Let’s face it, climbing mountains and catapulting yourself back downhill is the eighth wonder of the world. In order to dominate the beaten path you need the perfect form of safety, and that’s where the D3 Fiberlite comes in. The ultimate offroad warrior, Troy Lee Designs have incorporated the best features of their D3 Carbon and Composite designs to create a hybrid worthy of any mountain bike aficionado. Extremely lightweight, it offers high-end protection to your head without breaking the bank. For the comfort enthusiast amongst you this helmet really does set the tone. It is well ventilated thanks to its 20 high-flow intake ports and six exhausts that maximise the flow of air around the head. Wind-tunnel tested, it has already proved its aerodynamic ability and the efficient ventilation system works hand-in-hand with the ports to help you avoid sweat. Keeping you focused as you line up the mother of all kickers, the D3 Fiberlite has been crafted from a lightweight fibreglass shell, the lid weighs in at just 1225g and provides a luxurious fitting thanks to the specially-sized 3D cheek pads. Allowing for the padded interior liner to be removed should you wish to wash it and freshen up, the D3 is one of the comfiest forms of protection on the market. Raise The Standards Working night and day to make the D3 race-ready, Troy Lee Designs have certainly raised the bar when it comes to their latest creation. If the unthinkable should happen and you suffer a fall, the pads can be removed with a lever to provide an easy exit from the helmet. If the comfort and protection levels weren’t enough, there is race-style graphics to ensure you standout from the crowd while there is also a drawstring helmet sock to keep your new pride and joy safe should you for some reason not be out shredding. Bragging a reputation as ‘The most decorated helmet in professional racing’, the D3 Fiberlite is no doubt one of the finest forms of protection you can partner with during your offroad session.
With its Polartec® Alpha insulation, created for the demands of high-intensity exercise, the Defend Fire Alpha Jacket is all about keeping your temperature regulated. Despite its low bulk and low weight, it does a brilliant job of holding onto body heat. However, it’s also superb at preventing overheating and sweat build-up, allowing excess heat to escape as your effort levels rise and fall with the terrain. The result is greater comfort on the bike. The Defend Fire is also made to be tough. The outer is made from a durable stretch Cordura® material, more than a match for the demands of mountain biking. The stretch fit and MTB-specific cut also ensure you’re never held back from throwing your bike around the trails. And then there’s the DWR (Durable Water Repellent) treatment, shrugging off mud and water kicked up off damp trails.
Made from durable neoprene with an SCS (Super Composite Skin) #39 surface coating, the Sailfish Ignite Wetsuit offers optimal levels of buoyancy, holding you at the ideal swimming position while keeping drag to a minimum for speedy and efficient performance in the water. The Ergo fit design and flat collar construction sits snuggly against your body and comfortably around your neck while creating a hydrodynamic silhouette. A low resistance panel further increases swimming efficiently and a flexible Soft Stretch inner enhances comfort and reduces shoulder and arm fatigue so you can swim for longer and make the most of your stroke.
Lens POC’s Crave Sunglasses come with a single lens design that creates an uninterrupted, expanded vision. The lens has been designed by Carl Zeiss Vision who are the powerhouse lorded for their world renown for optical advancement. The Black Uranium, Crave glasses come with a light transmission of 13.3% which is most suited for bright lighting conditions. To keep the lens clearer for longer the lens comes with a Ripel lens treatment which helps all forms of moisture pearl from the lens including mud, rain, road spray and more. Frame The frame comes with a Grilamid construction which is a material characterised for being incredibly lightweight and flexible for long lasting comfort whilst also being incredibly durable and resistant. For extra stabilisation the glasses come with hydrophilic rubber stays which are water resistant and will ensure that the glasses stay in position on your face even when you’re at your most active. Frame Dimensions Height: 54mm Width: 147,73mm Temple Length (from hinge): 115mm
The Black Diamond Distance Carbon FLZ Poles boast a premium design that offers a fully adjustable, folding performance. These highly adaptable trekking poles deliver a 100% carbon construction, alongside FlickLock® Pro adjustability and a three-section foldable shaft. The lightweight and supportive Distance strap is also breathable and moisture wicking, and the ultralight EVA grip has just the right amount of comfort and non-scarring rubber Tech Tips.
