E-Bike Snow Foam has been developed by Tru-Tension for quick and easy cleaning, leaving a polished shimmering shine. Perfect for cleaning in a garage or shed without the need to rinse with water. Ideal for all E-Bikes, Road and MTB. Simply spray on Snow Foam and watch it instantly lift dirt from the surface. Wipe away without the need for water before buffing the surface clean. The perfect E-Bike cleaner. Our all-in-one instant action foam cleaner soaks into the dirt, lifting it away from the surface for an easy clean without the need for water. Once dry it leaves a polish which is buffed in to leave a high gloss finish. Perfect for cleaning indoors and without the need for water. Ideal for removing light dirt from frames and wheels. Safe to use on plastic and painted surfaces. Spray. Soak. Wipe. Buff. How to use your E-Bike Snow Foam Cleaner: Step 1: Spray onto frame, wheels or any painted, metal or plastic surfaces. Step 2: Leave for 5 – 30 seconds. The foam will go to work lifting the dirt and grime. Step 3: Wipe dirt away with a clean cloth. Step 4: Once dirt is removed, use a separate clean cloth (microfibre suggested) to buff the surface in circles to activate the polish, leaving a gleaming finish. Important: Do not use on braking components.
Guaranteed to optimise the performance and efficiency of any bottom brackets, hubs and headset bearings. As bearings become coated with Teflon and ceramic particles, friction and heat is dissipated which ensures bearings last longer and run smoother and quieter.
Directions: Get your bike wet Spray or brush Dirt Juice onto the bike and leave it to work its magic for no longer than 2 minutes, agitating the most stubborn areas with brush or sponge. If you prefer a bit more foaming action spray directly on to a brush and get to work with that. Rinse off with fresh water.
An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.
When you’re starting to lag, give yourself that essential kick of carbs quicker than ever before with these Go Isotonic Gels from Science In Sport. A dip in carbohydrates has been shown to be one of the major causes of fatigue during exercise and, since these gels are delivered without water, you get that essential long-term energy without the bloat that sometimes comes along with over-hydration. On top of that, since they don’t need to be put in the fridge, they’re dead easy to take on the go. Recommended Usage Consume 1-3 gels per hour to deliver approximately 60 grams of carbohydrate and maximize carbohydrate utilization rates. Where hydration is also important, SiS GO Isotonic Gels can also be consumed with SiS GO Hydro or with SiS GO Electrolyte to ensure a combination of both energy and fluid delivery during exercise. Directions for Use Simply tear off the top of the packaging and consume - there is no need to mix with water.
The strongest K-EDGE Mount yet for today's heaviest computers, cameras and lights. Upgrade to the Max XL for a solid and clean platform for your cycling electronics. Chosen by the best, year after year when quality, performance and craftsmanship matter. K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY and break away in a crash to protect the computer body. Compatibility: All Garmin Cycling Computers Combo (GoPro style light/camera interface) adapter compatible (K13-580-BLK sold separately) Payload Capacity: Top: 123g (example: Garmin 1030); Bottom: 242g on K-EDGE K13-580 Combo adapter (example: NiteRider 1800 or Cycliq FLY12)
Fully adjustable to make work on your fasteners and bolts easier, this Park Tool Torque Driver features a metal construction and a comfortable, ergonomic composite moulded grip. The rotating torque gauge on the tool's handle can be turned by hand or by hex for the optimum fastening force. Four magnetic bits (3mm, 4mm, 5mm, and T25) are stored in the tool's handle for easy access, ready for attachment to the driver's socket. An all-metal internal construction, housed in an ergonomic composite material for exceptional grip, makes the Adjustable Torque Driver ATD-1.2 a brilliantly durable and efficient workshop companion.
A very lightweight cap for any activity in the heat and glare of the sunshine. The pared-down construction provides a snug and secure fit without the weight and bulk of a traditional ball cap. Care Instructions Wash Cold/30° Delicate. No Bleach. No Tumble Dry. No Iron. No Dry Clean.
