests of Vancouver you know this chainring will last.Performance enhancing Narrow/Wide tooth profiling enhances chain retention and creates a strong, secure platform to put power through, plus the stiff 4mm thick 7075-T6 aerospace grade strength aluminium is constructed in an i-beam cross section increasing load transfer without flexing. Coming complete with reversible laser etched graphics, you can decide whether you display the logo or run a more subtle set-up. Compatible For: 9, 10, 11 & 12 speed.Weights from 37g
Light weight and burly, the Race Face Narrow/Wide chainring is more than just an oxymoron by name. Strong enough for downhill duties, yet light enough for XC whippets, the Race Face Narrow/Wide chainring is the solution to your woes. Machined from 7075 aluminium and tested in the deepest darkest forests of Vancouver you know this chainring will last.Performance enhancing Narrow/Wide tooth profiling enhances chain retention and creates a strong, secure platform to put power through, plus the stiff 4mm thick 7075-T6 aerospace grade strength aluminium is constructed in an i-beam cross section increasing load transfer without flexing. Coming complete with reversible laser etched graphics, you can decide whether you display the logo or run a more subtle set-up. Compatible For: 9, 10, 11 & 12 speed.Weights from 37g
The Continental Grand Prix Tyre is a comfortable all-rounder that has been written into cycling history. With the PolyX-Breaker we introduce technological know-how from automotive manufacturing to the bicycle tyre sector. Polyester has been used successfully in car tyres for years and has proven its worth. The extremely resilient polyester fibre is woven finely as a cross mesh. This way a high density of fabric is achieved which not only makes our breaker more robust against foreign objects, but also makes it particularly puncture resistant. The BlackChili compound is the unassailable specialists for combining compound characteristics. Grip and rolling resistance are no longer adversaries. Outstanding handling characteristics from the first to the last kilometre.Neutral design and solid construction for sporting rides at the highest levelPuncture protection, comfort and decent grip make every ride hassle freeExcellent puncture protection thanks to PolyXBreaker puncture protectionExcellent grip, high mileage and efficient rolling thanks to BlackChili compoundMade in Germany
The lightest Dynaplug yet, the Racer Ultralight Tyre Repair Kit uses tough glass-reinforced injected nylon construction to get the racer's already low weight down to a barely there 14 grams. Also included is a custom silicon holder, tested for a year in the back country of California and the UK, this lightweight mount fits under your bottle cage and holds your racer securely and rattle-free.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-rideWhen needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool, depositing the repair plug in the tyre, done!The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tapeNo need to remove the tyre, no messy glues or solvents, just plug and go, go, GO!The double-ended racer holds two preloaded insertion tubes; one with a standard soft nose plug for standard holes and one with an extra-large Megaplug for fixing more serious tyre damageEach is covered by a waterproof CNC'd cap, so the plugs are kept ready to go at a moment's notice, even after being strapped to your bike for monthsWeighs in at just 23 grams! so even the weeniest of weight weenies have no excuses. The 93 mm length is easy to store in a pocket or strapped to a frame for faster accessA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationKit includes the tool itself with both standard and mega plug stainless steel insertion tubes, 2 x Megaplugs and 3 x soft nose standard plugsMade with pride in the USA with patented technology and warrantied for life under normal usage
Keep yourself free from spray and dirt this winter with these SKS Bluemels Stingray mudguards. The matt black design provides a stylish look and provides a nice finishing touch to your bike. With high-grade plastic construction and alloy core ensure high durability. Suitable for 700c wheels and are protected from corrosion and UV-Light. They come ready to fit with everything included making installation quick and easy.45mm Profile width3mm Stainless steel staysEasy fit ASR joint, angle adjustable
Keep yourself free from spray and dirt this winter with these SKS Bluemels Stingray mudguards. The matt black design provides a stylish look and provides a nice finishing touch to your bike. With high-grade plastic construction and alloy core ensure high durability. Suitable for 700c wheels and are protected from corrosion and UV-Light. They come ready to fit with everything included making installation quick and easy.45mm Profile width3mm Stainless steel staysEasy fit ASR joint, angle adjustable
The Birzman Feexman E-Version 20 Multi-tool is a lightweight 20 function multi-tool designed to get you back up and running quickly. With 20 durable tool bits made from chromed vanadium and a CNC-machined aluminium body, the Feexman weighs just 165g and is compact in size, so you can easily store it in a saddle bag or hydration pack. The tools include 2/2.5/3/4/5/6/7/8mm hex keys, T25 torx key, flathead & crosshead screwdrivers, 3.2/3.3/4.3/4.4/Mavic spoke wrenches, tyre lever, disc adjuster, knife, can open and a 9-12 speed chain tool, so you'll have pretty much all you need to make a wide range of adjustments or repairs to your bike and more besides. Lightweight, compact and durable, the Birzman Feexman E-Version 20 Multi-tool is perfect for repairing or adjusting your bike on the go.