Dan Paley likes to get rude (aka grind) on all available surfaces without causing enough rudeness (aka noise and/or damage) to upset the neighbours. His new signature Rude Tube pegs have a durable plastic sleeve with a heat treated and butted chromo inner peg for maximum strength. Please note: The BSD Rude Tube Peg is sold individually. ###section### Product Specs LENGTH: 4.2" (106.6mm) DIAMETER: 37mm MATERIAL: Plastic AXLE SIZE: 10mm / 14mm PACK SIZE: 1 (Single) WEIGHT: 170g (6oz)
The OG Dan Paley signature peg with a durable plastic outer sleeve. Heat treated, butted chromo inner peg. New XL 4.5" x 1.46" diameter. Please note: The BSD Rude Tube LT XL Peg is sold individually. ###section### Product Specs LENGTH: 4.5" (114mm) DIAMETER: 37mm MATERIAL: Plastic AXLE SIZE: 10mm PACK SIZE: 1 (Single) WEIGHT: 170g (6oz)
The Omega Elbow pad uses a light weight breathable Lycra and “Dry Fit” mesh back section with an internal soft air plush lining to keep the pad well ventilated, and compression Lycra with Kenesio™ bands and multiple Sharkskin neoprene grippers to keep the pad firmly in place without the needs for straps. To protect your elbow from impact. Fuse use a brand new 30% lighter SAS-TEC insert to give you ultimate levels of protection without sacrificing maneuverability.
The Echo elbow pad uses a perforated neoprene with Cordura and Duratex outer layer with an air plush lining for comfort. To protect your elbows from impact we use SAS-TEC, soft and flexible Visoelastic foam for superior comfort but also extreme impact absorption. This year we also added Sharkskin neoprene gripper to keep the pad firmly in position. Features Breathable perforated Duratex neoprene with air plush lining, back side with dual layer soft Lycra.
Pair of Echo knee pads from Fuse. Constructed from a super tough Cordura face fabric, with an air plush lining for supreme comfort. The back side of the pad uses a dual layer Lycra design, that is soft on the inside but strong and durable on the outside.To protect your knees from impact we use SAS-TEC, soft and flexible Visoelastic foam for superior comfort but also extreme impact absorption. A Sharkskin neoprene inner section and dual strap design ensure the pad stays firmly in place. Features Breathable perforated Duratex neoprene with air plush lining, back side with dual layer soft Lycra.
The Delta elbow pad uses a perforated Duratex neoprene with air plush lining for the front section while the back side uses a dual layer Lycra for superior comfort. To protect your elbows from impact we use our DFS foam under a polyamide soft cap. This year we also added Sharkskin neoprene gripper to keep the pad firmly in place. The Delta series pads also features upper and lower straps for a perfect fit.
Replacement Plastic outer for BSD Jersey Barrier Hub Guards. Version 1 : Fits Odyssey, WTP, Shadow, Sputnic, Macneil cassette hubs etc. Version 2: Fits Primo Mix cassette Hub. Version 3: Fits Profile and Madera cassette hubs. Ratchet Version: Fits G-sport Ratchet hub. Marmost version: Fits G-sport Marmoset front hub. Vandero 2 Version: Fits Odyssey Vandero 2 front hubs. BSD Front Version: Fits BSD front hubs. BSD Rear Version: Fits BSD rear hubs.
Budget cranks from Stranger. The Level cranks are the same cranks that come on some of Strangers complete bikes and come with Primo bottom bracket. RHD only. ###section### Product Specs Crank Type:3pc Spindle Diameter:19mm Includes BB:Yes Weight:TBC ###shogun-image-section###
High quality sealed bearing mid BB kit as part of United's S-Line range. Comes with spare washers, cone spacers and tube spacer - all you need basically. Available in 19mm or 22mm sizes.
Mid BB kit from BSD. The Kit includes 2 Sealed bearings, CNCd spacers, tube spacer, sprocket bolt and spacers.
The Rant Bang Ur BB kit includes 2 precision R12 sealed bearings, 2 CNC machined 6061 aluminum cone spacers for a clean look, an aluminum internal spacer, 4 steel crank arm spacers for dialing in your chain alignment.
