6Al4V Titanium 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. 9 and 10 tooth drivers are for 1/8 width chains. Drivers include bearings & seals. Pawls, springs, & cogs not included.
Description for Fit Caiden 16" BMX Bike 2023 Blue With White Fade not available
The 16” Bronco may be small, but it’s the perfect ride for big adventures. Built with a lightweight 6061 aluminum frame, this bike is perfect to zip around on. The training wheels, coaster brake, and hand brake will help to build confidence when going out on new adventures exploring the neighborhood. ###section### Product Specs FRAME MATERIAL: 6061 Aluminum WHEEL SIZE: 116" TOP TUBE LENGTH: 15.1" CHAIN STAY LENGTH: 11.5" HEADTUBE ANGLE: 72° SEAT TUBE ANGLE: 70° FORKS: Hi-Ten Tubular BARS: 20.5” x 6” STEM: TBC HEADSET: 1-1/8” Threadless BRAKE MOUNTS: Welded V-Brake BRAKES: Rear Alloy V-Brake w/ Coaster Brake FRONT HUB: TBC FRONT RIM: 28H Alloy Rim REAR HUB: 16T Coaster Brake REAR RIM: 28H Alloy Rim TYRES: 16” x 2.1” SPROCKET: 36T Sprocket CRANKS: One-piece Steel, 102mm BB: TBC PEDALS: Resin Platform SEAT: SE Racing GEARING: 36/16 WEIGHT: 21.7 lbs / 9.86kgs ###section### Product Highlights Smaller 16" Wheels - The Perfect fit for for 5-8 years olds (3ft - 3ft 6 / 90cm - 105cm) Specifically designed for the smaller rider, just starting out in BMX Lightweight aluminium build V-brake system on welded mounts Geometry designed with the smaller rider in mind ###shogun-image-section###
Pack of 50 Spokes including 16mm black brass nipples and powder coated finish. Weight: 300 g.
These spokes were chosen originally for the Dynamic’s wheel builds, the double butting enables them to be lighter than traditional plain gauge spokes but without sacrificing any strength.
Featuring a double-butted 14 gauge spoke (2.0/1.8/2.0mm) the Pro Spoke Kit is lighter AND stronger than traditional straight 14 gauge spokes. This is possible by using a spoke that is 14g at the ends but 15g in the middle; this combination makes for an exceptional strength to weight ratio. Additionally included is lightweight black anodised aluminium nipples to further reduce rotational weight.
Featuring a heavily double-butted 14 gauge spoke (2.0/1.5/2.0mm) the Expert Spoke Kit is lighter AND stronger than traditional straight 15 gauge spokes. This is possible by using a spoke that is 14g at the ends but slims down 17g in the middle; this combination makes for an exceptional strength to weight ratio. Additionally included is lightweight black anodised aluminium nipples to further reduce rotational weight.
Affordable straight gauge steel spokes. Includes 40 black spokes and 40 black brass nipples. Available in various lengths.
Stay Strong built their youth sized Combat Body Armour to offer exactly the same level of protection and comfort as their adult range. Stay Strong's Combat Body Armour is designed to keep you safe and protected all while feeling comfortable so you can focus on the race or the trails. Built with soft shell foam that provides protection against impacts and slams with mesh foam on the shoulders and underarm air holes allowing for airflow. Abrasive fabric features on the elbows and shoulders to add reinforcement to those high wear areas. The lycra body fits comfortably and features a side zip to get the Combat Body Armour on and off easily, with gel print silicon grips at the top and bottom of the body armour to keep it securely in place.
No matter how long you've been riding, you know the value of good protective gear and have probably discovered the hard way exactly why you need it! Stay Strong's Combat Body Armour is designed to keep you safe and protected all while feeling comfortable and unrestricted so you can focus on the track or the trails. Built with soft shell foam that provides protection against impacts and slams with mesh foam on the shoulders and underarm air holes allowing for airflow. Abrasive fabric features on the elbows and shoulders to add reinforcement to those high wear areas. The lycra body fits comfortably and features a side zip to get the Combat Body Armour on and off easily, with gel print silicon grips at the top and bottom of the body armour to keep it securely in place.
