The Fizik Vento Microtex Tacky Bar Tape is a lightweight, super grippy tape created to give you an advantage in your next race.2mm thin construction maximises controlTacky finish promotes optimum gripThe race bred Vento range of bar tapes has been designed for ultimate control and reduced weight. At 2mm thick, the Microtex variety is the thinnest option promoting incredibly sharp handling and control. The Tacky finish provides a sticky, nonslip surface with a raised texture for ultimate grip in every condition.
The Shimano SM-RT64 disc brake rotors offer secure and easy set-up using the proven Centre-Lock system. These brake discs are ideally suited to Shimano SLX and Deore disc brake systems. They have a precision cut stainless steel braking surface which improves pad clearing in muddy conditions while aiding cooling under high load, increasing pad performance and life. The alloy spider supports the rotor surface, increasing rigidity and reducing weight.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Motivating yourself to ride in the rain is hard enough but to do it without mudguards is even harder! Trying to get comfy on your saddle when your behind is soaking wet and covered in mud is almost impossible. The best way to prevent this is with a clip on fender and the Topeak Defender XC11 Rear Mudguard has all the features to keep you and your bike protected from the elements. Constructed from impact resistant plastic this fender is lightweight and attaches to your seat post in seconds thanks to the quick release mounting system. Unlike lots of rear fenders which stay in one position this one can be adjusted to an angle that suits you so you can guarantee you stay protected.
The Park Tool Sliding T-Handle Hex Wrench is a professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit.Carefully selected combination of Chrome Vanadium and S-2 tool steelsUnique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortlessMachined, chamfered tips allow easier insertion into hex fittingsIntegrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easySliding T-handle creates increased leverage and multiple access positions
The Shimano SM-RT66 disc brake rotor gives excellent performance using the 6-bolt international standard mounting system. These brake discs are ideally suited to Shimano Zee and SLX disc brake systems when using 6-bolt, non-centre-lock hubs. They have a precision cut and drilled stainless steel braking surface which improves pad clearing in muddy conditions while aiding cooling under high load, increasing pad performance and life.
The Builders Bar from Clif is new and has been designed for athletes who want and need to build muscle during periods of intense training. The Builders Bar is high in protein and offers 20 grams per bar for growth and muscle maintenance. Clif use natural ingredients such as soya protein, oats, nuts, peanut butter and cocoa and works best when eaten directly after a workout session.20 grams of protein per bar for muscle growth and maintenanceFree of hydrogenated oils and sugar alcohols
Introducing the Capgo BL Long Dropper Cable Kit. A complete cable kit to enhance the performance of your Dropper post. Through the interaction of the PTFE greased housing with Capgo s "Speed Slick" wire, the function of most mechanical dropper posts can be significantly improved.Low expense - high performanceWorld of MTB - best of 2018Contents:1x Capgo BL 1900mm Shift Cable Housing 4mm1x Capgo OL 2200mm Shift Inner Wire 1.1mm Speed Slick Stainless Steel for Shimano2x Capgo OL Sealed End Cap for 4mm Shift Cable housing Black
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
The Prism Carbon is Elite s new top-of-the-line bottle cage and is light, ergonomic and provides a unique design and easy-access storage for your bottles when space on the bike is limited. The Prism Carbon is designed to allow a practical side insertion and removal of the bottle that is compatible with all frames but is particularly suitable to MTBs, smaller bike frames or sloping top tubes. The side-entry design is particularly useful for mountain bikers who have smaller bike frames or frame geometries that make carrying a bottle in a top-loading cage challenging. The Prism Carbon's lightweight carbon construction not only ensures stable bottle security and long-lasting performance, but also means the Prism weighs only 29g!
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
The Prism Carbon is Elite s new top-of-the-line bottle cage and is light, ergonomic and provides a unique design and easy-access storage for your bottles when space on the bike is limited. The Prism Carbon is designed to allow a practical side insertion and removal of the bottle that is compatible with all frames but is particularly suitable to MTBs, smaller bike frames or sloping top tubes. The side-entry design is particularly useful for mountain bikers who have smaller bike frames or frame geometries that make carrying a bottle in a top-loading cage challenging. The Prism Carbon's lightweight carbon construction not only ensures stable bottle security and long-lasting performance, but also means the Prism weighs only 29g!
Bring your A game on two wheels. The Agilis women s cycling gilet is designed to be worn on those colder mornings / evenings when a long sleeve jersey is too much. The gilet features rear pockets for nutrition and can be folded away into its own pocket when the temperatures rise. Fits closely over the Agilis short sleeve jersey. Ultralight windproof front panel with lycra rear panel for close fit and high breathabilityReflective stripe on back for visibility in low lightThree rear pockets
Bring your A game on two wheels. The Agilis women s cycling gilet is designed to be worn on those colder mornings / evenings when a long sleeve jersey is too much. The gilet features rear pockets for nutrition and can be folded away into its own pocket when the temperatures rise. Fits closely over the Agilis short sleeve jersey. Ultralight windproof front panel with lycra rear panel for close fit and high breathabilityReflective stripe on back for visibility in low lightThree rear pockets
Bring your A game on two wheels. The Agilis women s cycling gilet is designed to be worn on those colder mornings / evenings when a long sleeve jersey is too much. The gilet features rear pockets for nutrition and can be folded away into its own pocket when the temperatures rise. Fits closely over the Agilis short sleeve jersey. Ultralight windproof front panel with lycra rear panel for close fit and high breathabilityReflective stripe on back for visibility in low lightThree rear pockets