With a 4000mAh large battery and max 1000 lumens, CR1000 is designed for road riders that ride at night at fast speeds and over long distances. Featuring Ravemen's new anti-glare optical lens, CR1000 creates a T-shaped beam, illuminating the road with a floodlight for close-range distance and a bright spotlight for long-distance visibility whilst not dazzling other road users. With batter run extension times, the CR1000 could also be used for long-distance riding and racing. Anti Glare Lens The T shaped lens is the second generation anti-glare lens from Ravemen and it provides a T-shaped beam with an anti-glare cut-off line that creates no dazzle for other road users. Wired Remote Control A wired button allows you to change the level of brightness without releasing your grip. Conveniently, a long press on the wired button will activate maximum output for emergency needs. Battery Runtime Extension Extend the runtime of the battery by connecting an external power source for emergency lighting when the light is on low power. Micro USB Charging Port This light features a Micro USB charging port that's compatible with most phone chargers for fast and convenient charging. Intelligent Memory Circuit and Display An intelligent memory circuit remembers the last used brightness level and mode when turned on again. And it features battery level, charging indicators and auto power save mode when it has low battery. Durable and Waterproof Anodised Aluminium Body Quick-release design for easy slide-in/out and is compatible with handlebars of 22.2mm - 35mm. Plus, it features an IPX6 water-resistant anodised aluminium body for durability in all riding conditions. Run Time: Low Beam: High: 1000-lumens; 2 hours run time Mid: 600-lumens; 2.7 hours run time Low: 350-lumens; 5.8 hours run time Eco: 100-lumens; 25 hours run time Pulse Flashing: 500-lumens; 43.5 hours run time Rapid Flashing: 150-lumens; 45 hours run time Emergency: High: 1000-lumens
The Wheel Truing Stand TS-2.3deal for wheel truing up to 29""+ in size, with or without a tyre fitted, this top-quality workstand is a superb addition to any workshop setup. Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench — still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder coated heavy-gauge steel and is manufactured, assembled and calibrated in St. Paul, Minnesota. Strong, comfortable knobs, spring-loaded calipers, and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.
The aluminium backing plate reduces weight by almost 50% compared to the equivalent steel backing plate making these perfect for XC and road use.
How do you update a classic? These new shorts from dhb build on the base of their successful predecessor, refining a short with hundreds of positive customer reviews to bring them right up to date. dhb have combined years of customer feedback with hours of testing to improve the Aeron Shorts, now available in navy – with a new pad and improved grippers among the many refinements. One of the most versatile shorts available, the dhb Aeron Shorts are ideal for a wide range of cycling. From long days out to racing or commuting, these shorts have become the go-to option for thousands of riders who prioritise comfort and performance. Elastic Interface® Paris HP Chamois The Paris HP pad from Elastic Interface® features ultra-high density foam inserts under the sit bones to ensure a comfortable ride all day long. Three separate densities of foam have been used to ensure comfort, while also reducing the overall bulk of the pad. Click here to find out more about Elastic Interface. Fabrics that work with you The main body of the shorts is made from Granfondo from leading Italian fabric mill MITI. The perfect balance between compression and breathability, this fabric works with you on long days in the saddle to keep you comfortable, when other fabrics might start to let you down. MITI Granfondo is a combination of MITITECH ®POWER and Interpower® to create a performance fabric designed for athletes. MITITECH ®POWER gives you a stretchy, compressive fit for better muscle support, recovery time and comfort when in action. This is supported by Interpower® to provide excellent moisture transfer, drawing sweat to the outer surface of the fabric for an ever-dry effect that doesn't stick against your skin. The benefits – you stay more comfortable for longer and your body wastes less energy trying to cool itself down. The all-important details dhb have made sure every element of these shorts has been carefully considered, to make your next good ride a great one. A wide silicone gripper around the outside of the leg keeps the shorts in place as you pedal without being too restrictive. This upgraded gripper is more durable than before, keeping your shorts in place ride after ride.
Superior Anti-Fog Spray by Tru-Tension provides a long-lasting barrier against fog and mist while absorbing moisture. Spray on the inside of goggles, visors or glasses for anti-mist protection. It can also be used on the outside to help rain bead away. It’s safe to use on most glass and plastic surfaces. It can last up to 5 days but for best results apply every few days. How to use: Simply spray on and wipe away.
With the intelligent daytime running light mode and max 1200 lumens output, LR1200 is ready for your day and night riding, whether road cycling or gravel riding. Featuring a battery run time extension function, the light could be also used for long-distance bike travel or race. The light is IPX6 water resistance and built with a lightweight yet solid aluminium body to provide reliable performance even in harsh riding conditions. Special Wide Angle Lens Design: Providing wide and evenly-distributed light and side visibility for better, safer riding Intelligent Daytime Running Light Mode: In this mode, the light will switch automatically between rapid flashing level (high ambient light) and low brightness level (low ambient light). The light will also switch off after staying still for 2 minutes and switch on again with a vibration (auto on-off) Convenient USB-C Charging Port: Reversible connector to charge the light easily and no need to flip around looking for the correct orientation Battery Runtime Extension: Extend the runtime of the battery by connecting with an external power source for emergency lighting when the light is in low power, no need to worry about being left in darkness! IPX6 Water Resistance: Providing consistent and reliable output even in heavy rain Integrated anodised aluminium body: Lightweight yet solid aluminium case for better heat dissipation performance and long-term use Product Benefits: 1. Special Lens designed for riding, providing wide and even-distributed light and side visibility for a better and safer riding experience 2. Intelligent daytime running light mode with auto on-off function and light sensor for high/low ambient light conditions 3. Wired remote button(sold separately) to change brightness level safely without releasing the grip 4. 