Low on complexity, but rich with features, this front derailleur is equipped with SRAM's renowned AXS wireless technology that allows for easy personalisation and control on your road bike. Thanks to its eTap shift logic, it delivers intuitive shifting, easy setup and reliability that has been proven at the highest levels. AXS technology means personalisation is in your hands. X-Range Optimised and Yaw Technology Due to today's drop bar bikes being faster and more capable than ever before, riders want a shifting set-up with wide-range gearing to match their wide range of cycling pursuits. But, as the range is only half of the equation, they also want a drivetrain that offers the right gear for any situation. This front derailleur is optimised for use with X-Range chainrings, so riders can enjoy fewer, faster front shifts, which makes it easier for you to find the right gear and offers a distinct performance advantage in comparison to traditional drivetrains. SRAM has also equipped this model with Yaw technology, where the front derailleur cage rotates to maintain a consistent angular relationship with your chain while eliminating the need for shifter trim. As a result, shifts feel more direct and precise, delivering an unmatched performance advantage in front shifting. SRAM AXS Enabled Road Bike Front Derailleur The precision and reliability of eTap AXS, now at a whole new level. The Rival eTap AXS front derailleur is optimised for X-Range chainrings and uses Yaw technology so there’s no need for trim. Never miss a shift. - Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability - AXS enabled for easy personalisation - Crisp and accurate front shifts - SRAM Yaw trimless cage technology optimised for use with 46/33 or 48/35 X-Range chainrings - Designed for standard chainline eTap AXS cranks Please note: A battery and charger are available to purchase separately for this product. Technologies: AXS Enabled: AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. Control: AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Personalise: Wireless controls open the door to new levels of customisation. With AXS, you can personalise your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. Measure: The AXP Mobile App and AXS Web allow you to monitor your bike’s performance and readiness. It’s an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyses your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments. Yaw: With a front derailleur cage that rotates to maintain a consistent angular relationship with the chain, Yaw technology eliminates the need for shifter trim. As a result, shifts feel more direct and precise, delivering an unmatched performance advantage in front shifting.
Stay protected whenever you take to the outdoors in the Columbia Peak Creek Shell Waterproof Jacket. Made with 100% recycled Polyester, it is lightweight, durable, and a great sustainable alternative, and features waterproof and breathable fully seam-sealed 3L Omni-Tech™ technology for optimum elemental protection. Coated zippers alongside an adjustable hood, bonded hood brim, and adjustable cuffs and hem, will also keep every ounce of the cold or harsh weather out so you remain dry. Plus, for optimum versatilty should you up the pace, underarm venting is perfectly positioned to provide airflow to where it is needed most. Finished with four zipped pockets that are ideal for keeping valuables safe and secure and within easy reach.
The S9 platform of cycling shorts have proved themselves to be at the cutting edge of cycling comfort and performance for even the most demanding of riders. And these EQUIPE RS Summer Bib Shorts S9 Werksteam continue to offer the very same incredible muscles support and flexibility as you dance on the pedals. Unrivalled stability always keeps the seat pads in the right place too. And they’re finished with stealthy Assos Werksteam graphics. A-Lock Engineering A-Lock engineering is all about creating shorts with incredible stability and a seat insert that is always perfectly positioned. The start of this system is a new fabric, Type.441 textile. This is a fabric which has exceptional compression qualities and with its silk feel is incredibly comfortable against the skin. Not only that it's quick-wicking, anti-odour and durable, the perfect fabric for performance cycling. Float like a Butterfly The next part of the above A-Lock engineering system is a significant advance in the panel and construction design. While the class-leading S7 shorts used a four-panel construction, the S9 uses just two. The result of using just the two panels is a reduction in seams leading to less weight and even more comfort. The two panels are then engineered into Assos' unique 'butterfly' panel design, snugly wrapping the legs and back to create a brand new ergoBox structure. This holds the insert securely in place for an incredible feeling of support and comfort no matter how intense your efforts. rollBar Bib Design The rollBar bib strap system provides unrivalled support of the lower section of the shorts. It acts just like an anti-sway bar in a car, the straps stabilising and securing the seat insert in place as you move. The straps are attached across the same seam as the insert, maintaining the perfect degree of tension as you transfer weight in and out of the saddle. The bib straps themselves are a combination of highly elastic materials and a single piece in the back forming an A-frame which supports the shorts perfectly. In the front, the straps are made of a more flexible material, with an antibacterial carbon weave, to wick moisture and lay flat - the result is extremely lightweight straps you will barely notice. S9 RS Equipe Seat Pad The RS Equipe Seat Pad delivers the comfort you need to concentrate on your performance. A super-soft antibacterial microfibre offers a luxurious feel against the skin while kraterCooler holes ensure excellent ventilation, preventing sweat build-up and promoting freshness. A combination of 3D three-layer perforated waffle foam and superAir microShock memory foam core work together to give support to your sit bones and quick adaption to your body position whenever you shift weight or move in and out of the saddle.