Hand built right here at Sourcebmx. One of the highest spec custom wheels we offer this wheel uses the Profile tried and tested Mini Cassette hub laced into the super strong Cinema 888 rim. This wheel is laced together using high quality straight gauge stainless spokes. ###section### Product Specs WHEEL SIZE:20" HUB:Profile Mini Cassette AXLE:14mm Male DRIVE SIDE:Right Side Drive RIM:Cinema 888 SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1270g / 2.79lbs
Ultra-thin wall chromoly tubular arms that offer superior stiffness for smaller racers. Each chromoly Mini Crankarm weighs less than a solid aluminium arm of equal length. Titanium Gun Drilled Hollow (GDH) axle with chromo GDH axle bolts. Titanium GDH axle bolt upgrade available. Ti Sprocket Bolt is INCLUDED. ###section### Product Specs Type:3 pc Spindle Diameter:19mm Includes BB Bearings:No Weight:18.41 oz - 19.15 oz ###shogun-image-section###
100% took design cues from their own championship winning Aircraft Helmet to create the Status, offering elevated performance and comfort without breaking the bank. Redifining the standards for what a mid-level full face helmet should be, the Status boasts an ultralight design that utilises fibreglass for maximum strength while keeping the weight right down. An active cooling system maximises airflow to provide maximum ventilation, this feature works while riding and while you're stationary. The Status's comfort liner, cheek pads and chin strap covers are all removable and washable. The Status also features a padded PU chinbar interior that adds essential impact protection and an adjustable visor with lightweight screws. It is also compatible with inflatable emergency helmet release systems. Sizing: Small: 55-56cm (Cheek pad - 30mm, Liner 12mm) Medium: 57-58cm (Cheek pad - 25mm, Liner 10mm) Large: 59-60cm (Cheek pad - 32mm, Liner 12mm) X-Large: 61-62cm (Cheek pad - 30mm, Liner 10mm)
100% took design cues from their own championship winning Aircraft Helmet to create the Status, offering elevated performance and comfort without breaking the bank. Redifining the standards for what a mid-level full face helmet should be, the Status boasts an ultralight design that utilises fibreglass for maximum strength while keeping the weight right down. An active cooling system maximises airflow to provide maximum ventilation, this feature works while riding and while you're stationary. The Status's comfort liner, cheek pads and chin strap covers are all removable and washable. The Status also features a padded PU chinbar interior that adds essential impact protection and an adjustable visor with lightweight screws. It is also compatible with inflatable emergency helmet release systems. Sizing: Small: 55-56cm (Cheek pad - 30mm, Liner 12mm) Medium: 57-58cm (Cheek pad - 25mm, Liner 10mm) Large: 59-60cm (Cheek pad - 32mm, Liner 12mm) X-Large: 61-62cm (Cheek pad - 30mm, Liner 10mm)
The Cinema Aspect headset is a high quality and super versatile headset. The stackable cap design can be configured in several different ways, ranging from a totally slammed 4mm cap height, up to a full height 27mm cap, with a clean and contoured look. Whether you like to cut your fork down as short as possible, or not cut them at all, this headset has you covered. Featuring two precision sealed campy spec integrated bearings, the Aspect headset provides smooth long lasting bearing life.
Sunday's Model-C created the standard for 24" BMX and now with the 2023 comes a 100% chromoly frame upgrade. It boasts a proven, 20" inspired geometry that allows the Model-C to be ridden with a greater sense of control at full speed. Bigger riders will immediately notice this advantage. To make the Model-C feel as pro-level as possible Sunday have utilised a whole host of Odyssey parts, from the Stage 1 Rims, Pursuit OEM Tyres to the Odyssey Monogram Seat and Springfield U-brake system. ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 24" TOP TUBE LENGTH: 22" CHAIN STAY LENGTH: 14.6" - 14.85" HEADTUBE ANGLE: 74.5° SEAT TUBE ANGLE: 71° FORKS: Sunday Model-C, 24" fork w/2-piece chromoly steerer tube and welded pre-load BARS: Sunday 24 XL OEM, 2-piece STEM: Sunday Freeze top load, 48mm HEADSET: FSA integrated conical, 1-1/8" BRAKE MOUNTS: BRAKES: Odyssey Springfield U-brake FRONT HUB: Sunday, 36H, low-flange, sealed, 3/8" axle FRONT RIM: Odyssey Stage 1, 24", 36H REAR HUB: Sunday, 36H, sealed, 14mm axle w/10T driver REAR RIM: Odyssey Stage 1, 24", 36H TYRES: Odyssey Pursuit OEM, 24" x 2.2" (Front & Rear) SPROCKET: Sunday Sabretooth V2, 25T, steel CRANKS: 175mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Odyssey Twisted PC Pro SEAT: Odyssey Monogram, Pivotal GEARING: 25/10 WEIGHT: 29.1lbs ###section### Product Highlights High-quality Chromoly construction Fitted with high-quality aftermarket components Great for cruising ###shogun-image-section###