4000mAh high capacity battery for longer runtime and auto power-save function when the battery is low 5. USB-C charging port to charge your light easily 6. Durable anodized aluminium body with better heat dissipation and IPX6 water-resistance design for heavy rain 7. Intelligent memory circuit remembers the last used brightness level and mode when turned on again 8. Quick release design for easily slide in and out 9. Compatible with handlebar of 31.8mm and 35mm diameter
The TNS-4 makes it quick and easy to install star-fangled nuts used with 1" and 1-1/8" threadless headset systems
The strongest K-EDGE Mount yet for today's heaviest computers, cameras and lights. Upgrade to the Max for a solid and clean platform for your cycling electronics. Chosen by the best, year after year when quality, performance and craftsmanship matter. K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY and break away in a crash to protect the computer body. Compatibility: Most Garmin Edge, Forerunner, and Touring models, including 830, 820, 530, 520, 510, 500, 130, 25, 20 (Edge 1030 and Edge 1000 fits on the longer XL mount) Combo (GoPro style light/camera interface) adapter compatible (K13-580-BLK sold separately) Payload Capacity: Top: 96g (example: Garmin 830); Bottom: 242g on K-EDGE K13-580 Combo adapter (example: NiteRider 1800 or Cycliq FLY12)
LR500 Front Light Featuring the new curved lens optical design, LR500S gives out even-distributed flood light and provides side visibility, great for road cycling and daily commuting. Featuring battery run time extension function, the light could be also used for long-distance bike travel or race. Specifically designed curved lens With special optical modelling and design, the curved lens creates an even-distributed flood light with a suitable beam throw and provides side visibility, great for road cycling and commuting. Plus, you can extend the runtime of the battery by connecting with an external power source for emergency lighting when the light is in low power, no worry to be left in darkness. Multiple Output Settings Three constant brightness levels with high lumens or long run time for different riding environments; a visible rapid flashing for daytime riding to increase your visibility Features: 1. Specifically designed curved lens with even-distributed flood beam and side visibility, great for road cycling and commuting 2. Extending battery runtime by connecting with external power source 3. Wired remote button(sold separately) to change brightness level safely without releasing the grip 4. Multiple brightness levels and daytime visible rapid flashing for night and daytime riding 5. Micro USB charging port, compatible with most phone chargers 6. Integrated self-contained design, compact and light weight 7. Intelligent memory circuit remembers the last used brightness level and mode when turned on again 8. Quick release design for easily slide in and out 9. Compatible with handlebar of 22.2mm to 35mm diameter Specifications: LED: 1*CREE XP-G2 with a lifespan of 50000 hours Battery: 2200mAh/3.7V rechargeable Lithium-ion battery Dimensions (Headlight): 85mm (L)*36mm (W)*30mm (H) Weight (Headlight): 119g Materials: The main body is made by aluminium with Mil Type III Hard Coat Anodizing; the rear part and the handlebar mount are made by durable plastic Design and specifications are subject to change without notice. TR20 Rear Light The Ravemen TR20 USB Rechargeable Rear Light is a super bright, compact and lightweight rear light with a quick-release clamp mount as is suited to daily commuting, road and urban cycling. With only 20 grams of the whole unit and max 20 LED lumens, TR20 is a super-compact, lightweight yet bright rear light. With the quick-release clamp mount, the light is easy to use and convenient for your daily commuting or road cycling, whether mounted on the seatpost or helmet. Rear and Side Visibility Specifically designed lens ensuring your rear and side visibility for maximum safety. Plus, it has a versatile and easy-to-use quick-release mounting clamp system, so it's ready for various mounting situations. Also, you can adjust its angle for the greatest visibility and with USB rechargeability, it can be charged from your computer and is compatible with most phone chargers. Features: 1. Highly efficient COB LED with max 20 LED lumens 2. Quick-release designed for various needs 3. Specifically designed lens providing rear and side visibility 4. Auto power save and indicator for low battery 5. Micro USB charging port, compatible with most phone chargers 6. Built-in battery indicator and charging indicator 7. Intelligent memory circuit remembers the last used brightness level and mode when turned on again Specifications: Dimensions (Headlight): 18mm (L)*22mm (W)*52mm (H) Mount size: compatible with 24-36mm seatpost diameters LED: COB LED Battery: 200mAh/3.7V rechargeable Li-polymer battery Weight (light unit): 15g
The Tubeless Air Tank Inflator features a bypass air channel system that allows air to inflate the tyre directly from the floor pump with no inflation pressure loss. It is also compatible with Schrader, Presta and Dunlop valves and has an auto/manual condensed water bleeder valve that is incorporated into its safety valve system.
An all conditions wet lube and the first of the Green Oil range. Developed after Simon Nash the founder fo Green Oil went through the river Quaggy and wanted a green lube. Unlike petrochemical alternatives, Green Oil chain lube doesn’t contain PTFE (aka Teflon) or any petrochemicals to pollute your workshop, your skin, or any waterways you might ride through! Green Oil now contains N-Toc, and additive for even longer performance on the chain.