When heading out on the trails, the weather isn't always working in your favour and to combat this, Scarpa have created the Women's Cyrus Mid GTX Boots with a 2mm water resistant nubuck upper with Gore-Tex lining, sealing the feet away from unwanted external moisture while allowing the feet to breathe internally. A higher ankle cuff provides additional support by keeping the feet in position on uneven terrains and a midsole sits underneath the feet, offering complete comfort.
Whether you're into XC racing or tackling your favourite local MTB trails with your riding buddies, this hydraulic disc brake is engineered for smooth and consistent performance. It comes equipped with a Small Finger Lever (SFL) and a two-piston caliper for an excellent combination of adjustability, braking feel and reliability as you hit the trails. Benefitting from a wide range of Hayes technologies, it ensures powerful and dependable braking actuation, wherever your next adventure takes you. Race Ready MTB Disc Brake with Small Finger Lever (SFL) Expanding on the brand's award-winning Dominion A4. The, Dominion A2, targets Cross Country and Trail riders. Dominion A2 features a two-piston caliper. Dominion A2 includes all the performance from the Dominion A4, utilising a compact, two-piston caliper. With the SFL option (this version), the Dominion is the ideal brake option for any rider with smaller hands. Hayes product development team set out to design a brake system specifically designed for a smaller ergonomic profile. QuickBite System Dominion SFL maintains all the power and feel of the proven Dominion A4, and accomplishes this using a specifically designed smaller and narrower brake lever. Dominion A2 features the proprietary QuickBite system for fast and consistent braking performance and it is compatible Hayes D-Series rotors to manage the heat with less braking noise (rotors are available separately). Additional Item Top Features: - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment Technologies: Low Input - High Fidelity (LoFi): Low effort system with predictable, progressive ramp-up and a crisp bite point. Reduced Friction: A featherlight lever feel is achieved through a combination of an added glide ring on the piston and sealed ball bearings at the lever blade pivot. SRL: The Stable Rate Link delivers a consistent lever ratio regardless of reach. Precise Engagement: Each Dominion is factory set to have the lowest dead stroke possible and a crisp bite point. Built to Last: Metal pistons are used to ensure that no matter the terrain or temperature your brake will continue to perform as it did on the first ride. Adjustable Reach: Adjust your lever reach with ease while on the trail thanks to an intuitive adjustment knob design. Modal Resonance Cancellation (MRC): FEA-optimised modal shapes of D-Series rotors are intentionally designed to oppose those of Semi-Met T106 and Sintered T100 pads, canceling out noise and vibration. Rotors available separately. Crosshair Alignment System: Patented alignment screws allow for quick and accurate setup. King Pin: Pad retention bolt adds strength. 2-Stroke Dual Port Bleed System: Dual port bleed port system for maximum bleed integrity. Small Finger Lever (SFL): Ergonomically tailored for the smaller hand. Manufacturer's Part Numbers: 95-36115-K153 Black/Grey Front 95-36115-K154 Black/Grey Rear
Combining an aluminium and steel build, this brake/shift lever set is robust and durable for handling all of the intensity that's associated with long days on your bike. Whether you're clocking up the miles on your gravel ride or exploring the off-road with your riding buddies, this model is a perfect companion for consistent, smooth and reliable operation. microSHIFT has also ensured that the shifter paddles are separate from the brake lever to avoid accidental braking. As a result, this dual control lever set makes it easier than ever to control your ride. These unique drop bar shifters are directly compatible with Shimano Dynasys 11 speed MTB rear derailleurs, meaning you can pair a wide range cassette and a drop bar cockpit with no compromises. microSHIFT XLE Series With an array of compatible shifter and derailleur options, XLE is a tinkerer’s dream. Whether you’re putting drop bars on a mountain bike or a cassette on your gravel bike, XLE has you covered. Technologies: - External cable routing. - Left side brake only for 1×11 setups. - Shifter paddles are separate from brake lever to avoid accidental braking. - Hardened steel internals for precise, positive shifting. - Replaceable hoods. Manufacturer's Part Number: SB-M110 Black Pair
Measuring a 38mm profile and 27.5mm width, this wide, aero rim is superbly streamlined for a speedy soar over a variety of under-wheel conditions. Tubeless-ready to meet the expectations of the modern all-rounder rider, it is equipped with 20 (front) and 24 (rear) spoke holes, giving way to a sturdy reinforcement when fully built. Stiff, responsive and lightweight from its carbon build, the BlackEdition 38 Carbon Road Rim is the ideal pick for riders after a rim for any situation.
