Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl design as well as a flange, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. The inner flange is also there to provide additional comfort and protection. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The Effetto Mariposa Espresso Inflate & Repair takes all of the pain out of getting a puncture in your inner tube, tubeless tyre or tubular tyre. By combining an inflater with a sealant injector, the Espresso Inflate & Repair will help get you back up and running in no time.Combines tyre inflater with a sealant injector to get you back riding quicklyFlexible silicone hose fits directly to presta valves and is easy to useCaffelatex sealant seals holes in inner tubes up to 1mm and holes in tyres up to 5mm125ml size will inflate up to a 29x3.0 tyreNot only does the Espresso inflate your tyre back up to riding pressure, but the Caffelatex sealant also helps to seal holes up to 5mm. Caffelatex's formula contains microscopic silicate particles, allowing the sealant more time to seal holes. These particles are so small, at less than 2 microns in diameter, that the sealant is still highly fluid and easily coats the inside of your tyre or tubular. The formula also has a foaming action when the wheel is spinning, further helping to improve the sealing of any punctures.Combined with the inflating action and the easy to use flexible hose that fits directly to presta valves, should you puncture you can be back up and running in a matter of seconds. Easy to use and incredibly useful, the Effetto Mariposa Espresso Inflate & Repair is perfect for riders who want to fix a puncture in double quick time.
The Master Lock U-Lock features a 11cm wide hardened steel body for maximum strength and reliability. The 13mm diameter double locking shackle is made of hardened steel, offering extra resistance to prying, cutting and sawing. The disc key cylinder prevents picking. The Limited Lifetime Warranty provides peace of mind from a brand you can trust.Two lengths available with an extra length shackle (28cm) to fit more applicationsHardened steel body resists cutting, sawing and pryingDouble locking shackle withstands 2 tons of pull forceProtective vinyl coating helps prevent scratchingIntegrated disc keyed locking mechanism for maximum pick resistanceSliding dust cover protects keyway from dirt and moistureSoft grip for comfortable use, weather and scratch resistanceCarrier bracket included for easy transportationCertified: Sold Secure Gold, VDS, SBSC, Secured by design
Crank Brothers Cobalt Lock On Grips are the lightest around at just 65g and give you the lightweight and comfort of a foam grip with the convenience of a lock on design. Foam grips are hugely popular thanks to their light weight and vibration damping and comfort qualities, but their slide on design can be a pain. This is where the Cobalt comes in, combining both designs to create a grip that is comfortable and easy to use.
The perfect replacement for lost or broken Hope Tech reach adjustment screws or a great way to make your Hope Tech brakes unique and colour co-ordinated to your bike.
Constructed from durable materials and made to manufacturers exact specifications, these Bolt Thru axles from Brand-X are a reliable and competitively priced alternative to your fork's or frame's original. Featuring a lever less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you.Please use the size guide below and refer to your bike manufacturers specification for your bike to determine which axle you need.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The X-Tools Torx star key set comprises of 9 keys ranging from T10 - T50. With the increasing popularity of Torx head bolts in the MTB industry these days every tool box should contain at least one set of these keys.Included sizes, T10, T15, T20, T25, T27, T30, T40, T45, T509 Key setLong Handle
The Dynaplug Air Tubeless Road Tyre Repair & Inflation Kit is an all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Shorter Road version designed not to bottom out when used on narrower road slicks. For MTB tyres please use our MTB Air with a longer insertion tube to get past thicker MTB treadsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it's also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there's an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Vittoria Corsa is the top choice for Pro-Tour riders around the world. Featuring a supple, 320 TPI Corespun-K reinforced casing, and 4C Graphene G2.0 compound, the Corsa is one of the fastest tyres in the world and a proven race winner.One of the world's fastest tyres proven at the very top level by the world's best ridersLightly siped tread design is incredibly fast rolling and grippyReinforced 320 TPI Corespun K casing for increased sidewall protection and a supple rideG2.0 Graphene rubber compound is incredibly fast-rolling, durable and provides excellent gripThe Corsa G2.0 uses a 320TPI Corespon K casing to provide an incredibly smooth and supple ride, improving comfort and grip in all conditions. It also makes use of Vittoria's cutting edge G2.0 Graphene infused rubber compound that provides incredible durability and grip. If you want the ultimate fast tyre for racing, you need to try the Vittoria Corsa G2.0 Tyre!