Any product that adds support and strength to your ankle is worth paying attention to in this sport and the Stay Strong Conflict Ankle Support does both of those things incredibly well! The Conflict Ankle Support uses a lace up style design that features plastic inserts to protect key areas around your ankle from impacts. To ensure that the ankle support isn't uncomfortable or stuffy, especially on those warmer days, the tongue is breathable to let hot air escape. Pull tabs at the front and back make it quick and easy to get the supports on and then an extra under-foot strap adds even more support to your ankle. The Stay Strong Conflict Ankle Supports are sold in pairs.
Your elbows are usually the first thing to make contact with the ground in most slams so get them wrapped up and protected with the Stay Strong Reactiv Elbow Guard. E3T foam throughout adds lightweight protection where it's needed most, the foam is lightweight and durable keeping the guard easy wearing for long periods of time and always offering the same level of protection. The lycra body paired with mesh backing makes sure the Reactiv Elbow Guard fits comfortably and allows air to flow through the mesh to keep you cool. Stay Strong have utilised gel print silicon grip on the inside of the top and bottom bands to keep the Reactiv Guard firmly in place.
The Stay Strong Reactiv Knee Pads are a durable, reliable and comfortable way to keep your knees protected whether you're on the track or the trails. Utilising lightweight E3T foam to protect your knees from slams and cushion impacts, with their lycra body and mesh backing ensuring they're comfortable, breathable and fit snug too. They feature a gel print silicon grip inside the top and bottom bands to help keep them in place throughout the day. FInished with branded top and bottom cuffs and a woven label.
Is there any worse place on the body than the shin to take a pedal? The answer of course is no, there isn't. And that's exactly why these Knee and Shin Pads from Stay Strong exist. They use E3T foam to provide lightweight protection against slams and impacts with a patella pad for more specific protection for kneecaps. Their lycra construction and mesh backing keep the pads comfortably in place and allow for airflow to get through. Gel printed silicon grips across the top and bottom bands of the pads help them stay firmly in place against your skin. To finish Stay Strong logos feature across the top and bottom bands with a printed logo adding the finishing touch.
The Stay Strong Reactiv Knee Pads are a durable, reliable and comfortable way to keep your knees protected whether you're on the track or the trails. Utilising lightweight E3T foam to protect your knees from slams and cushion impacts, with their lycra body and mesh backing ensuring they're comfortable, breathable and fit snug too. They feature a gel print silicon grip inside the top and bottom bands to help keep them in place throughout the day. FInished with branded top and bottom cuffs and a debossed logo.
The Stay Strong Conflict Knee Guard is a durable, reliable and comfortable way to keep your knees protected whether you're on the track or the trails. Utilising covered, lightweight E3T foam to protect your knees from slams and cushion impacts, with their lycra body and mesh backing ensuring they're comfortable, breathable and fit snug too. They feature a gel print silicon grip inside the top and bottom bands to help keep them in place throughout the day. FInished with branded top and bottom cuffs and a printed pad cover.
Your elbows are usually the first thing to make contact with the ground in most slams so get them wrapped up and protected with the Stay Strong Reactiv Elbow Guard. E3T foam throughout adds lightweight protection where it's needed most, the foam is lightweight and durable keeping the guard easy wearing for long periods of time and always offering the same level of protection. The lycra body paired with mesh backing makes sure the Reactiv Elbow Guard fits comfortably and allows air to flow through the mesh to keep you cool. Stay Strong have utilised gel print silicon grip on the inside of the top and bottom bands to keep the Reactiv Guard firmly in place.
Super soft grips designed by Edwin Delarosa. The grips are made from Krayton rubber and feature a kind of patch work mushroom pattern. These are the flangeless versions and come supplied with Animal push in plastic barends. ###section### Product Specs DIAMETER: 32mm LENGTH: 140mm PACK SIZE: 2 (Pair)
The Colin Varanyak signature bar. With a 9.5" Rise, Multi Butted Chromoly. Post weld heat treatment. ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
The Animal Hamilton Pedal is Steven Hamiltons signature model, utilising a simple and strong design. Made from a lightweight alloy they feature removeable pedal pins that's screw in from the underside of the pedal allowing you to change how much grip you prefer. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Alloy BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: TBC