Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Proviz Reflect360 Cycling Jacket is the ultimate in hi-vis Cycling clothing! Using an innovative material, you'll be sure to stand out to others at night, while the excellent fit, breathability and waterproof properties make it a must have for anyone who cycles at night!100% reflective outer-shell is also waterproof with seam-seals and storm zipBuilt in air vents at the front, under-arm and shoulder/back for enhanced breathabilityInside mesh lining with fleece-lined collar for added comfortAdjustable waistband and cuff for getting the perfect fitInside chest and back pockets for storageUtilising millions of tiny, highly reflective glass beads, the innovative material used for the Reflect360 Cycling Jacket reflects light back from vehicle headlights, helping you to be seen more clearly on the road at night. Its also highly breathable (10,000gm/24hr) and exceptionally waterproof (10,000mm). The inner seams of the jacket are taped too, to prevent water getting in at sewing lines.The jacket features a micro-fleece lined collar for extra warmth and comfort during colder months. it also has a soft cotton mesh lining which acts as a climate control mechanism. The mesh increases airflow by maintaining separation between your skin/shirt and the outer layer of the jacket. This allows your body to maintain a more consistent comfort level, without the need to constantly add or remove layers.Jacket incorporates two outer chest pockets, one inner chest pocket and one large back pocket, so you will not struggle to find somewhere to put the items you need when you're out cycling. The outer chest pockets also double as additional vents to help cool you down on warm days. There's also a ventilation flap in the back of the jacket helps to combat any discomfort. It lets hot air out but won't let any inclement weather in.
The Hiplok Homie is a 1.5m high security chain lock designed to secure multiple bikes at home (or wherever you choose to keep your beloved collection) in as practical a way as possible. The Homie offers a huge variety of locking options, while its high quality durable fabric sleeve protects against unwanted scratching of frames. The accompanying purposefully designed integrated wall hook allows the Homie to be stored neatly on a wall when not in use, keeping it away from dirty floors and preventing it being a trip hazard. Tough, no-fuss, stay at home protection.Security Level: High RiskSecurity Rating: Sold Secure Gold Award (Please see tab)10mm Hardened Steel ChainRemovable 600D Outer Washable Sleeve12mm Hardened Steel ShackleSteel Lock Body with Brass MechanismImpact Resistant, Super Tough Nylon Case3 Keys Included Key Coded / ReplaceableToughened Nylon Hook for Wall MountingLocking Circumference: 150cmApprox. Weight: 4.6kg
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.