The Corsa Control tackles greasy cobbles and rough roads with all the confidence of the classic Corsa. Sharing the same 320 TPI Corespun-K reinforced casing, and 4C Graphene G2.0 compound, the Corsa Control adds a textured shoulder tread providing increased grip on slippery surfaces.The world's best tyre made better improved wet-weather grip and extra puncture protectionTextured shoulder tread improves grip in all conditionsReinforced 320 TPI Corespun K casing for increased sidewall protection and a supple rideG2.0 Graphene rubber compound is incredibly fast-rolling, durable and provides excellent gripThe Corsa Control G2.0 takes the Corsa tread pattern and adds additional texturing and siping to the should tread along with a thicker puncture protection layer to help prevent punctures. This makes it perfect for winter or light gravel use, where riders want a fast, comfortable and grippy tyre they know they can rely on. None of these new features spoil the classic Corsa trademarks though. The Corsa Control G2.0 uses the same 320TPI Corespon K casing to provide an incredibly smooth and supple ride, improving comfort and grip in all conditions. It also makes use of Vittoria's latest cutting edge G2.0 Graphene infused rubber compound that provides incredible durability and grip. If you want the ultimate fast tyre for all conditions, you need to try the Vittoria Corsa Control G2.0!
The GP Chain Lock from Oxford is a quality, strong general use chain witch would prove more than a match for most. The GP Chain Lock has a convenient cloth chain cover to protect your paint work when locking up your bike.
The KMC Z7 is a simple, affordable chain that is compatible with 6/7-speed Shimano and SRAM derailleur systems. The Z7 consists of 114 links, is and non-directional.
KMC's MissingLinks are easy to mount and 100% reliable. To connect your chain by using a MissingLink, you do not need complicated and expensive tools. The KMC 7/8NR MissingLink is compatible with KMC Z8 + Z8RB / SRAM 7-speed + SRAM 8-speed chains. These chain links can be reused and are sold as a card of two pieces.7 & 8 SpeedSilverRe-usableCompatible with: KMC Z8 + Z8RB / SRAM 7-speed + SRAM 8-speed chains
Inspired by MET s award-winning professional cycling helmet the Trenta, the MET Vinci exceeds the standards of performance and safety, delivering an unmatched price-performance ratio.Outer shell construction: In-MouldInner shell: Shock absorbing polystyreneStraps and Divider: Adjustable cam dividerComfort: Hand washable comfort padsFit system: Safe-T DUO, vertical adjustment and ponytail compatibleVentilation: 16 Vents, Internal air-channellingSafety: MIPS-C2Be seen: Reflective rear stickerCompatibility: MET Dualgel front padTwo dedicated ports designed for securely docking sunglasses on longer climbs or during your coffee break. The Vinci also comes with hand washable comfort pads, a Safe-T DUO fit system with vertical adjustment and its ponytail compatible too. With 16 vents there s plenty of cooling to keep you from overheating.Size Chart:
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl design as well as a flange, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. The inner flange is also there to provide additional comfort and protection. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
Need to mount your Exposure helmet light to your TT extension You need the Exposure Lights Aero Extension Bracket! With a durable ABS plastic mount, you can quickly and easily attach your Exposure helmet light to your extensions. Neat and easy to use, this a great solution if you need to ride your TT bike in low-light conditions.
An easy to mount design for Exposure Trace lights, this Exposure Lights mount quickly attaches to regular round seatposts with ease and securely holds your Exposure Blaze light in place. Not compatible with some aero seatposts. Includes bracket and rubber band.