Why let wet weather keep you from your mountain biking fun? The Defend 3L Trousers are made with a 3-layer waterproof fabric, are fully seam-sealed and feature a rain-shedding DWR (Durable Water Repellent) finish too. Together they provide a reliable barrier against falling rain and the inevitable mud flicked off from muddy trails. While protecting against the rain, the Defend 3Ls are also built tough. Abrasion-resistant Cordura® is used in key areas to add durability and protection. The MTB-specific fit also makes room for knee guards, perfect for padding up when hitting more technical trails and for more rowdy riding. And when you’re riding hard, enjoying the testing conditions, the excellent breathability of the pants prevents you from getting a soaking from your own sweat on the inside. In wet weather, you’ll be staying dry inside and out.
Ride fast and enjoy total and confident control with the Gravita Tensor Clip MTB Shoes. Fizik's engineers have created a shoe that offers that perfect balance of protection, durability and a precise fit that is sorely lacking in many downhill and enduro MTB shoes. X6 Outsole. Clip in and Stay in Control. The heart of the Tensor Clip shoe is the X6 Outsole. It's this that keeps you confidently on the pedals and is crucial for reacting quickly, aggressively and nimbly to changing terrain and trail features. For the clipped version of the Gravita Tensor, Fizik has utilised a Vibram XS EVO tread compound. This isn't quite as sticky as that found on the flat-pedal shoe but makes for a smoother engagement and disengagement from clip-in pedals. The rubber compound is formed into a zonal lug pattern. Low profile mid-foot tread offers an optimal mechanical interface with pedal bodies, keeping you planted even if you don't immediately find your clip in point. Meanwhile, the heel and toes feature a deeper tread for greater traction when hiking back up the hill. Flex is also tuned for the clip-in rider. The stiffness gets a boost, rated 5 out of 10 on the Fizik stiffness scale, optimising power transfer and improving pedalling efficiency. Precision Fit Downhill and enduro racing is all about shorter more intense efforts. Sprinting from the start gate, pushing hard into berms and lung-busting racing to the finish line. And it's the precise fit of the Gravita Tensor that supports your foot during those efforts. No power wasted. The ergonomically designed lace pattern creates an even tension across the foot and makes for easy adjustment to how you like your shoes to feel. Stability is also enhanced via Fizik's Powerstrap. Sitting over the instep, it stabilises the plantar arch and locks your heel in place. It also doubles as a lace lock. Durable and Protective While rowdy mountain bike riding demands a tough shoe, Fizik didn't want to add unnecessary bulk or weight to the Tensor. The solution was to use a slim silhouette and utilise rip-stop fabrics that are very tough and yet remarkably light in weight. The rip-stop upper is also complemented by an injection-moulded TPU armoured toe-box to ward off rocks and roots - just what you need when you're foot out and flat out. Laminated scuff-guards also protect in high wear areas. Lastly, when riding aggressively you're constantly moving and it's easy to hit your ankle to cranks and swingarms. Here the raised inner ankle pad takes the sting out of those impacts, while not affecting your ankle mobility. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
Why let wet weather keep you from your mountain biking fun? The Women's Defend 3L Water Pants are made with a 3-layer waterproof fabric, are fully seam-sealed and feature a rain-shedding DWR (Durable Water Repellent) finish too. Together they provide a reliable barrier against falling rain and the inevitable mud flicked off from muddy trails. While protecting against the rain, the Women’s Defend 3Ls are also built tough. Abrasion-resistant Cordura® is used in key areas to add durability and protection. The MTB-specific fit also makes room for knee guards, perfect for padding up when hitting more technical trails and for more rowdy riding. And when you’re riding hard, enjoying the testing conditions, the excellent breathability of the pants prevents you from getting a soaking from your own sweat inside. In wet weather, you’ll be staying dry inside and out.
