Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
Designed to match the Shimano GRX RX815 Di2 groupset, the GRX RX815 Di2 11-Speed STI Shift Levers & RX810 Calipers provide slick shifting and powerful braking in a sleek, stylish package that is perfect for your gravel or adventure bike.Gravel inspired lever and hood ergonomics for exceptional performance and comfortAnti-slip brake lever improves control in all conditionsProvides smooth, fast and light-action shifting performanceOversized 22mm pistons optimised for heat insulation, lightweight & stiffnessIncreased pad to rotor clearance & inline hose routing for low profile designThe GRX RX815 levers get the look and feel of their 11-speed road orientated levers, while adapting the hoods and levers to provide exceptional performance off the beaten track. As well as the specially designed hood shape to improve grip in wet and muddy conditions, the shifters use the same proven Di2 internals as others in the Shimano to provide incredible shifting performance. The lever is fully adjustable to accommodate different hand sizes via an easy to use reach adjustment. Braking isn't ignored of course, and the power and feel of the braking has been improved, especially when riding on the hoods. The GRX caliper offer excellent heat dissipation which means consistent braking power even on the longest or roughest descents. Providing slick shifting and powerful braking, the GRX RX815 STI Levers & RX810 Brake Calipers provide exceptional performance at a competitive price.
Race-pedigree technology comes to gravel the EA90 AX dropper brings your gravity gravel up to the next level. Featuring bulletproof DOSS-style mechanical internals with quiet operation thanks to spring guides, 2-position execution, and cable attachment from either direction for easy compatibility with all levers. Pair it with our Easton gravel dropper lever for a streamlined look. Features:Two positions; full up or full downBulletproof DOSS-style mechanical internals with spring guides for quiet operationCable attaches from either direction for compatibility with all dropper leversNew dual action drop-bar lever (sold separately) can be activated from the hoods or drops without compromising hand positionSpecification:Weight: 337gDiameter: 27.2mmMaterial: EC90 AlloyDrop: 50mm (350) / 70mm (370)Length: 350mm / 370mm
Welcome to the Insta360 GO 2 tiny action camera. Designed for maximum photography and filming performance in an ultra-lightweight and super-slim package, so you can continue to show off what you do best without being hindered by a large bulky camera.Hands-free useCan be mounted almost anywhere!Speedup and slow down time with Hyperlapse and slow-motion filmingAuto editingGiven outstanding reviews from not one, not two, but twelve of the leading tech reviewers all raving about its performance, the GO 2 is a 2560x1440@50fps, 26.5g, videography heavyweight in a lightweight body.FeaturesPOV Capture enables you to capture the very best Point of View footage. Being 6 times lighter than your traditional action camera with the same size image sensor, the GO 2 can fit neatly on your shirt, attached securely via the magnetic pendant included.Do not be mistaken, this is no small size, low-quality action camera, the GO 2's FlowState Stabilisation offers you buttery smooth goodness which removes shakes and bumps that many action cameras fall foul of. This means that whilst you're shaking it up and piling on the action, your video quality stays super cool ensuring to capture the best of every moment.Horizon lock allows the aerial fanatics to capture spectacular footage of acrobatics and aggressive moves whilst the horizon levelling algorithms keep your horizon central as your picture moves around.HDR Video mode allows you to enhance your footage by pumping up all the colours and enriching your life, because isn't everything better when it's brighter Just hit HDR mode and record life in all its splendour.Recorded an epic journey that you wish to speed through Then the GO 2's Hyperlapse technology allows you to smoothly speed up to six times the original recorded speed to give you an awesome Hyperlapse piece for all you travel junkies. And for the stargazers amongst you, the timelapse feature will not disappoint thanks to the clever AI algorithms that automatically adjust exposure, so you always get the very best shot. Now let's not get ahead of ourselves, you can also find every detail in your captures by hitting slow-mo and reduce your video to 4 times slower with a super-smooth 120fps.Calling all sea lovers, the GO 2 is IPX8 rated so you can dunk it up to 13ft of water making it ideal for surfing, pool parties, and shallow swimming or snorkelling. Add to this, the AquaVision AI tech makes your ugly blue haze from underwater shots disappear. Simply hit AquaVision in the app and the true colours of the underwater world will come to life.*Included Lens Guard must be installed on the camera for underwater use.The Charge CaseWhy mention the charging case Well, here's why. Firstly, charge this case up in just 30 minutes from your USB Type-C charger and you'll get up to 2.5 hours of shooting time, double what you'll get from most action cameras. Secondly, this case is a controller, capable of adjusting settings and hitting stop/record from up to 10m away, meaning you can hit record on your dog's journey even once they're already running away from you. Why buy a tripod when you have a case Fold-out the tripod legs on the back of your case and mount anywhere for instant tabletop shoots. Even better than that, grab the case in your hand and record like a selfie stick, or even screw in a selfie stick to the hole in the bottom if you fancy.The AppDownload the Insta360 App for all the control and editing for some of the features mentioned above. The app also allows you to adjust your filming to suit your feed, whether you're filming a reel or a post, change the aspect ratio between 16:9, 9:16, and 1:1 to create the perfect video for all your socials.Auto editing from FlashCut 2.0. takes your favourite clips and puts them in a unique personalised story and edits them in such a way that they play along to the beat of a soundtrack. This can be done via a chosen template or let it decide for you and create a masterpiece.Lastly, how do you know what it's looking at Well, the Insta360 app lets you preview videos in real-time over Wi-Fi and lets you adjust settings to get the very best shot before the action starts.What's In The Box In this kit you get either the 32GB or 64GB GO 2 camera depending on your selection and a multifunction charge case as mentioned above. The Lens Guard included helps to keep your GO 2 safe from scratches, drops, falls or any accidental damage and allows you to use it underwater.A wide range of mounting options come from the attachments included. The Magnetic Pendant for POV filming simply hangs around your neck and slides under your shirt, acting as a magnetic point for quick mounting to your chest through your clothing. The Pivot Stand features a sticky base and has a foldable design that allows you to easily angle your shots and store your camera in the smallest possible package. The Easy Clip mount enables you to clip your camera to a hat, strap, or headband and angle as you see fit. Lastly, you get one USB Type-C charge cable for fast 30-minute charging to keep you topped up, so you never miss a moment of the action.If you opt for the Strap Mount Bundle then you get the 32GB camera only but add to the list of mounts the Telesin Head Strap, Chest Harness, and Action Mount with prongs for fitting to widely used mounts thanks to the handy prong screw clip included in this bundle.Detailed Contents: 1x Insta360 GO 2 1x Lens Guard 1x Charge Case 1x Charge Cable 1x Magnetic Pendant 1x Easy Clip 1x Pivot Stand 1x QuickStart Guide 1x Telesin Head Strap (Strap Mount Bundle Only) 1x Telesin Chest Harness (Strap Mount Bundle Only) 1x Telesin Action Mount with prongs (Strap Mount Bundle Only)