The Sunday Primer 18" is the next step for younger riders on their journey from a 16" to a full size 20" bike. It's important that younger riders have access to not only an affordable and durable bike but one that lets them keep on progressing without being restricted. Its shorter chain stay, lighter wheels and size-specific, pro-style frame geometry make the Primer 18 the go-to for serious BMXers in this size range. Not forgetting the quality parts used on this bike to make it more reliable, the Odyssey Springfield Brake, Sunday Cornerstone Grips and a fully sealed cassette hub to name a few. ###section### Product Specs FRAME MATERIAL: WHEEL SIZE: 18" TOP TUBE LENGTH: 18.5" CHAIN STAY LENGTH: 11.7" - 12" HEADTUBE ANGLE: 74.5° SEAT TUBE ANGLE: 71° FORKS: Sunday Primer, 18" fork w/2-piece steerer tube and welded pre-load BARS: Sunday, 2-piece STEM: Sunday Freeze front load, 48mm HEADSET: FSA integrated, 1-1/8" BRAKE MOUNTS: BRAKES: Odyssey Springfield U-brake FRONT HUB: Sunday, 28H, low-flange, loose-ball, 3/8" axle FRONT RIM: P-7X aluminium, 18", 28H REAR HUB: Sunday, 28H, sealed, 14mm axle w/9T driver REAR RIM: P-7X aluminium, 18", 28H TYRES: Sunday Current, 18" x 2.2" (Front & Rear) SPROCKET: Sunday Sabretooth V2, 25T, steel CRANKS: 140mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Wellgo platform, plastic SEAT: Sunday Badge, seat and post combo GEARING: 25/9 WEIGHT: 23.3lbs ###section### Product Highlights Designed for the younger riders, the perfect first bike or upgrade for those growing rippers Traditional BMX Geometry Geometry designed with the smaller rider in mind Upgradable with aftermarket parts ###shogun-image-section###
Sunday's Primer 16" has been improved and now better than ever! It's perfect for younger riders with it's scaled down size and unique geometry. The Primer rides like a pro-level bike that's been scaled down to meet the needs of smaller riders, utilising SUnday's unique geometry to help them quickly adapt to bigger bikes as they grow. Quality parts like Odyssey's Springfield Brake and a fully sealed cassette hub make the Primer reliable so you can count on it every time. ###section### Product Specs FRAME MATERIAL: WHEEL SIZE: 16" TOP TUBE LENGTH: 16.5" CHAIN STAY LENGTH: 10.6" - 10.85" HEADTUBE ANGLE: 74.5° SEAT TUBE ANGLE: 71° FORKS: Sunday Primer, 16.5" top tube, integrated 1-1/8" head tube BARS: Sunday, 2-piece STEM: Top load, aluminium, 40mm HEADSET: FSA integrated, 40mm BRAKE MOUNTS: BRAKES: Odyssey Springfield U-brake FRONT HUB: Sunday, 20H, low-flange, loose-ball, 3/8" axle FRONT RIM: P-7X aluminium, 16", 20H REAR HUB: Sunday, 20H, sealed, 14mm axle w/10T driver REAR RIM: P-7X aluminium, 16", 20H TYRES: Sunday Current, 16" x 2.1" (Front & Rear) SPROCKET: Sunday Sabretooth V2, 25T, steel CRANKS: 127mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Wellgo Junior platform, plastic SEAT: Sunday Badge, seat and post combo GEARING: 25/10 WEIGHT: 23.3lbs ###section### Product Highlights 5-8 Years old Specifically designed for the smaller rider, just starting out in BMX Traditional BMX Geometry Geometry designed with the smaller rider in mind Responsive brakes ###shogun-image-section###
Sunday's High-C was built to handle everything, whether its cruising all day, jumping curbcuts or just wheelie-ing around, the High-C can do it all. It features a unique shortened rear-end geometry compared to most similar sized bikes allowing for better and easier handling in tough positions. 100% chromoly frame, forks and bars ensure the High-C is built to last. It's also equipped with a quick release seat clamp to make changing up your riding style a breeze. The High-C is spec'd out with some dialled parts from Odyssey, Maxxis and FSA. Bottle cage mounts on the frame make it so you've always got a beverage with you on your next adventure. ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 29" TOP TUBE LENGTH: 23.5" CHAIN STAY LENGTH: 17.5" - 17.75" HEADTUBE ANGLE: 71° SEAT TUBE ANGLE: 71° FORKS: Sunday High-C, 29", 100% chromoly fork w/ 1-piece steerer tube and welded pre-load BARS: Fairdale MX-6 Bars, 100% Chromoly, 2-piece STEM: Sunday Freeze top load, 48mm HEADSET: FSA integrated conical, 1-1/8" BRAKE MOUNTS: BRAKES: Aluminium V-brake FRONT HUB: Sunday, 36H, low-flange, sealed , 3/8" axle FRONT RIM: DP-24 aluminium, 29", 36H, double wall REAR HUB: Sunday, 36H, sealed, 3/8" axle w/Odyssey 13T freewheel REAR RIM: DP-24 aluminium, 29", 36H, double wall TYRES: Maxxis Torch, 29" x 2.1" (Front & Rear) SPROCKET: Sunday Sabretooth v2, 27T, 6061 aluminum CRANKS: 175mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Odyssey Twisted PC Pro SEAT: Sunday Tiger Camo, Railed GEARING: 27/13 WEIGHT: 29.1lbs ###section### Product Highlights Great for cruising Fitted with high-quality aftermarket components High-quality aftermarket tires ###shogun-image-section###