The EVOC Trail Pro 10 Backpack boasts a super-light and high-end performing yet compact design. Made with a Liteshield Plus back protector, it is extremely light, flexible and non-temperature-sensitive, as well as offering superior impact resistance and energy absorption. Extra wide hip wings and an Airo Flex hip-belt also provide an optimum fit alongside an equal load transfer to the hips, with simultaneous maximum ventilation - for utmost carrying comfort. Plus, an integrated Brace Link enables shoulder straps to be adjusted to your individual shoulder width, and a handy backlight clip helps with visibility when you are adventuring in low-lit environments. To finish, the compartmentalised pack features a helmet transport flap, and designated tool and hydration system compartments for all your essentials.
Lumina OLED 1200 Boost The front light included in this set comes with the new NiteRider OLED screen that puts you fully in the driver’s seat – you can easily change between light modes and see your battery life in each changing mode. Easily switch between the nine different light modes including the ‘Boost’ mode which provides the ultimate in light perfect for extreme terrains when lighting conditions are at their darkest. The Lumina is USB rechargeable and comes with an integrated, quick-release bracket that will work with most handlebars types. Light Modes Mode One: 275 lumens – 6 hours Mode Two: 550 lumens – 3 hours Mode Three: 75 lumens – 18 hours Mode Four (Boost): 1200 lumens – 1 hours Mode Five (Flashing): 6.30 hours Mode Six (Flashing): 10 hours Mode Seven (Flashing): 18 hours Mode Eight (Flashing): 18 hours In the Box LED light head with OLED display Internal lithium-ion battery Handlebar clamp mounts (fits up to 35mm) USB charging cable Solas 250 The rear light in this set comes with 250 lumens of bright light output with a wide spreading beam that will keep you seen from multiple angles. The light also comes with a range of light outputs which can easily be toggled between by holding down on the power button. The modes include both flashing and constant as well as a ‘Group Ride’ mode that ensures you stay visible without blinding or distracting fellow riders. The rear light is also USB rechargeable for quick and easy charging on the go. Light Modes Mode One (Flashing): 6.30 hours Mode Two (Flashing): 4.30 hours Mode Three: 7.30 hours Mode Four (Group Ride): 40 hours In the Box LED tail light Seatpost mount USB cable
On the top of the Brooks England Brick Lane Pannier Bag features a crossed elastic to fasten additional objects to carry during urban transit. The Brick Lane roll up panniers attach to most racks with a width between 10 and 15 cm. Dimensions: 34 (W) x 36 (H) x 10 (D) cm
When heading out on the trails, the weather isn't always working in your favour and to combat this, Scarpa have created the Cyrus Mid GTX Boots with a 2mm water resistant nubuck upper with Gore-Tex lining, sealing the feet away from unwanted external moisture while allowing the feet to breathe internally. A higher ankle cuff provides additional support by keeping the feet in position on uneven terrains and a midsole sits underneath the feet, offering complete comfort.
Launched to celebrate the Crankbrothers 25th anniversary, these limited-edition Mallet Boa MTB Clipless Cycling Shoes combine the same innovative design features as the original, alongside a unique splatter pattern, contrast gum sole, and silver accents. Still overflowing with features to make your mountain biking experience more comfortable and more assured, the Mallet Boa MTB Clipless Cycling Shoes benefit from the same attention to detail that Crankbrothers apply to their pedals. The clever Match System optimises cleat engagement for any MTB clip-in system, keeping you confidently in control when flying over technical terrain. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal System Crankbrothers have carefully engineered their unique Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer. Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Twist and Go Making adjustment super-quick and super-easy, the BOA® Fit System lets you dial in the fit of your shoes just right every time. A simple twist of the dial offers micrometric adjustment, so your shoes are never too tight and never too loose. Plus, it's easy to adjust on-the-fly and it's light too. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.